• Send Us a Message
  • Hustler Raptor SD Parts

    All Hustler Parts Diagrams

    Welcome to the Hustler Raptor SD parts lookup page. All parts are OEM replacement parts from the Hustler Turf Warehouse in Heston, Kansas. This section is for all Hustler Raptor SD models.

    All parts listed below are available and ship same day if in stock. If the parts are not in stock, lead time is 3 days. If you have any questions or would like help with parts lookup, give us a call and we will be happy to help!

    410-692-5170

    Section 1: Frame, Fenders, Instrument Panels, Wire Harness, Engine Guard & Battery

    Item Part No. Description Qty Needed
    1 123637-3 SEAT SUPPORT 1
    2 123636-3 SPRING SUPPORT 1
    3 029629 CS .375-16X0.75 HXF G5ZN 10
    4 604176 CS .375-16X.75 HXF NF 30
    5 552564 ORDER 125255 KIT 1
    6 602041 DECAL, HOT 1
    7 553148 SERVICE, BUMPER STAMPED 1
    Not Shown 552217 SERVICE, BUMPER 1
    8 551858 SVC, ENGINE PLATE 1
    9 604177 NT .375-16 HXFLK PLN 30
    10 552565 ORDER 125255 KIT 1
    11 601982 CN .250-20X .150 MAX THK 5
    12 552566 ORDER 125255 KIT 2
    13 551866 SVC, RS FRAME CHANNEL 1
    Not Shown 552407 SVC, RS FRM CHNL 1
    14 552567 ORDER 125255 KIT 2
    15 551861 SVC, CROSS SUPPORT 2
    16 016899 NT .375-16 FLKG5 10
    17 551868 SVC, LS FRAME CHANNEL 1
    18 N/A SERIAL NUMBER / SPEC DECAL 3
    19 601967 DECAL, ENGINE COMPART 1
    20 605782 DECAL, LEVEL FUEL BLOWM 1
    21 553217 SVC, FRONT CROSS W/A 1
    22 553401 SVC, FAIRING LT W/DECAL 1
    23 551865 SVC, FOOT PAN 1
    24 552569 SVC, FAIRING 1
    25 601981 DECAL, SAFE OPERATE-GRAY 1
    26 604307 MOUNT, PUSH BUTTON 6
    27 000331 WIRE TIE, SMALL/SHORT 6
    28 552570 BATTERY TRAY 1
    29 125255 KIT, HYDRO BRACKETS 1

    1. Serial number decal. In the event the serial number decal becomes damaged or illegible, please contact your dealer to order a replacement.

    2. EPA compliance decal.

    3. Patent numbers decal.

    4. 551866 is used on mowers with model numbers ending in "US". 552407 is used on all other domestic mower models.

    5. 553148 is used on mowers S/N 16035971 & Higher. 552217 is used on mowers S/N Prior To 16035971.

    6. Torque all hardware to a minimum of 33 ft-lbs.

    7. The bumper, RS frame channel, LS frame channel, LS fairing & foot pan include decals.

    Item Part Number Description Qty Needed
    1 123637-3 SEAT SUPPORT 1
    2 123636-3 SPRING SUPPORT 1
    3 029629 CS .375-16X0.75 HXF G5ZN 10
    4 604176 CS .375-16X.75 HXF NF 30
    5 552564 ORDER 125255 KIT 1
    6 602041 DECAL, HOT 1
    7 553148 SERVICE, BUMPER STAMPED 1
    Not Shown 552217 SERVICE, BUMPER 1
    8 551858 SVC, ENGINE PLATE 1
    9 604177 NT .375-16 HXFLK PLN 30
    10 601982 CN .250-20X .150 MAX THK 5
    11 552565 ORDER 125255 KIT 1
    12 552566 ORDER 125255 KIT 2
    13 551866 SVC, RS FRAME CHANNEL 1
    Not Shown 552407 SVC, RS FRM CHNL 1
    14 016899 NT .375-16 FLKG5 10
    15 551861 SVC, CROSS SUPPORT 2
    16 552567 ORDER 125255 KIT 2
    17 N/A SERIAL NUMBER / SPEC DECAL 3
    18 552406 SVC, LS FRM CHNL 1
    19 601967 DECAL, ENGINE COMPART 1
    20 605782 DECAL, LEVEL FUEL BLOWM 1
    21 552568 FRONT CROSS FRAME W/A 1
    22 552569 SVC, FAIRING 2
    23 551865 SVC, FOOT PAN 1
    24 604307 MOUNT, PUSH BUTTON 6
    25 601981 DECAL, SAFE OPERATE-GRAY 1
    26 000331 WIRE TIE, SMALL/SHORT 6
    27 552569 SVC, FAIRING 1
    28 552570 BATTERY TRAY 1
    29 125255 KIT, HYDRO BRACKETS 1

    1. Serial number decal. In the event the serial number decal becomes damaged or illegible, please contact your dealer to order a replacement.

    2. EPA compliance decal.

    3. Patent numbers decal.

    4. 551866 is used on mowers with model numbers ending in "US". 552407 is used on all other domestic mower models.

    5. 553148 is used on mowers S/N 16033155 & higher. 552217 is used on mowers S/N prior to 16033155.

    6. Torque all hardware to a minimum of 33 ft-lbs.

    7. The bumper (552217), RS frame channel (552407), LS frame channel (552406), LS fairing, & foot pan (551865) include decals.

    Item Part Number Description Qty Needed
    1 123637-3 SEAT SUPPORT 1
    2 123636-3 SPRING SUPPORT 1
    3 029629 CS .375-16X0.75 HXF G5ZN 10
    4 604176 CS .375-16X.75 HXF NF 30
    5 552564 ORDER 125255 KIT 1
    6 602041 DECAL, HOT 1
    7 553148 SERVICE, BUMPER STAMPED 1
    Not Shown 552217 SERVICE, BUMPER 1
    8 551858 SVC, ENGINE PLATE 1
    9 604177 NT .375-16 HXFLK PLN 30
    10 552565 ORDER 125255 KIT 1
    11 601982 CN .250-20X .150 MAX THK 5
    12 552566 ORDER 125255 KIT 2
    13 551866 SVC, RS FRAME CHANNEL 1
    Not Shown 552407 SVC, RS FRM CHNL 1
    14 552567 ORDER 125255 KIT 2
    15 551861 SVC, CROSS SUPPORT 2
    16 016899 NT .375-16 FLKG5 10
    17 552406 SVC, LS FRM CHNL 1
    18 601967 DECAL, ENGINE COMPART 1
    19 N/A SERIAL NUMBER / SPEC DECAL 3
    20 552568 FRONT CROSS FRAME W/A 1
    21 552569 SVC, FAIRING 2
    22 551865 SVC, FOOT PAN 1
    23 605782 DECAL, LEVEL FUEL BLOWM 1
    24 601981 DECAL, SAFE OPERATE-GRAY 1
    25 604307 MOUNT, PUSH BUTTON 6
    26 000331 WIRE TIE, SMALL/SHORT 6
    27 552570 BATTERY TRAY 1
    28 600899 DECAL, PUMP BELT WARNING 1
    29 125255 KIT, HYDRO BRACKETS 1

    1. Serial number decal. In the event the serial number decal becomes damaged or illegible, please contact your dealer to order a replacement.

    2. EPA compliance decal.

    3. Patent numbers decal.

    4. 551866 is used on mowers with model numbers ending in "US". 552407 is used on all other domestic mower models.

    5. 553148 is used on mowers S/N 16036470 & higher. 552217 is used on mowers S/N prior to 16036470.

    6. Torque all hardware to a minimum of 33 ft-lbs.

    7. The bumper (552217), engine plate (551858), RS frame channel (552407), LS frame channel (552406), & foot pan (551865) include decals.

    Item Part Number Description Qty Needed
    1 122817 KIT, ENGINE GUARD (#1-5) 1
    2 604745 DECAL, H LOGO, MFSD 36/4 1
    3 029629 CS .375-16X0.75 HXF G5ZN 4
    4 016899 NT .375-16 FLKG5 4
    5 602041 DECAL, HOT 1

     

    Item Part Number Description Qty Needed
    1 119597 KIT, ENGINE GUARD (#1-5) 1
    2 604745 DECAL, H LOGO, MFSD 36/4 1
    3 029629 CS .375-16X0.75 HXF G5ZN 4
    4 016899 NT .375-16 FLKG5 4
    5 602041 DECAL, HOT 1

     

    Item Part Number Description Qty Needed
    1 601097 CABLE, CHOKE 1
    2 776476 SWITCH, PTO 6201-321 1
    3 769166 HOUR METER 1
    4 785808 KEY ASSEMBLY 1
    5 552300 SERVICE, INSTR PANEL 1
    6 604889 DECAL, INSTRUMENT PANEL 1
    7 045898 IGNITION SWITCH 1
    8 055939 CS .250-20X0.75 HX G5 ZN 1
    9 601098 CB 10-24 X .500 ZYNC 2
    10 704932 FW 0.219X.50X.05 ZN 2
    11 059832 NT #10-24 HX NL ZN 2
    12 601096 CABLE, THROTTLE 1
    13 604324 CS .250-20 X .75 HX FLG 8
    14 552809 SVC, FENDER RS 1
    15 552810 SVC, FENDER LS 1
    16 601982 CN .250-20X .150 MAX THK 1
    17 552414 SVC, FOOTREST 1
    18 602407 DECAL, HUSTLER ID 1
    19 029629 CS .375-16X0.75 HXF G5ZN 2
    20 016899 NT .375-16 FLKG5 2
    21 000331 WIRE TIE, SMALL/SHORT 2
    22 604388 DECAL, RAPTOR FENDER 2
    23 600899 DECAL, PUMP BELT WARNING 1
    24 604876 WIRE HARNESS 1
    25 114052 KIT, CLUTCH CONN. REP. 1
    26 601053 RELAY, SEALED W/BRACKET 2

    1. Instrument panel (552300) includes the decal (604889).

    2. Footrest (552414) includes the decal (602407).

    Item Part Number Description Qty Needed
    1 769166 HOUR METER 1
    2 776476 SWITCH, PTO 6201-321 1
    3 785808 KEY ASSEMBLY 1
    4 551898 SERVICE, INSTR PANEL 1
    5 605996 DECAL, INSTRUMENT PANEL 1
    6 045898 IGNITION SWITCH 1
    7 055939 CS .250-20X0.75 HX G5 ZN 1
    8 601098 CB 10-24 X .500 ZYNC 2
    9 704932 FW 0.219X.50X.05 ZN 2
    10 059832 NT #10-24 HX NL ZN 2
    11 768879 CABLE, THROTTLE 1
    12 604324 CS .250-20 X .75 HX FLG 8
    13 552809 SVC, FENDER RS 1
    14 552810 SVC, FENDER LS 1
    15 601982 CN .250-20X .150 MAX THK 1
    16 552414 SVC, FOOTREST 1
    17 602407 DECAL, HUSTLER ID 1
    18 029629 CS .375-16X0.75 HXF G5ZN 2
    19 016899 NT .375-16 FLKG5 2
    20 000331 WIRE TIE, SMALL/SHORT 1
    21 604388 DECAL, RAPTOR FENDER 2
    22 600899 DECAL, PUMP BELT WARNING 1
    23 114052 KIT, CLUTCH CONN. REP 1
    24 601053 RELAY, SEALED W/BRACKET 2
    25 605835 WIRE HARNESS 1

    1. The instrument panel (551898) includes the decal (605996).

    2. The relay (601053) includes a bracket.

    3. The fenders (552809, 552810) include decals.

    4. The footrest (552414) includes the decal (602407).

    Item Part Number Description Qty Needed
    1 604178 STRAP, TIE DOWN 1
    2 604465 CS .250-20X7.50 HX G5 ZN 2
    3 768515 FW 0.281SAE 2
    4 771428 BATTERY CBL BOOT-RED(FS) 1
    5 024927 NT .250-20HXG5 2
    6 029868 LW .250 INTEXT ZN 4
    7 055939 CS .250-20X0.75 HX G5 ZN 2
    8 000331 WIRE TIE, SMALL/SHORT 2
    9 601982 CN .250-20X .150 MAX THK 2

    1. When performing service on the mower, disconnect the negative battery cable and do not reconnect it to the battery until the engine is ready to be started.

    Section 2: Transmission, Drive Belt, Steering & Brake

    Item Part Number Description Qty Needed
    1 710087 CS .312-18X2.500HXG5 4
    2 601887 CB .375-16 X 2.25 STD ZN 1
    3 043067 CS .312-18X3.000HXG5 4
    4 016899 NT .375-16 FLKG5 3
    5 607400 DRIVE BELT 1
    6 604714 SPACER, IDLER 1
    7 116287 IDLER ARM 1
    8 712893 FW 0.406X1.25X.12 HD ZN 1
    9 086660 NT .375-16NLG8 2
    10 080655 CS .375-16X1.500HXG5 1
    11 767954 FW 0.379X.82X.06 HD ZN 2
    12 604491 PULLEY, 2.0" IDLER 1
    13 054502 NT .375-16HXG5 1
    14 604490 SPRING, 3.00 X .50 EXT 1
    15 005108 CS .375-16X3.500HXG5 1
    16 706549 HP0.080X1.190 2
    17 118310 LINK, TOW VALVE 2
    18 768523 FW 0.343SAE 16
    19 058776 NT .312-18NLG5 8
    20 029629 CS .375-16X0.75 HXF G5ZN 1

    1. Torque to 17 ft-lbs.

     

    Item Part Number Description Qty Needed
    1 058776 NT .312-18NLG5 2
    2 768523 FW 0.343SAE 6
    3 601051 OVERTRAVEL SPRING 2
    4 601131 SPRING, BRAKE ARM RET 2
    5 604667 ROD, BRAKE ACTUATOR 2
    6 601219 FTG, 90 - 9/16 SAE 2
    7 604709 ZT2800, 20.69:1 TRANS 1
    8 005108 CS .375-16X3.500HXG5 2
    9 767954 FW 0.379X.82X.06 HD ZN 4
    10 601001 SPRING CLAMP, .75" DIA 4
    11 787713 HOSE, 1/2" LOW PRESSURE 19"
    12 787713 HOSE, 1/2" LOW PRESSURE 28"
    13 000331 WIRE TIE, SMALL/SHORT 2
    14 086660 NT .375-16NLG8 2
    15 123292 KIT, CROSS BRACE 1
    16 604708 ZT2800, 20.69:1 TRANS 1
    17 055939 CS .250-20X0.75 HX G5 ZN 2
    18 109203 BRAKE SPRING LINK, LS 1
    19 016816 NT .250-20FLKG5 2
    20 109202 BRAKE SPRING LINK, RS 1
    21 068551 NT .250-20 HXZY NL 2
    22 768515 FW 0.281SAE 4
    23 118284 EXPANSION TANK MNT 1
    24 601996 EXPANSION TANK, ZT2800 1
    25 055939 CS .250-20X0.75 HX G5 ZN 2
    26 600767 CAP, OVERFLOW TANK 1

    HOSE LENGTHS

    A: 19" RIGHT TRANSMISSION TO OVERFLOW TANK

    B: 28" LEFT TRANSMISSION TO OVERFLOW TANK

    1. Torque to 30 ft-lbs.

    Item Part Number Description Qty Needed
    -- 604708 TRANSMISSION ASSY RS 1
    1 602094 FAN / PULLEY KIT 1
    2 607729 FAN - 7.0" (10 BLADE) 1
    3 600975 GUARD, TRANS FILTER 1
    4 604324 CS .250-20 X .75 HX FLG 3
    5 600976 HYDRAULIC OIL FILTER 1
    6 604901 HG RTN CW 1
    7 604903 HG RTN SPRING 1
    8 600970 KIT, HUB, 4 BOLT 1
    9 601221 ZT2800 BRAKE ARM - 2007 1
    10 600972 CLIP, RETAINING 1
    11 603223 O-RING, ZT28/3100 CHARGE 1
    12 603572 COVER, ZT3100 CHRG PUMP 1
    13 606830 OIL RETENSION KIT 1
    14 607199 SEAL KIT 72994 HYDRO-G 1
    15 607869 TUBE - SEALANT 1
    16 607870 KIT - SIDE COVER, RH 1

    1. Hub kit (600970) includes the hub nut

    Item Part Number Description Qty Needed
    -- 604709 TRANSMISSION ASSY LS 1
    1 602094 FAN / PULLEY KIT 1
    2 607729 FAN - 7.0" (10 BLADE) 1
    3 600974 GUARD, TRANS FILTER 1
    4 604324 CS .250-20 X .75 HX FLG 3
    5 600976 HYDRAULIC OIL FILTER 1
    6 600970 KIT, HUB, 4 BOLT 1
    7 604902 HG RTN CCW 1
    8 604903 HG RTN SPRING 1
    9 601221 ZT2800 BRAKE ARM - 2007 1
    10 600972 CLIP, RETAINING 1
    11 603223 O-RING, ZT28/3100 CHARGE 1
    12 603572 COVER, ZT3100 CHRG PUMP 1
    13 606830 OIL RETENSION KIT 1
    14 607199 SEAL KIT 72994 HYDRO-G 1
    15 607869 TUBE - SEALANT 1
    16 607871 KIT - SIDE COVER, LH 1

    1. Hub kit (600970) includes the hub nut.

    Item Part Number Description Qty Needed
    1 603983 DAMPER 2
    2 781922 BALL STUD 4
    3 768523 FW 0.343SAE 6
    4 058776 NT .312-18NLG5 2
    5 601069 CN .312-18x.200 MAX THK 2
    6 772483 SB0.312X0.750SH0.250-20 2
    7 604173 YOKE, 5/16-24 2
    8 041152 NT 0.312-24 HX G8 6
    9 604666 ROD, STEERING 2
    10 768515 FW 0.281SAE 2
    11 068551

    NT .250-20 HXZY NL

    2
    12 110370 STEERING BAR W/ GRIP 2
    REF 781260 GRIP, STEERING BAR 1
    13 054502 NT .375-16HXG5 4
    14 767954 FW 0.379X.82X.06 HD ZN 8
    15 080655 CS .375-16X1.500HXG5 4
    16 029629 CS .375-16X0.75 HXF G5ZN 7
    17 016899 NT .375-16 FLKG5 7
    18 034272 NT .312-18HXG5 2
    19 116144 BLOCK, STEERING CONTROL 2
    20 603332 CLIP E .66 X .303 X .035 2
    21 N/A STEERING COVER ASSEMBLY 1

    1. Part of the transmission assembly.

    2. The steering bar (110370) includes the grip (781260).

    Item Part Number Description Qty Needed
    1 603983 DAMPER 2
    2 781922 BALL STUD 4
    3 768523 FW 0.343SAE 6
    4 058776 NT .312-18NLG5 2
    5 601069 CN .312-18x.200 MAX THK 2
    6 772483 SB0.312X0.750SH0.250-20 2
    7 606273 STEERING ROD S/A 2
    8 768515 FW 0.281SAE 2
    9 068551 NT .250-20 HXZY NL 2
    10 023655 NT 0.312-24 NL G8 2
    11 603332 CLIP E .66 X .303 X .035 2
    12 110370 STEERING BAR W/ GRIP 2
    Not Shown 781260 GRIP, STEERING BAR 1
    13 767954 FW 0.379X.82X.06 HD ZN 4
    14 036244 CS .375-16X1.00 HX G5 ZN 4
    15 029629 CS .375-16X0.75 HXF G5ZN 7
    16 016899 NT .375-16 FLKG5 7
    17 034272 NT .312-18HXG5 2
    18 N/A STEERING COVER ASSEMBLY 1
    19 604173 YOKE, 5/16-24 2
    20 041152 NT 0.312-24 HX G8 6
    21 604666 ROD, STEERING 2
    22 116144 BLOCK, STEERING CONTROL 2

    1. Part of the transmission assembly.

    2. Torque to 14 ft-lbs.

    3. The steering bar (110370) includes the grip (781260).

    Item Part Number Description Qty Needed
    1 604452 CS .250-20X2.00 HX FH ZN 2
    2 768515 FW 0.281SAE 4
    3 605529 STOP, STEERING 2
    4 055939 CS .250-20X0.75 HX G5 ZN 2
    5 601822 NUT PLATE, .420 CENTERS 2
    6 781211 SWITCH, PUSH BUTTON 2
    7 086660 NT .375-16NLG8 3
    8 552415 SVC, STEERING S/A 1
    9 781708 CS .500-13X4.25 HX G5 ZN 2
    10 604288 SPACER, STEERING 2
    11 604300 STEERING BOX SUB, LH 1
    12 768523 FW 0.343SAE 8
    13 058776 NT .312-18NLG5 4
    14 604179 BRAKE LINK 2
    15 765339 BUSHING,IGUS#0608 (FS) 4
    16 116142 BRAKE BLCRNK, LH 1
    17 781567 NT .500-13NLG5 2
    18 063198 CS #10-24X0.750FLKG5 4
    19 005108 CS .375-16X3.500HXG5 2
    20 604299 STEERING BOX SUB, RH 1
    21 116141 BRAKE BLCRNK, RH 1
    22 605149 TRANSPORT LATCH 1
    23 767954 FW 0.379X.82X.06 HD ZN 2
    24 029629 CS .375-16X0.75 HXF G5ZN 1
    25 552177 SERVICE, INDICATOR PANEL 1
    26 604819 DECAL, DECK HEIGHT 1
    27 056036 CS .375-16X2.250HXG5 1
    28 016899 NT .375-16 FLKG5 1
    29 785220 DECAL, STEERING R.S. 1
    30 604840 DECAL, ID RSD 1
    Not Shown 606514 DECAL, RAPTOR SDX 1
    31 785139 DECAL, STEERING L.S. 1
    32 781153 BUSHING, UHMW 4

    1. 606106 and 606105 are used on mowers S/N 15100000 & higher. 604300 and 604299 are used on mowers S/N prior to 15100000.

    2. The steering cover (552415) includes decals.

    3. The deck height indicator (552177) includes the decal (604819).

    4. 604840 is used on Raptor SD mowers. 606514 is used on Raptor SDX mowers.

    Section 3: Wheels & Tires

    Item Part Number Description Qty Needed
    1 606023 TIR/WHL 20X6.50-10 SLV 2
    2 061077 WHEEL NUT 8
    3 705954 CS .500-13X1.25 HX G5 ZN 2
    4 344267 FW .510X2.15X.19 ZN 2
    5 712976 FW 0.531X1.38X.12 ZN 2
    6 784223 BEARING 4
    7 784603 SPACER 2
    8 469924 GAGE WHEEL SPACER 1/4" 2
    9 605038 TIR/WHL 13X5.00-6 SLV 2

    1. Torque to 65–75 ft-lbs

    Item Part Number Description Qty Needed
    1 604503 TIR 20X6.50-10 B4R GRMR 1
    2 606022 WHL 10X6.00 4X4.0 SLV 1
    3 019521 TIRE VALVE TR-412 GOODY 1

     

    Item Part Number Description Qty Needed
    1 600676 TIR/WHL 20X8.00-10 SLV 2
    2 061077 WHEEL NUT 8
    3 705954 CS .500-13X1.25 HX G5 ZN 2
    4 344267 FW .510X2.15X.19 ZN 2
    5 712976 FW 0.531X1.38X.12 ZN 2
    6 784223 BEARING 4
    7 784603 SPACER 2
    8 605038 TIR/WHL 13X5.00-6 SLV 2

    1. Torque to 65–75 ft-lbs.

    Item Part Number Description Qty Needed
    1 600692 TIR 20X8.00-10 B4R GRMR 1
    2 600718 WHL 10X7.00 4X4.0 SLV 1
    3 019521 TIRE VALVE TR-412 GOODY 1

     

    Item Part Number Description Qty Needed
    1 605042 FORK W/A, 13X5 1
    2 061101 NT .750-10 HX ZN NL GR B 1
    3 025296 FW .760X1.63X0.08 ZN 2
    4 786731 CS .750-10X8.000HXG5 1
    5 605038 TIR/WHL 13X5.00-6 SLV 1
    6 605039 TIR 13X5.00-6 B4R SMTH 1
    7 786103 WHEEL BEARING 2
    8 786079 WHL 6X3.25 SLV 1
    9 019521 TIRE VALVE TR-412 GOODY 1

     

    Item Part Number Description Qty Needed
    1 601349 TIR/WHL 20X12.00-10 SLV 2
    2 061077 WHEEL NUT 8
    3 705954 CS .500-13X1.25 HX G5 ZN 2
    4 344267 FW .510X2.15X.19 ZN 2
    5 712976 FW 0.531X1.38X.12 ZN 2
    6 784223 BEARING 4
    7 784603 SPACER 2
    8 604717 TIR/WHL 13X6.50-6 SLV 2

    1. Torque to 65–75 ft-lbs.

    Item Part Number Description Qty Needed
    1 601348 TIR 20X12.00-10 B4R GRMR 1
    2 601347 WHL 10X8.50 4X4.0 SLV 1
    3 019521 TIRE VALVE TR-412 GOODY 1

     

    Item Part Number Description Qty Needed
    1 604691 FORK W/A 1
    2 041475 CS .750-10X9.50 HX G5 ZN 1
    3 025296 FW .760X1.63X0.08 ZN 2
    4 061101 NT .750-10 HX ZN NL GR B 1
    5 604717 TIR/WHL 13X6.50-6 SLV 1
    6 604843 TIR 13X6.50-6 B4R SMTH 1
    7 604845 BEARING, WHEEL SEALED 2
    8 604844 WHL 6X4.50 SLV 1
    9 019521 TIRE VALVE TR-412 GOODY 1

     

    Section 4: Engine, Clutch & Fuel System

    Kawasaki Engines-48"/54" Mowers

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR691V 1
    2 604463 HOSE, OIL DRAIN 12"
    3 604016 MUFFLER, FR730V 1
    4 016899 NT .375-16 FLKG5 1
    5 121625 CLUTCH ANCHOR 1
    6 767954 FW 0.379X.82X.06 HD ZN 5
    7 602580 CS .375-16X1.25HXG8ZYP85 4
    8 036244 CS .375-16X1.00 HX G5 ZN 1
    9 000331 WIRE TIE, SMALL/SHORT 4
    10 712372 KEY 1/4 SQ X 0.66 LG(FS) 1
    11 605675 PULLEY, ENG 4.118 OP 1
    12 605777K CLUTCH KIT, 605777 1
    13 602680 FW .453X1.12X.12 HRD ZN 1
    14 601834 CS .437-20X3.25 HXG5 P85 1
    15 605595 BUSHING, CLUTCH 1
    16 791251 HARNESS, CLUTCH PIGTAIL 1
    17 029876 LW .312 INTEXT ZN 1
    18 720516 CS M8-1.25X16HX FL10.9 1
    19 055939 CS .250-20X0.75 HX G5 ZN 2
    20 768515 FW 0.281SAE 4
    21 030817 STARTER SOLENOID HW KIT 1
    22 044255 NT #10-32HXG5 1
    23 024927 NT .250-20HXG5 2
    24 000323 CLIP, HOSE CLAMP 2
    25 015818 FUEL LINE, 1/4" 18"
    26 604274 VAPOR LINE, 3/16 FORMED 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the fuel system.

    6. Part of the wire harness.

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR691V 1
    2 604369 O-RING 1
    3 604350 VALVE, OIL DRAIN 1
    4 604463 HOSE, OIL DRAIN 12"
    5 604016 MUFFLER, FR730V 1
    6 016899 NT .375-16 FLKG5 1
    7 118238 CLUTCH ANCHOR 1
    8 767954 FW 0.379X.82X.06 HD ZN 5
    9 036244 CS .375-16X1.00 HX G5 ZN 1
    10 602580 CS .375-16X1.25HXG8ZYP85 4
    11 000331 WIRE TIE, SMALL/SHORT 4
    12 604712 PULLEY, PUMP STUB SHAFT 1
    13 604713K CLUTCH KIT, RSD 1
    14 602680 FW .453X1.12X.12 HRD ZN 1
    15 605448 CS .437-20X4.75 HXG5 P85 1
    16 791251 HARNESS, CLUTCH PIGTAIL 1
    17 055939 CS .250-20X0.75 HX G5 ZN 2
    18 768515 FW 0.281SAE 4
    19 044255 NT #10-32HXG5 1
    20 030817 STARTER SOLENOID HW KIT 1
    21 024927 NT .250-20HXG5 2
    22 029876 LW .312 INTEXT ZN 1
    23 720516 CS M8-1.25X16HX FL10.9 1
    24 000323 CLIP, HOSE CLAMP 2
    25 015818 FUEL LINE, 1/4" 18"
    26 604274 VAPOR LINE, 3/16 FORMED 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the fuel system.

    6. Part of the wire harness.

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR691V 1
    2 604369 O-RING 1
    3 604350 VALVE, OIL DRAIN 1
    4 604463 HOSE, OIL DRAIN 12"
    5 604016 MUFFLER, FR730V 1
    6 016899 NT .375-16 FLKG5 1
    7 118238 CLUTCH ANCHOR 1
    8 767954 FW 0.379X.82X.06 HD ZN 5
    9 036244 CS .375-16X1.00 HX G5 ZN 1
    10 602580 CS .375-16X1.25HXG8ZYP85 4
    11 000331 WIRE TIE, SMALL/SHORT 4
    12 604712 PULLEY, PUMP STUB SHAFT 1
    13 604713K CLUTCH KIT, RSD 1
    14 602680 FW .453X1.12X.12 HRD ZN 2
    15 604721 CS .437-20X5.00 HXG5 P85 1
    16 791251 HARNESS, CLUTCH PIGTAIL 1
    17 045765 FW 1.030X1.50X.13 HD ZN 1
    18 055939 CS .250-20X0.75 HX G5 ZN 2
    19 768515 FW 0.281SAE 4
    20 044255 NT #10-32HXG5 1
    21 030817 STARTER SOLENOID HW KIT 1
    22 024927 NT .250-20HXG5 2
    23 029876 LW .312 INTEXT ZN 1
    24 720516 CS M8-1.25X16HX FL10.9 1
    25 000323 CLIP, HOSE CLAMP 2
    26 015818 FUEL LINE, 1/4" 18"
    27 604274 VAPOR LINE, 3/16 FORMED 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the fuel system.

    6. Part of the wire harness

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR691V 1
    2 604369 O-RING 1
    3 604350 VALVE, OIL DRAIN 1
    4 604463 HOSE, OIL DRAIN 12"
    5 604016 MUFFLER, FR730V 1
    6 016899 NT .375-16 FLKG5 1
    7 121625 CLUTCH ANCHOR 1
    8 767954 FW 0.379X.82X.06 HD ZN 5
    9 036244 CS .375-16X1.00 HX G5 ZN 1
    10 602580 CS .375-16X1.25HXG8ZYP85 4
    11 000331 WIRE TIE, SMALL/SHORT 5
    12 605675 PULLEY, ENG 4.118 OP 1
    13 712372 KEY 1/4 SQ X 0.66 LG(FS) 1
    14 605777K CLUTCH KIT, 605777 1
    Not Shown 791251 HARNESS, CLUTCH PIGTAIL 1
    15 605595 BUSHING, CLUTCH 1
    16 602680 FW .453X1.12X.12 HRD ZN 1
    17 601834 CS .437-20X3.25 HXG5 P85 1
    18 055939 CS .250-20X0.75 HX G5 ZN 2
    19 768515 FW 0.281SAE 4
    20 044255 NT #10-32HXG5 1
    21 030817 STARTER SOLENOID HW KIT 1
    22 024927 NT .250-20HXG5 2
    23 029876 LW .312 INTEXT ZN 1
    24 720516 CS M8-1.25X16HX FL10.9 1
    25 000323 CLIP, HOSE CLAMP 2
    26 015818 FUEL LINE, 1/4" 18"
    27 603326 VAPOR LINE, 3/16" 38"
    28 603112 CLAMP, 3/16 FUEL 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the wire harness

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR691V 1
    2 604369 O-RING 1
    3 604350 VALVE, OIL DRAIN 1
    4 604463 HOSE, OIL DRAIN 12"
    5 604016 MUFFLER, FR730V 1
    6 016899 NT .375-16 FLKG5 1
    7 118238 CLUTCH ANCHOR 1
    8 767954 FW 0.379X.82X.06 HD ZN 5
    9 036244 CS .375-16X1.00 HX G5 ZN 1
    10 602580 CS .375-16X1.25HXG8ZYP85 4
    11 000331 WIRE TIE, SMALL/SHORT 5
    12 604712 PULLEY, PUMP STUB SHAFT 1
    13 604713K CLUTCH KIT, RSD 1
    14 602680 FW .453X1.12X.12 HRD ZN 1
    15 605448 CS .437-20X4.75 HXG5 P85 1
    16 791251 HARNESS, CLUTCH PIGTAIL 1
    17 055939 CS .250-20X0.75 HX G5 ZN 2
    18 768515 FW 0.281SAE 4
    19 044255 NT #10-32HXG5 1
    20 030817 STARTER SOLENOID HW KIT 1
    21 024927 NT .250-20HXG5 2
    22 029876 LW .312 INTEXT ZN 1
    23 720516 CS M8-1.25X16HX FL10.9 1
    24 000323 CLIP, HOSE CLAMP 2
    25 015818 FUEL LINE, 1/4" 18"
    26 603326 VAPOR LINE, 3/16" 38"
    27 603112 CLAMP, 3/16 FUEL 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the wire harness.

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR691V 1
    2 604369 O-RING 1
    3 604350 VALVE, OIL DRAIN 1
    4 604463 HOSE, OIL DRAIN 12"
    5 604016 MUFFLER, FR730V 1
    6 016899 NT .375-16 FLKG5 1
    7 118238 CLUTCH ANCHOR 1
    8 767954 FW 0.379X.82X.06 HD ZN 5
    9 036244 CS .375-16X1.00 HX G5 ZN 1
    10 602580 CS .375-16X1.25HXG8ZYP85 4
    11 000331 WIRE TIE, SMALL/SHORT 5
    12 604712 PULLEY, PUMP STUB SHAFT 1
    13 604713K CLUTCH KIT, RSD 1
    14 602680 FW .453X1.12X.12 HRD ZN 2
    15 604721 CS .437-20X5.00 HXG5 P85 1
    16 791251 HARNESS, CLUTCH PIGTAIL 1
    17 045765 FW 1.030X1.50X.13 HD ZN 1
    18 055939 CS .250-20X0.75 HX G5 ZN 2
    19 768515 FW 0.281SAE 4
    20 044255 NT #10-32HXG5 1
    21 030817 STARTER SOLENOID HW KIT 1
    22 024927 NT .250-20HXG5 2
    23 029876 LW .312 INTEXT ZN 1
    24 720516 CS M8-1.25X16HX FL10.9 1
    25 000323 CLIP, HOSE CLAMP 2
    26 015818 FUEL LINE, 1/4" 18"
    27 603326 VAPOR LINE, 3/16" 38"
    28 603112 CLAMP, 3/16 FUEL 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the wire harness.

    Item Part Number Description Qty Needed
    1 068478 FUEL FILTER - IN LINE 1
    2 603059 AIR FILTER - MAIN 1
    3 602581 ENGINE OIL FILTER 1

     

    Item Part Number Description Qty Needed
    1 606432 FUEL TANK 1
    2 603807 CAP, 3.5" RATCHETING GAS 1
    3 117059 TANK MNT LEFT 1
    4 117060 TANK MNT RIGHT 1
    5 713198 SEAL 3/8x3/4 SOLD BY FT 18.5"
    6 055939 CS .250-20X0.75 HX G5 ZN 3
    7 768515 FW 0.281SAE 3
    8 604279 VAPOR LINE, 3/16 FORMED 1
    9 604322 1/4" HOSE BARB CROSS 1
    10 604273 VAPOR LINE, 3/16 FORMED 1
    11 604292 BOOT, 3/16" TO 1/4" BARB 1
    12 604323 VAPOR SYSTEM FILTER 1
    13 000331 WIRE TIE, SMALL/SHORT 2
    14 604307 MOUNT, PUSH BUTTON 2
    15 033035 WEATHERSTRIP .12X.75 22"
    16 601400 GM .63 x1.13 x.88 x .13 1

    1. Grommet 601400 is used on mowers S/N 15077829 & higher.

    Weatherstrip & Seal lengths:

    A: 9.25"

    B: 5"

    C: 12"

    Item Part Number Description Qty Needed
    1 768515 FW 0.281SAE 4
    2 024927 NT .250-20HXG5 1
    3 034280 CS .312-18X0.750HXG5 2
    4 768523 FW 0.343SAE 4
    5 117463 CARBON CANISTER MOUNT 1
    6 034272 NT .312-18HXG5 2
    7 604376 CARBON CANISTER, 4 GAL. 1
    8 000323 CLIP, HOSE CLAMP 2
    9 015818 FUEL LINE, 1/4" 13"
    10 603306 TEE, 1/4" PLASTIC 1
    11 604273 VAPOR LINE, 3/16 FORMED 1
    12 604279 VAPOR LINE, 3/16 FORMED 1
    13 055939 CS .250-20X0.75 HX G5 ZN 3
    14 117060 TANK MNT RIGHT 1
    15 117059 TANK MNT LEFT 1
    16 713198 SEAL 3/8x3/4 SOLD BY FT 18.5"
    17 603807 CAP, 3.5" RATCHETING GAS 1
    18 606432 FUEL TANK 1
    19 000331 WIRE TIE, SMALL/SHORT 2
    20 604307 MOUNT, PUSH BUTTON 2
    21 033035 WEATHERSTRIP .12X.75 22"

    Weatherstrip lengths:

    A: 9.25"

    B: 5"

    C: 12"

    D: 13" vapor line from the vapor tee to the carbon canister

    Kawasaki Engine-60" Mowers

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR730V 1
    2 604463 HOSE, OIL DRAIN 12"
    3 604016 MUFFLER, FR730V 1
    4 016899 NT .375-16 FLKG5 1
    5 121625 CLUTCH ANCHOR 1
    6 767954 FW 0.379X.82X.06 HD ZN 5
    7 602580

    CS .375-16X1.25HXG8ZYP85

    4
    8 036244 CS .375-16X1.00 HX G5 ZN 1
    9 000331 WIRE TIE, SMALL/SHORT 4
    10 712372 KEY 1/4 SQ X 0.66 LG(FS) 1
    11 605675 PULLEY, ENG 4.118 OP 1
    12 605777K CLUTCH KIT, 605777 1
    13 602680 FW .453X1.12X.12 HRD ZN 1
    14 601834 CS .437-20X3.25 HXG5 P85 1
    15 605595 BUSHING, CLUTCH 1
    16 791251 HARNESS, CLUTCH PIGTAIL 1
    17 029876 LW .312 INTEXT ZN 1
    18 720516 CS M8-1.25X16HX FL10.9 1
    19 055939 CS .250-20X0.75 HX G5 ZN 2
    20 768515 FW 0.281SAE 4
    21 030817 STARTER SOLENOID HW KIT 1
    22 044255 NT #10-32HXG5 1
    23 024927 NT .250-20HXG5 2
    24 000323 CLIP, HOSE CLAMP 2
    25 015818 FUEL LINE, 1/4" 18"
    26 604274 VAPOR LINE, 3/16 FORMED 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the fuel system.

    6. Part of the wire harness.

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR730V 1
    2 604369 O-RING 1
    3 604350 VALVE, OIL DRAIN 1
    4 604463 HOSE, OIL DRAIN 12"
    5 604016 MUFFLER, FR730V 1
    6 016899 NT .375-16 FLKG5 1
    7 118238 CLUTCH ANCHOR 1
    8 767954 FW 0.379X.82X.06 HD ZN 5
    9 036244 CS .375-16X1.00 HX G5 ZN 1
    10 602580 CS .375-16X1.25HXG8ZYP85 4
    11 000331 WIRE TIE, SMALL/SHORT 4
    12 604712 PULLEY, PUMP STUB SHAFT 1
    13 604713K CLUTCH KIT, RSD 1
    14 602680 FW .453X1.12X.12 HRD ZN 1
    15 605448 CS .437-20X4.75 HXG5 P85 1
    16 791251 HARNESS, CLUTCH PIGTAIL 1
    17 055939 CS .250-20X0.75 HX G5 ZN 2
    18 768515 FW 0.281SAE 4
    19 044255 NT #10-32HXG5 1
    20 030817 STARTER SOLENOID HW KIT 1
    21 024927 NT .250-20HXG5 2
    22 029876 LW .312 INTEXT ZN 1
    23 720516 CS M8-1.25X16HX FL10.9 1
    24 000323 CLIP, HOSE CLAMP 2
    25 015818 FUEL LINE, 1/4" 18"
    26 604274 VAPOR LINE, 3/16 FORMED 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the fuel system.

    6. Part of the wire harness

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR730V 1
    2 604369 O-RING 1
    3 604350 VALVE, OIL DRAIN 1
    4 604463 HOSE, OIL DRAIN 12"
    5 604016 MUFFLER, FR730V 1
    6 016899 NT .375-16 FLKG5 1
    7 118238 CLUTCH ANCHOR 1
    8 767954 FW 0.379X.82X.06 HD ZN 5
    9 036244 CS .375-16X1.00 HX G5 ZN 1
    10 602580 CS .375-16X1.25HXG8ZYP85 4
    11 000331 WIRE TIE, SMALL/SHORT 4
    12 604712 PULLEY, PUMP STUB SHAFT 1
    13 604713K CLUTCH KIT, RSD 1
    14 602680 FW .453X1.12X.12 HRD ZN 2
    15 604721 CS .437-20X5.00 HXG5 P85 1
    16 791251 HARNESS, CLUTCH PIGTAIL 1
    17 045765 FW 1.030X1.50X.13 HD ZN 1
    18 055939 CS .250-20X0.75 HX G5 ZN 2
    19 768515 FW 0.281SAE 4
    20 044255 NT #10-32HXG5 1
    21 030817 STARTER SOLENOID HW KIT 1
    22 024927 NT .250-20HXG5 2
    23 029876 LW .312 INTEXT ZN 1
    24 720516 CS M8-1.25X16HX FL10.9 1
    25 000323 CLIP, HOSE CLAMP 2
    26 015818 FUEL LINE, 1/4" 18"
    27 604274 VAPOR LINE, 3/16 FORMED 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the fuel system.

    6. Part of the wire harness

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR730V 1
    2 604463 HOSE, OIL DRAIN 12"
    3 604016 MUFFLER, FR730V 1
    4 016899 NT .375-16 FLKG5 1
    5 121625 CLUTCH ANCHOR 1
    6 767954 FW 0.379X.82X.06 HD ZN 5
    7 036244 CS .375-16X1.00 HX G5 ZN 1
    8 602580 CS .375-16X1.25HXG8ZYP85 4
    9 000331 WIRE TIE, SMALL/SHORT 5
    10 605675 PULLEY, ENG 4.118 OP 1
    11 712372 KEY 1/4 SQ X 0.66 LG(FS) 1
    12 605777K CLUTCH KIT, 605777 1
    13 791251 HARNESS, CLUTCH PIGTAIL 1
    14 605595 BUSHING, CLUTCH 1
    15 602680 FW .453X1.12X.12 HRD ZN 1
    16 601834 CS .437-20X3.25 HXG5 P85 1
    17 055939 CS .250-20X0.75 HX G5 ZN 2
    18 768515 FW 0.281SAE 4
    19 044255 NT #10-32HXG5 1
    20 030817 STARTER SOLENOID HW KIT 1
    21 024927 NT .250-20HXG5 2
    22 029876 LW .312 INTEXT ZN 1
    23 720516 CS M8-1.25X16HX FL10.9 1
    24 000323 CLIP, HOSE CLAMP 2
    25 015818 FUEL LINE, 1/4" 18"
    26 603326 VAPOR LINE, 3/16" 38"
    27 603112 CLAMP, 3/16 FUEL 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this cap screw.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this cap screw.

    4. Torque to 17 ft-lbs.

    5. Part of the wire harness.

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR730V 1
    2 604369 O-RING 1
    3 604350 VALVE, OIL DRAIN 1
    4 604463 HOSE, OIL DRAIN 12"
    5 604016 MUFFLER, FR730V 1
    6 016899 NT .375-16 FLKG5 1
    7 118238 CLUTCH ANCHOR 1
    8 767954 FW 0.379X.82X.06 HD ZN 5
    9 036244 CS .375-16X1.00 HX G5 ZN 1
    10 602580 CS .375-16X1.25HXG8ZYP85 4
    11 000331 WIRE TIE, SMALL/SHORT 5
    12 604712 PULLEY, PUMP STUB SHAFT 1
    13 604713K CLUTCH KIT, RSD 1
    14 602680 FW .453X1.12X.12 HRD ZN 1
    15 605448 CS .437-20X4.75 HXG5 P85 1
    16 791251 HARNESS, CLUTCH PIGTAIL 1
    17 055939 CS .250-20X0.75 HX G5 ZN 2
    18 768515 FW 0.281SAE 4
    19 044255 NT #10-32HXG5 1
    20 030817 STARTER SOLENOID HW KIT 1
    21 024927 NT .250-20HXG5 2
    22 029876 LW .312 INTEXT ZN 1
    23 720516 CS M8-1.25X16HX FL10.9 1
    24 000323 CLIP, HOSE CLAMP 2
    25 015818 FUEL LINE, 1/4" 18"
    26 603326 VAPOR LINE, 3/16" 38"
    27 603112 CLAMP, 3/16 FUEL 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the wire harness.

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FR730V 1
    2 604369 O-RING 1
    3 604350 VALVE, OIL DRAIN 1
    4 604463 HOSE, OIL DRAIN 12"
    5 604016 MUFFLER, FR730V 1
    6 016899 NT .375-16 FLKG5 1
    7 118238 CLUTCH ANCHOR 1
    8 767954 FW 0.379X.82X.06 HD ZN 5
    9 036244 CS .375-16X1.00 HX G5 ZN 1
    10 602580 CS .375-16X1.25HXG8ZYP85 4
    11 000331 WIRE TIE, SMALL/SHORT 5
    12 604712 PULLEY, PUMP STUB SHAFT 1
    13 604713K CLUTCH KIT, RSD 1
    14 602680 FW .453X1.12X.12 HRD ZN 2
    15 604721 CS .437-20X5.00 HXG5 P85 1
    16 791251 HARNESS, CLUTCH PIGTAIL 1
    17 045765 FW 1.030X1.50X.13 HD ZN 1
    18 055939 CS .250-20X0.75 HX G5 ZN 2
    19 768515 FW 0.281SAE 4
    20 044255 NT #10-32HXG5 1
    21 030817 STARTER SOLENOID HW KIT 1
    22 024927 NT .250-20HXG5 2
    23 029876 LW .312 INTEXT ZN 1
    24 720516 CS M8-1.25X16HX FL10.9 1
    25 000323 CLIP, HOSE CLAMP 2
    26 015818 FUEL LINE, 1/4" 18"
    27 603326 VAPOR LINE, 3/16" 38"
    28 603112 CLAMP, 3/16 FUEL 1

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30–35 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    4. Torque to 17 ft-lbs.

    5. Part of the wire harness.

    Item Part Number Description Qty Needed
    1 068478 FUEL FILTER - IN LINE 1
    2 603059 AIR FILTER - MAIN 1
    3 602581 ENGINE OIL FILTER 1

     

    Item Part Number Description Qty Needed
    1 606432 FUEL TANK 1
    2 603807 CAP, 3.5" RATCHETING GAS 1
    3 117059 TANK MNT LEFT 1
    4 117060 TANK MNT RIGHT 1
    5 713198 SEAL 3/8x3/4 SOLD BY FT 18.5"
    6 055939 CS .250-20X0.75 HX G5 ZN 3
    7 768515 FW 0.281SAE 3
    8 604279 VAPOR LINE, 3/16 FORMED 1
    9 604322 1/4" HOSE BARB CROSS 1
    10 604273 VAPOR LINE, 3/16 FORMED 1
    11 604292 BOOT, 3/16" TO 1/4" BARB 1
    12 604323 VAPOR SYSTEM FILTER 1
    13 000331 WIRE TIE, SMALL/SHORT 2
    14 604307 MOUNT, PUSH BUTTON 2
    15 033035 WEATHERSTRIP .12X.75 22"
    16 601400 GM .63 x1.13 x.88 x .13 1

    1. Grommet 601400 is used on mowers S/N 15077829 & higher.

    Item Part Number Description Qty Needed
    1 768515 FW 0.281SAE 4
    2 024927 NT .250-20HXG5 1
    3 034280 CS .312-18X0.750HXG5 2
    4 768523 FW 0.343SAE 4
    5 117463 CARBON CANISTER MOUNT 1
    6 034272 NT .312-18HXG5 2
    7 604376 CARBON CANISTER, 4 GAL 1
    8 000323 CLIP, HOSE CLAMP 2
    9 015818 FUEL LINE, 1/4" 13"
    10 603306 TEE, 1/4" PLASTIC 1
    11 604273 VAPOR LINE, 3/16 FORMED 1
    12 604279 VAPOR LINE, 3/16 FORMED 1
    13 055939 CS .250-20X0.75 HX G5 ZN 3
    14 117060 TANK MNT RIGHT 1
    15 117059 TANK MNT LEFT 1
    16 713198 SEAL 3/8x3/4 SOLD BY FT 18.5"
    17 603807 CAP, 3.5" RATCHETING GAS 1
    18 606432 FUEL TANK 1
    19 000331 WIRE TIE, SMALL/SHORT 2
    20 604307 MOUNT, PUSH BUTTON 2
    21 033035 WEATHERSTRIP .12X.75 22"

    Weatherstrip lengths:

    A: 9.25"

    B: 5"

    C: 12"

    D: 13" vapor line from the vapor tee to the carbon canister

    Kohler Engine-36"/42" Mowers

    Item Part Number Description Qty Needed
    1 -- ENGINE, KOH KT725 1
    2 605793 MUFFLER 1
    3 016899 NT .375-16 FLKG5 1
    4 121625 CLUTCH ANCHOR 1
    5 767954 FW 0.379X.82X.06 HD ZN 1
    6 036244 CS .375-16X1.00 HX G5 ZN 1
    7 605814 SC0.375-16X1.250FLG 4
    8 712372 KEY 1/4 SQ X 0.66 LG(FS) 1
    9 605675 PULLEY, ENG 4.118 OP 1
    10 791251 HARNESS, CLUTCH PIGTAIL 1
    11 605595 BUSHING, CLUTCH 1
    12 605777K CLUTCH KIT, 605777 1
    13 602680 FW .453X1.12X.12 HRD ZN 1
    14 785048 CS .437-20X3.00 HXG5 P85 1
    15 029868 LW .250 INTEXT ZN 1
    16 768515 FW 0.281SAE 4
    17 603617 CS .250-20X.50 HX FL STP 1
    18 017038 LW .250 MED SPRING ZN 1
    19 024927 NT .250-20HXG5 3
    20 000331 WIRE TIE, SMALL/SHORT 2
    21 055939 CS .250-20X0.75 HX G5 ZN 2
    22 030817 STARTER SOLENOID HW KIT 1
    23 044255 NT #10-32HXG5 1
    24 605894 VAPOR LINE, 3/16 FORMED 1
    25 604966 TRIM LOCK, 1.13" 1
    26 000323 CLIP, HOSE CLAMP 2
    27 015818 FUEL LINE, 1/4" 18"
    28 604463 HOSE, OIL DRAIN 12"

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30 ft-lbs. Use only hand tools to install this fastener.

    4. Torque to 18 ft-lbs.

    5. Part of the wire harness.

    6. Part of the fuel system.

    Item Part Number Description Qty Needed
    1 -- ENGINE, KOHLER KT725 1
    2 604463 HOSE, OIL DRAIN 12"
    3 605793 MUFFLER 1
    4 016899 NT .375-16 FLKG5 1
    5 121625 CLUTCH ANCHOR 1
    6 767954 FW 0.379X.82X.06 HD ZN 1
    7 036244 CS .375-16X1.00 HX G5 ZN 1
    8 605814 SC0.375-16X1.250FLG 4
    9 712372 KEY 1/4 SQ X 0.66 LG(FS) 1
    10 605675 PULLEY, ENG 4.118 OP 1
    11 791251 HARNESS, CLUTCH PIGTAIL 1
    12 605595 BUSHING, CLUTCH 1
    13 605777K CLUTCH KIT, 605777 1
    14 602680 FW .453X1.12X.12 HRD ZN 1
    15 601834 CS .437-20X3.25 HXG5 P85 1
    16 029868 LW .250 INTEXT ZN 1
    17 768515 FW 0.281SAE 5
    18 603617 CS .250-20X.50 HX FL STP 1
    19 017038 LW .250 MED SPRING ZN 1
    20 024927 NT .250-20HXG5 3
    21 000331 WIRE TIE, SMALL/SHORT 2
    22 055939 CS .250-20X0.75 HX G5 ZN 2
    23 030817 STARTER SOLENOID HW KIT 1
    24 044255 NT #10-32HXG5 1
    25 605894 VAPOR LINE, 3/16 FORMED 1
    26 604966 TRIM LOCK, 1.13" 1
    27 000323 CLIP, HOSE CLAMP 2
    28 015818 FUEL LINE, 1/4" 18"

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30 ft-lbs. Use only hand tools to install this fastener.

    4. Torque to 18 ft-lbs.

    5. Part of the wire harness.

    6. Part of the fuel system.

    Item Part Number Description Qty Needed
    1 -- ENGINE, KOHLER KT725 1
    2 604463 HOSE, OIL DRAIN 12"
    3 605793 MUFFLER 1
    4 016899 NT .375-16 FLKG5 1
    5 121625 CLUTCH ANCHOR 1
    6 767954 FW 0.379X.82X.06 HD ZN 1
    7 036244 CS .375-16X1.00 HX G5 ZN 1
    8 605814 SC0.375-16X1.250FLG 4
    9 712372 KEY 1/4 SQ X 0.66 LG(FS) 1
    10 605675 PULLEY, ENG 4.118 OP 1
    11 791251 HARNESS, CLUTCH PIGTAIL 1
    12 605595 BUSHING, CLUTCH 1
    13 605777K CLUTCH KIT, 605777 1
    14 602680 FW .453X1.12X.12 HRD ZN 1
    15 601834 CS .437-20X3.25 HXG5 P85 1
    16 029868 LW .250 INTEXT ZN 1
    17 768515 FW 0.281SAE 5
    18 603617 CS .250-20X.50 HX FL STP 1
    19 017038 LW .250 MED SPRING ZN 1
    20 024927 NT .250-20HXG5 3
    21 000331 WIRE TIE, SMALL/SHORT 4
    22 055939 CS .250-20X0.75 HX G5 ZN 2
    23 030817 STARTER SOLENOID HW KIT 1
    24 044255 NT #10-32HXG5 1
    25 603326 VAPOR LINE, 3/16" 45"
    26 604966 TRIM LOCK, 1.13" 1
    27 000323 CLIP, HOSE CLAMP 2
    28 015818 FUEL LINE, 1/4" 18"

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30 ft-lbs. Use only hand tools to install this fastener.

    4. Torque to 18 ft-lbs.

    5. Part of the wire harness.

    6. Part of the fuel system.

    Item Part Number Description Qty Needed
    1 606432 FUEL TANK 1
    2 603807 CAP, 3.5" RATCHETING GAS 1
    3 117059 TANK MNT LEFT 1
    4 117060 TANK MNT RIGHT 1
    5 713198 SEAL 3/8x3/4 SOLD BY FT 18.5"
    6 055939 CS .250-20X0.75 HX G5 ZN 3
    7 768515 FW 0.281SAE 3
    8 604279 VAPOR LINE, 3/16 FORMED 1
    9 604322 1/4" HOSE BARB CROSS 1
    10 604273 VAPOR LINE, 3/16 FORMED 1
    11 604292 BOOT, 3/16" TO 1/4" BARB 1
    12 604323 VAPOR SYSTEM FILTER 1
    13 000331 WIRE TIE, SMALL/SHORT 2
    14 604307 MOUNT, PUSH BUTTON 2
    15 033035 WEATHERSTRIP .12X.75 22"
    16 601400 GM .63 x1.13 x.88 x .13 1

    1. 601400 is used on mowers S/N 15077829 & higher.

    WEATHERSTRIP & SEAL LENGTHS

    A: 9.25"

    B: 5"

    C: 12"

    Item Part Number Description Qty Needed
    1 604376 CARBON CANISTER, 4 GAL. 1
    2 000323 CLIP, HOSE CLAMP 2
    3 015818 FUEL LINE, 1/4" 13"
    4 603306 TEE, 1/4" PLASTIC 1
    5 604273 VAPOR LINE, 3/16 FORMED 1
    6 604279 VAPOR LINE, 3/16 FORMED 1
    7 055939 CS .250-20X0.75 HX G5 ZN 3
    8 768515 FW 0.281SAE 4
    9 117059 TANK MNT LEFT 1
    10 117060 TANK MNT RIGHT 1
    11 713198 SEAL 3/8x3/4 SOLD BY FT 18.5"
    12 603807 CAP, 3.5" RATCHETING GAS 1
    13 606432 FUEL TANK 1
    14 000331 WIRE TIE, SMALL/SHORT 2
    15 601400 GM .63 x1.13 x.88 x .13 1
    16 033035 WEATHERSTRIP .12X.75 22"
    17 604307 MOUNT, PUSH BUTTON 2
    18 603363 DECAL, ANSI COMPLIANCE 1
    19 601908 DECAL, SPARK ARRESTOR 1
    20 034280 CS .312-18X0.750HXG5 2
    21 768523 FW 0.343SAE 4
    22 034272 NT .312-18HXG5 2
    23 117463 CARBON CANISTER MOUNT 1
    24 024927 NT .250-20HXG5 1

    1. Part of the Fenders & Instrument Panel Assembly.

    SEAL & WEATHERSTRIP LENGTHS:

    A: 9.25"

    B: 5"

    C: 12"

    Item Part Number Description Qty Needed
    1 606475 AIR FILTER - MAIN 1
    2 606095 ENGINE OIL FILTER 1
    3 606020 VALVE, OIL DRAIN 3/8-18 1
    4 068478 FUEL FILTER - IN LINE 1

     

    Item Part Number Description Qty Needed
    1 605990 AIR FILTER - MAIN 1
    2 068478 FUEL FILTER - IN LINE 1
    3 606095 ENGINE OIL FILTER 1
    4 606020 VALVE, OIL DRAIN 3/8-18 1

    1. Used on model numbers 934521US, 934539US, 934562US, 934570, 934588, 934596, 934604 & 934612.

    Kohler Engine-48"/54"/60" Mowers

    Item Part Number Description Qty Needed
    1 -- ENGINE, KOH KT740 1
    Not Shown -- ENGINE, KOH KT740 HDAC 1
    Not Shown -- ENGINE, KOH KT745 HDAC 1
    2 604463 HOSE, OIL DRAIN 12"
    3 605793 MUFFLER 1
    4 016899 NT .375-16 FLKG5 1
    5 121625 CLUTCH ANCHOR 1
    6 767954 FW 0.379X.82X.06 HD ZN 1
    7 036244 CS .375-16X1.00 HX G5 ZN 1
    8 605814 SC0.375-16X1.250FLG 4
    9 605675 PULLEY, ENG 4.118 OP 1
    10 712372 KEY 1/4 SQ X 0.66 LG(FS) 1
    11 605595 BUSHING, CLUTCH 1
    12 791251 HARNESS, CLUTCH PIGTAIL 1
    13 605777K CLUTCH KIT, 605777 1
    14 602680 FW .453X1.12X.12 HRD ZN 1
    15 601834 CS .437-20X3.25 HXG5 P85 1
    16 029868 LW .250 INTEXT ZN 1
    17 768515 FW 0.281SAE 5
    18 603617 CS .250-20X.50 HX FL STP 1
    19 024927 NT .250-20HXG5 3
    20 017038 LW .250 MED SPRING ZN 1
    21 055939 CS .250-20X0.75 HX G5 ZN 2
    22 030817 STARTER SOLENOID HW KIT 1
    23 044255 NT #10-32HXG5 1
    24 605894 VAPOR LINE, 3/16 FORMED 1
    25 604966 TRIM LOCK, 1.13" 1
    26 000331 WIRE TIE, SMALL/SHORT 2
    27 000323 CLIP, HOSE CLAMP 2
    28 015818 FUEL LINE, 1/4" 18"

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30 ft-lbs. Use only hand tools to install this fastener.

    4. Torque to 18 ft-lbs.

    5. Part of the wire harness.

    6. Part of the fuel system

    Item Part Number Description Qty Needed
    1 -- ENGINE, KOH KT745 1
    2 604463 HOSE, OIL DRAIN 12"
    3 605793 MUFFLER 1
    4 016899 NT .375-16 FLKG5 1
    5 121625 CLUTCH ANCHOR 1
    6 767954 FW 0.379X.82X.06 HD ZN 1
    7 036244 CS .375-16X1.00 HX G5 ZN 1
    8 605814 SC0.375-16X1.250FLG 4
    9 712372 KEY 1/4 SQ X 0.66 LG(FS) 1
    10 605675 PULLEY, ENG 4.118 OP 1
    11 791251 HARNESS, CLUTCH PIGTAIL 1
    12 605595 BUSHING, CLUTCH 1
    13 605777K CLUTCH KIT, 605777 1
    14 602680 FW .453X1.12X.12 HRD ZN 1
    15 601834 CS .437-20X3.25 HXG5 P85 1
    16 029868 LW .250 INTEXT ZN 1
    17 768515 FW 0.281SAE 5
    18 603617 CS .250-20X.50 HX FL STP 1
    19 017038 LW .250 MED SPRING ZN 1
    20 024927 NT .250-20HXG5 3
    21 000331 WIRE TIE, SMALL/SHORT 4
    22 055939 CS .250-20X0.75 HX G5 ZN 2
    23 030817 STARTER SOLENOID HW KIT 1
    24 044255 NT #10-32HXG5 1
    25 604966 TRIM LOCK, 1.13" 1
    26 603326 VAPOR LINE, 3/16" 45"
    27 000323 CLIP, HOSE CLAMP 2
    28 015818 FUEL LINE, 1/4" 18"

    1. Supplied with the engine.

    2. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 30 ft-lbs. Use only hand tools to install this fastener.

    4. Torque to 18 ft-lbs.

    5. Part of the wire harness.

    6. Part of the fuel system.

    Item Part Number Description Qty Needed
    1 606432 FUEL TANK 1
    2 603807 CAP, 3.5" RATCHETING GAS 1
    3 117059 TANK MNT LEFT 1
    4 117060 TANK MNT RIGHT 1
    5 713198 SEAL 3/8x3/4 SOLD BY FT 18.5"
    6 055939 CS .250-20X0.75 HX G5 ZN 3
    7 768515 FW 0.281SAE 3
    8 604279 VAPOR LINE, 3/16 FORMED 1
    9 604322 1/4" HOSE BARB CROSS 1
    10 604273 VAPOR LINE, 3/16 FORMED 1
    11 604292 BOOT, 3/16" TO 1/4" BARB 1
    12 604323 VAPOR SYSTEM FILTER 1
    13 000331 WIRE TIE, SMALL/SHORT 2
    14 604307 MOUNT, PUSH BUTTON 2
    15 033035 WEATHERSTRIP .12X.75 22"
    16 601400 GM .63 x1.13 x.88 x .13 1

    1. 601400 is used on mowers S/N 15077829 & higher.

    WEATHERSTRIP & SEAL LENGTHS

    A: 9.25"

    B: 5"

    C: 12"

    Item Part Number Description Qty Needed
    1 604376 CARBON CANISTER, 4 GAL 1
    2 000323 CLIP, HOSE CLAMP 2
    3 015818 FUEL LINE, 1/4" 13"
    4 603306 TEE, 1/4" PLASTIC 1
    5 604273 VAPOR LINE, 3/16 FORMED 1
    6 604279 VAPOR LINE, 3/16 FORMED 1
    7 055939 CS .250-20X0.75 HX G5 ZN 3
    8 768515 FW 0.281SAE 4
    9 117059 TANK MNT LEFT 1
    10 117060 TANK MNT RIGHT 1
    11 713198 SEAL 3/8x3/4 SOLD BY FT 18.5"
    12 603807 CAP, 3.5" RATCHETING GAS 1
    13 606432 FUEL TANK 1
    14 000331 WIRE TIE, SMALL/SHORT 2
    15 601400 GM .63 x1.13 x.88 x .13 1
    16 033035 WEATHERSTRIP .12X.75 22"
    17 604307 MOUNT, PUSH BUTTON 2
    18 603363 DECAL, ANSI COMPLIANCE 1
    19 601908 DECAL, SPARK ARRESTOR 1
    20 034280 CS .312-18X0.750HXG5 2
    21 768523 FW 0.343SAE 4
    22 034272 NT .312-18HXG5 2
    23 117463 CARBON CANISTER MOUNT 1
    24 024927 NT .250-20HXG5 1

    1. Part of the Fenders & Instrument Panel Assembly.

    SEAL & WEATHERSTRIP LENGTHS:

    A: 9.25"

    B: 5"

    C: 12"

    Item Part Number Description Qty Needed
    1 606475 AIR FILTER - MAIN 1
    2 606095 ENGINE OIL FILTER 1
    3 606020 VALVE, OIL DRAIN 3/8-18 1
    4 068478 FUEL FILTER - IN LINE 1

     

    Item Part Number Description Qty Needed
    1 605990 AIR FILTER - MAIN 1
    2 068478 FUEL FILTER - IN LINE 1
    3 606095 ENGINE OIL FILTER 1
    4 606020 VALVE, OIL DRAIN 3/8-18 1

    1. Used on model numbers 934521US, 934539US, 934562US, 934570, 934588, 934596, 934604 & 934612.

    Section 5: Deck, Deck Belt, Blades & Deck Lift

    36" Deck

    Item Part Number Description Qty Needed
    1 553371 36" SERVICE DECK 1
    2 604221 DECAL, DANGER / CHUTE 1
    3 793513 DECAL, 36" DECK ID 1
    4 604222 DECAL, DANGER / OBJECTS 1

    1. The deck includes decals.

    Item Part Number Description Qty Needed
    1 122027 PULLER 1
    2 074252 CS .500-13X1.50 HX G5 ZN 2
    3 606250 PIVOT SPACER BUSHING 2
    4 781567 NT .500-13NLG5 4
    5 607616 SPRING, DECK IDLER 1
    6 767962 FW .531 x 1.063 x .175 2
    7 605512 4" IDLER PULLEY 1
    8 086660 NT .375-16NLG8 1
    9 712893 FW 0.406X1.25X.12 HD ZN 2
    10 119936 IDLER ARM, PIVOTING 36" 1
    11 601839 PIVOT SPACER BUSHING 1
    12 117539 SPACER, IDLER ARM 1
    13 604253 CB .50-13 X 2.00 STD ZN 1
    14 604251 NT .312-18 HXNL JAM G2ZN 2
    15 122398 TENSIONING PULLEY STOP 1
    16 768523 FW 0.343SAE 1
    17 705954 CS .500-13X1.25 HX G5 ZN 2
    18 798603 FW .515X1.65X.12 HD ZN 2
    19 604777 SPINDLE SPACER 2
    20 605860 PULLEY, A-SEC 2
    21 604661 SPACER, SPINDLE PULLEY 2
    22 054502 NT .375-16HXG5 8
    23 767954 FW 0.379X.82X.06 HD ZN 16
    24 005116 CS .375-16X1.38 HX G5 ZN 8
    25 607418 BLADE SPINDLE ASSY 2
    26 126123 SVC KIT 604219 PULLEY 1
    27 604254 CB .50-13 X 2.50 STD ZN 1
    28 037887 CB .312-18X 1.000 FUL ZN 1
    29 080655 CS .375-16X1.500HXG5 1
    30 083147 CB .312-18X .620 G5 ZN 1

    1. Torque to 99 N•m.

    2. Torque to 41 N•m.

    Item Part Number Description Qty Needed
    -- 607418 BLADE SPINDLE ASSY 1
    1 783548 RING, BLADE SPINDLE RET 1
    2 601827 BEARING, 6205 2RST C3 2
    3 601830 SPACER, BLADE SPINDLE 1
    4 601828 HOUSING, BLADE SPINDLE 1
    5 601829 SHAFT, BLADE SPINDLE 1

     

    Item Part Number Description Qty Needed
    1 605254 PULLEY COVER 1
    2 604324 CS .250-20 X .75 HX FLG 4
    3 604403 PULLEY COVER 1
    4 603806 DECK BELT 1
    5 604609 RSD DISCHARGE CHUTE 1
    6 086660 NT .375-16NLG8 1
    7 604331 CHUTE SPRING 1
    8 604346 PIN, DISCHARGE CHUTE 1
    9 781567 NT .500-13NLG5 1
    10 767962 FW .531 x 1.063 x .175 3
    11 788166 WHEEL ASSY, ANTI SCALP 1
    12 783753 BLADE,17.86"-L-F-CW 2
    Not Shown 603995 BLADE, 17.86" -M-F-CW 2
    Not Shown 787721 BLADE,17.86"-H-F-CW 2
    Not Shown 603848 BLADE, 17.86"-CAT-F-CW 2
    Not Shown 794198 BLADE,17.86"-MUL-F-CW 2
    Not Shown 785436 BLADE,17.86"-GAT-F-CW 2
    13 782474 CW .678 X 2.250 X .187 2
    14 781872 CS .625-11X1.250HXG5 2
    15 781708 CS .500-13X4.25 HX G5 ZN 1
    16 031997 ANTI-SCALP WHEEL 1
    17 053199 NT .500-13JAMG5 1

    1. Torque to 118 ft-lbs.

    2. Torque to 2–5 ft-lbs on these self-tapping screws.

    3. Do not torque; the discharge chute must pivot freely.

    4. Plastic wheel assembly (788166) includes hardware.

    Item Part Number Description Qty Needed
    1 118020 PIN, INDICATOR 1
    2 054502 NT .375-16HXG5 2
    3 767954 FW 0.379X.82X.06 HD ZN 8
    4 118085 DECK LIFT W/A, REAR 1
    5 601839 PIVOT SPACER BUSHING 2
    6 118016 LIFT PEDAL, LINK 1
    7 005132 CS .375-16X1.12 HX G5 Z 1
    8 016899 NT .375-16 FLKG5 8
    9 116151 PIVOT BLOCK, DECK LIFT 4
    10 029629 CS .375-16X0.75 HXF G5ZN 8
    11 086660 NT .375-16NLG8 4
    12 605114 FW .41X.94X.25 UHMW 4
    13 791673 CLIP E,.625x.480x.042 Z 8
    14 118018 PIVOT, DECK LIFT 4
    15 604579 LINK, DECK LIFT 4
    16 604803 CE .375 x 2.00 W/BALE 4
    17 036244 CS .375-16X1.00 HX G5 ZN 1
    18 118084 DECK LIFT W/A, FRONT 1
    19 074252 CS .500-13X1.50 HX G5 ZN 2
    20 606250 PIVOT SPACER BUSHING 2
    21 781567 NT .500-13NLG5 2

     

    42" Deck

    Item Part Number Description Qty Needed
    1 553369 42" SERVICE DECK 1
    2 604221 DECAL, DANGER / CHUTE 1
    3 793521 DECAL, 42" DECK ID 1
    4 604222 DECAL, DANGER / OBJECTS 1

    1. The deck includes decals.

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 4
    2 767962 FW .531 x 1.063 x .175 2
    3 605512 4" IDLER PULLEY 1
    4 086660 NT .375-16NLG8 1
    5 712893 FW 0.406X1.25X.12 HD ZN 2
    6 117512 IDLER ARM, PIVOTING 1
    7 607616 SPRING, DECK IDLER 1
    8 601839 PIVOT SPACER BUSHING 1
    9 117539 SPACER, IDLER ARM 1
    10 603846 NT .375-16 HX NL JAM ZN 1
    11 122398 TENSIONING PULLEY STOP 1
    12 604253 CB .50-13 X 2.00 STD ZN 1
    13 126123 SVC KIT 604219 PULLEY 1
    14 705954 CS .500-13X1.25 HX G5 ZN 2
    15 798603 FW .515X1.65X.12 HD ZN 2
    16 604661 SPACER, SPINDLE PULLEY 4
    17 604704 PULLEY, DECK DRIVE B-SEC 2
    18 054502 NT .375-16HXG5 8
    19 767954 FW 0.379X.82X.06 HD ZN 16
    20 005116 CS .375-16X1.38 HX G5 ZN 8
    21 604254 CB .50-13 X 2.50 STD ZN 1
    22 607418 BLADE SPINDLE ASSY 2
    23 080655 CS .375-16X1.500HXG5 1
    24 025395 CB .375-16X 1.00 G5 ZN 1
    25 122027 PULLER 1
    26 074252 CS .500-13X1.50 HX G5 ZN 2
    27 606250 PIVOT SPACER BUSHING 2
    28 604251 NT .312-18 HXNL JAM G2ZN 1
    29 768523 FW 0.343SAE 1
    30 083147 CB .312-18X .620 G5 ZN 1

    1. Torque to 99 N•m.

    2. Torque to 41 N•m.

    Item Part Number Description Qty Needed
    -- 607418 BLADE SPINDLE ASSY 1
    1 783548 RING, BLADE SPINDLE RET 1
    2 601827 BEARING, 6205 2RST C3 2
    3 601830 SPACER, BLADE SPINDLE 1
    4 601828 HOUSING, BLADE SPINDLE 1
    5 601829 SHAFT, BLADE SPINDLE 1

     

    Item Part Number Description Qty Needed
    1 605452 PULLEY COVER 2
    2 604324 CS .250-20 X .75 HX FLG 2
    3 606016 DECK BELT 1
    4 604609 RSD DISCHARGE CHUTE 1
    5 086660 NT .375-16NLG8 1
    6 604331 CHUTE SPRING 1
    7 604346 PIN, DISCHARGE CHUTE 1
    8 781567 NT .500-13NLG5 1
    9 767962 FW .531 x 1.063 x .175 3
    10 788166 WHEEL ASSY, ANTI SCALP 1
    11 793794 BLADE,20.50"-L-F-CW 2
    Not Shown 794685 BLADE, F20.50"-H-F-CW 2
    Not Shown 793935 BLADE,20.50"-CAT-F-CW 2
    Not Shown 794214 BLADE,20.50"-MUL-F-CW 2
    Not Shown 794230 BLADE,20.50"GAT-F-CW 2
    12 782474 CW .678 X 2.250 X .187 2
    13 781872 CS .625-11X1.250HXG5 2
    14 781708 CS .500-13X4.25 HX G5 ZN 1
    15 031997 ANTI-SCALP WHEEL 1
    16 053199 NT .500-13JAMG5 1

    1. Torque to 118 ft-lbs.

    2. Torque to 2–5 ft-lbs on these 2 self-tapping screws.

    3. Do not torque; the discharge chute must pivot freely.

    4. Plastic wheel assembly (788166) includes hardware

    Item Part Number Description Qty Needed
    1 118020 PIN, INDICATOR 1
    2 054502 NT .375-16HXG5 2
    3 767954 FW 0.379X.82X.06 HD ZN 8
    4 118085 DECK LIFT W/A, REAR 1
    5 601839 PIVOT SPACER BUSHING 2
    6 118016 LIFT PEDAL, LINK 1
    7 005132 CS .375-16X1.12 HX G5 Z 1
    8 016899 NT .375-16 FLKG5 8
    9 116151 PIVOT BLOCK, DECK LIFT 4
    10 029629 CS .375-16X0.75 HXF G5ZN 8
    11 086660 NT .375-16NLG8 4
    12 605114 FW .41X.94X.25 UHMW 4
    13 791673 CLIP E,.625x.480x.042 Z 8
    14 118018 PIVOT, DECK LIFT 4
    15 604579 LINK, DECK LIFT 4
    16 604803 CE .375 x 2.00 W/BALE 4
    17 036244 CS .375-16X1.00 HX G5 ZN 1
    18 118084 DECK LIFT W/A, FRONT 1
    19 074252 CS .500-13X1.50 HX G5 ZN 2
    20 606250 PIVOT SPACER BUSHING 2
    21 781567 NT .500-13NLG5 2

     

    48" Deck

    Item Part Number Description Qty Needed
    1 552267 48" SERVICE DECK 1
    2 601624 DECAL, DISCHARGE CHUTE 1
    3 601837 DECAL, DECK DANGERS 1
    4 793976 DECAL,48"DECK ID 1
    5 604222 DECAL, DANGER / OBJECTS 1

    1. The deck includes decals.

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 3
    2 767962 FW .531 x 1.063 x .175 3
    3 605512 4" IDLER PULLEY 1
    4 604251 NT .312-18 HXNL JAM G2ZN 4
    5 604252 FW .340X.68X.04 ZN 4
    6 604110 ANCHOR, SPRING TENSIONER 2
    7 607616 SPRING, DECK IDLER 1
    8 604194 SLED, IDLER 1
    9 604079 IDLER SLIDE, EXTRUDED 2
    10 604253 CB .50-13 X 2.00 STD ZN 1
    11 705954 CS .500-13X1.25 HX G5 ZN 3
    12 798603 FW .515X1.65X.12 HD ZN 3
    13 604661 SPACER, SPINDLE PULLEY 6
    14 604665 PULLEY, DECK DRIVE B-SEC 3
    15 054502 NT .375-16HXG5 12
    16 767954 FW 0.379X.82X.06 HD ZN 24
    17 126124 SVC KIT 604231 PULLEY 1
    18 126123 SVC KIT 604219 PULLEY 1
    19 607418 BLADE SPINDLE ASSY 3
    20 005116 CS .375-16X1.38 HX G5 ZN 12
    21 604254 CB .50-13 X 2.50 STD ZN 2
    22 083147 CB .312-18X .620 G5 ZN 4

    1. Torque to 73 ft-lbs.

    2. Torque to 30 ft-lbs

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 3
    2 767962 FW .531 x 1.063 x .175 3
    3 605512 4" IDLER PULLEY 1
    4 604251 NT .312-18 HXNL JAM G2ZN 5
    5 604252 FW .340X.68X.04 ZN 4
    6 604110 ANCHOR, SPRING TENSIONER 2
    7 607616 SPRING, DECK IDLER 1
    8 604194 SLED, IDLER 1
    9 604079 IDLER SLIDE, EXTRUDED 2
    10 604253 CB .50-13 X 2.00 STD ZN 1
    11 705954 CS .500-13X1.25 HX G5 ZN 3
    12 798603 FW .515X1.65X.12 HD ZN 3
    13 604661 SPACER, SPINDLE PULLEY 6
    14 604665 PULLEY, DECK DRIVE B-SEC 3
    15 054502 NT .375-16HXG5 12
    16 767954 FW 0.379X.82X.06 HD ZN 24
    17 126124 SVC KIT 604231 PULLEY 1
    18 126123 SVC KIT 604219 PULLEY 1
    19 607418 BLADE SPINDLE ASSY 3
    20 005116 CS .375-16X1.38 HX G5 ZN 12
    21 604254 CB .50-13 X 2.50 STD ZN 1
    22 083147 CB .312-18X .620 G5 ZN 5
    23 344267 FW .510X2.15X.19 ZN 1
    24 721910 CS .500-13X2.750HXG5 1
    25 017129 FW .440X1.00X0.08 ZN 1

    1. Torque to 73 ft-lbs.

    2. Torque to 30 ft-lbs.

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 3
    2 121780 BELT GUIDE 1
    3 767962 FW .531 x 1.063 x .175 3
    4 605512 4" IDLER PULLEY 1
    5 604251 NT .312-18 HXNL JAM G2ZN 5
    6 604252 FW .340X.68X.04 ZN 4
    7 604110 ANCHOR, SPRING TENSIONER 2
    8 607616 SPRING, DECK IDLER 1
    9 604194 SLED, IDLER 1
    10 604079 IDLER SLIDE, EXTRUDED 2
    11 604253 CB .50-13 X 2.00 STD ZN 1
    12 705954 CS .500-13X1.25 HX G5 ZN 3
    13 798603 FW .515X1.65X.12 HD ZN 3
    14 604661 SPACER, SPINDLE PULLEY 6
    15 604665 PULLEY, DECK DRIVE B-SEC 3
    16 054502 NT .375-16HXG5 12
    17 767954 FW 0.379X.82X.06 HD ZN 24
    18 126124 SVC KIT 604231 PULLEY 1
    19 126123 SVC KIT 604219 PULLEY 1
    20 607418 BLADE SPINDLE ASSY 3
    21 005116 CS .375-16X1.38 HX G5 ZN 12
    22 083147 CB .312-18X .620 G5 ZN 5
    23 605516 FW .531 x 2.25 x .25 ZN 2
    24 721910 CS .500-13X2.750HXG5 2
    25 017129 FW .440X1.00X0.08 ZN 1

    1. Torque to 73 ft-lbs.

    2. Torque to 30 ft-lbs.

    Item Part Number Description Qty Needed
    -- 607418 BLADE SPINDLE ASSY 1
    1 783548 RING, BLADE SPINDLE RET 1
    2 601827 BEARING, 6205 2RST C3 2
    3 601830 SPACER, BLADE SPINDLE 1
    4 601828 HOUSING, BLADE SPINDLE 1
    5 601829 SHAFT, BLADE SPINDLE 1

     

    Item Part Number Description Qty Needed
    1 122667 PULLEY COVER SVC KIT 1
    2 604324 CS .250-20 X .75 HX FLG 4
    3 604830 DECK BELT 1
    4 604609 RSD DISCHARGE CHUTE 1
    5 604346 PIN, DISCHARGE CHUTE 1
    6 604331 CHUTE SPRING 1
    7 086660 NT .375-16NLG8 1
    8 604658 PIN, PULLER 2
    9 117877 PULLER, RS 1
    10 117878 PULLER, LS 1
    11 781567 NT .500-13NLG5 3
    12 767962 FW .531 x 1.063 x .175 5
    13 788166 WHEEL ASSY, ANTI SCALP 3
    14 601123 BLADE, 16.50"-L-F-CW 3
    Not Shown 601014 BLADE, F16.50"-L-F-CW 3
    Not Shown 795757 BLADE, F16.50"-H-F-CW 3
    Not Shown 796623 BLADE, 16.50"-MUL-F-CW 3
    Not Shown 796631 BLADE, 16.50"-GAT-F-CW 3
    Not Shown 796649 BLADE, 16.50"-CAT-F-CW 3
    15 782474 CW .678 X 2.250 X .187 3
    16 781872 CS .625-11X1.250HXG5 3
    17 017301 HP .125 X2.375 ZN 2
    18 781708 CS .500-13X4.25 HX G5 ZN 1
    19 031997 ANTI-SCALP WHEEL 1
    20 053199 NT .500-13JAMG5 1

    1. Torque to 118 ft-lbs.

    2. Torque to 2–5 ft-lbs on these 4 self-tapping screws.

    3. Do not torque; the discharge chute must pivot freely.

    4. Mowers with serial numbers prior to 15091572 require kit 122667, which includes drill templates and (1) pulley cover 605867.

    Item Part Number Description Qty Needed
    1 118020 PIN, INDICATOR 1
    2 016899 NT .375-16 FLKG5 8
    3 118085 DECK LIFT W/A, REAR 1
    4 054502 NT .375-16HXG5 2
    5 767954 FW 0.379X.82X.06 HD ZN 8
    6 601839 PIVOT SPACER BUSHING 2
    7 118016 LIFT PEDAL, LINK 1
    8 005132 CS .375-16X1.12 HX G5 Z 1
    9 086660 NT .375-16NLG8 4
    10 605114 FW .41X.94X.25 UHMW 4
    11 791673 CLIP E,.625x.480x.042 Z 8
    12 118018 PIVOT, DECK LIFT 4
    13 604579 LINK, DECK LIFT 4
    14 604803 CE .375 x 2.00 W/BALE 4
    15 116151 PIVOT BLOCK, DECK LIFT 4
    16 029629 CS .375-16X0.75 HXF G5ZN 8
    17 036244 CS .375-16X1.00 HX G5 ZN 1
    18 118084 DECK LIFT W/A, FRONT 1
    19 604656 PIVOT SPACER BUSHING 2
    20 767962 FW .531 x 1.063 x .175 4
    21 781567 NT .500-13NLG5 2
    22 074252 CS .500-13X1.50 HX G5 ZN 2

     

    Item Part Number Description Qty Needed
    1 118020 PIN, INDICATOR 1
    2 016899 NT .375-16 FLKG5 8
    3 118085 DECK LIFT W/A, REAR 1
    4 054502 NT .375-16HXG5 2
    5 767954 FW 0.379X.82X.06 HD ZN 8
    6 601839 PIVOT SPACER BUSHING 2
    7 118016 LIFT PEDAL, LINK 1
    8 005132 CS .375-16X1.12 HX G5 Z 1
    9 086660 NT .375-16NLG8 4
    10 605114 FW .41X.94X.25 UHMW 4
    11 791673 CLIP E,.625x.480x.042 Z 8
    12 118018 PIVOT, DECK LIFT 4
    13 604579 LINK, DECK LIFT 4
    14 604803 CE .375 x 2.00 W/BALE 4
    15 116151 PIVOT BLOCK, DECK LIFT 4
    16 029629 CS .375-16X0.75 HXF G5ZN 8
    17 036244 CS .375-16X1.00 HX G5 ZN 1
    18 118084 DECK LIFT W/A, FRONT 1
    19 604656 PIVOT SPACER BUSHING 2
    20 767962 FW .531 x 1.063 x .175 4
    21 781567 NT .500-13NLG5 2
    22 074252 CS .500-13X1.50 HX G5 ZN 2

     

    54" Deck

    Item Part Number Description Qty Needed
    1 552268 54" SERVICE DECK 1
    2 604221 DECAL, DANGER / CHUTE 1
    3 799171 DECAL, Z 54" Deck ID 1
    4 604222 DECAL, DANGER / OBJECTS 1

    1. The deck includes decals.

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 3
    2 767962 FW .531 x 1.063 x .175 3
    3 604792 IDLER PULLEY, 5.00" 1
    4 604251 NT .312-18 HXNL JAM G2ZN 8
    5 604252 FW .340X.68X.04 ZN 6
    6 604110 ANCHOR, SPRING TENSIONER 2
    7 607616 SPRING, DECK IDLER 1
    8 604791 SLED, IDLER 1
    9 604790 IDLER SLIDE, EXTRUDED 2
    10 604253 CB .50-13 X 2.00 STD ZN 1
    11 705954 CS .500-13X1.25 HX G5 ZN 3
    12 798603 FW .515X1.65X.12 HD ZN 3
    13 604661 SPACER, SPINDLE PULLEY 6
    14 604664 PULLEY, DECK DRIVE B-SEC 3
    15 054502 NT .375-16HXG5 12
    16 767954 FW 0.379X.82X.06 HD ZN 24
    17 126124 SVC KIT 604231 PULLEY 2
    18 005116 CS .375-16X1.38 HX G5 ZN 12
    19 607418 BLADE SPINDLE ASSY 3
    20 604254 CB .50-13 X 2.50 STD ZN 1
    21 083147 CB .312-18X .620 G5 ZN 8
    22 768523 FW 0.343SAE 2

    1. Torque to 73 ft-lbs.

    2. Torque to 30 ft-lbs.

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 3
    2 767962 FW .531 x 1.063 x .175 3
    3 604792 IDLER PULLEY, 5.00" 1
    4 604251 NT .312-18 HXNL JAM G2ZN 8
    5 604252 FW .340X.68X.04 ZN 6
    6 604110 ANCHOR, SPRING TENSIONER 2
    7 607616 SPRING, DECK IDLER 1
    8 604791 SLED, IDLER 1
    9 604790 IDLER SLIDE, EXTRUDED 2
    10 604253 CB .50-13 X 2.00 STD ZN 1
    11 705954 CS .500-13X1.25 HX G5 ZN 3
    12 798603 FW .515X1.65X.12 HD ZN 3
    13 604661 SPACER, SPINDLE PULLEY 6
    14 604664 PULLEY, DECK DRIVE B-SEC 3
    15 054502 NT .375-16HXG5 12
    16 767954 FW 0.379X.82X.06 HD ZN 24
    17 126124 SVC KIT 604231 PULLEY 2
    18 005116 CS .375-16X1.38 HX G5 ZN 12
    19 607418 BLADE SPINDLE ASSY 3
    20 604254 CB .50-13 X 2.50 STD ZN 1
    21 083147 CB .312-18X .620 G5 ZN 8
    22 017129 FW .440X1.00X0.08 ZN 2
    23 344267 FW .510X2.15X.19 ZN 1
    24 721910 CS .500-13X2.750HXG5 1

    1. Torque to 73 ft-lbs.

    2. Torque to 30 ft-lbs.

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 3
    2 121780 BELT GUIDE 1
    3 767962 FW .531 x 1.063 x .175 3
    4 604792 IDLER PULLEY, 5.00" 1
    5 604251 NT .312-18 HXNL JAM G2ZN 8
    6 604252 FW .340X.68X.04 ZN 6
    7 604110 ANCHOR, SPRING TENSIONER 2
    8 607616 SPRING, DECK IDLER 1
    9 604791 SLED, IDLER 1
    10 604790 IDLER SLIDE, EXTRUDED 2
    11 604253 CB .50-13 X 2.00 STD ZN 1
    12 705954 CS .500-13X1.25 HX G5 ZN 3
    13 798603 FW .515X1.65X.12 HD ZN 3
    14 604661 SPACER, SPINDLE PULLEY 6
    15 604664 PULLEY, DECK DRIVE B-SEC 3
    16 054502 NT .375-16HXG5 12
    17 767954 FW 0.379X.82X.06 HD ZN 24
    18 126124 SVC KIT 604231 PULLEY 2
    19 005116 CS .375-16X1.38 HX G5 ZN 12
    20 607418 BLADE SPINDLE ASSY 3
    21 083147 CB .312-18X .620 G5 ZN 8
    22 017129 FW .440X1.00X0.08 ZN 2
    23 605516 FW .531 x 2.25 x .25 ZN 2
    24 721910 CS .500-13X2.750HXG5 2

    1. Torque to 73 ft-lbs.

    2. Torque to 30 ft-lbs

    Item Part Number Description Qty Needed
    1 604722 PULLEY COVER, RIGHT SIDE 1
    2 604324 CS .250-20 X .75 HX FLG 4
    3 604817 DECK BELT 1
    4 604723 PULLEY COVER, LEFT SIDE 1
    5 604609 RSD DISCHARGE CHUTE 1
    6 604346 PIN, DISCHARGE CHUTE 1
    7 604331 CHUTE SPRING 1
    8 086660 NT .375-16NLG8 1
    9 604658 PIN, PULLER 2
    10 117877 PULLER, RS 1
    11 117878 PULLER, LS 1
    12 781567 NT .500-13NLG5 3
    13 767962 FW .531 x 1.063 x .175 5
    14 788166 WHEEL ASSY, ANTI SCALP 3
    15 601124 BLADE, 18.50"-L-F-CW 3
    Not Shown 601012 BLADE F18.50"-L-F-CW 3
    Not Shown 797696 BLADE, F18.50"-H-F-CW 3
    Not Shown 797704 BLADE, 18.50"-MUL-F-CW 3
    Not Shown 797712 BLADE, 18.50"-GAT-F-CW 3
    16 782474 CW .678 X 2.250 X .187 3
    17 781872 CS .625-11X1.250HXG5 3
    18 017301 HP .125 X2.375 ZN 2
    19 781708 CS .500-13X4.25 HX G5 ZN 1
    20 031997 ANTI-SCALP WHEEL 1
    21 053199 NT .500-13JAMG5 1

    1. Torque to 118 ft-lbs.

    2. Torque to 2–5 ft-lbs on these 4 self-tapping screws.

    3. Do not torque; the discharge chute must pivot freely.

    Item Part Number Description Qty Needed
    1 553913 54" SERVICE DECK 1
    2 799171 DECAL, Z 54" Deck ID 1
    3 604222 DECAL, DANGER / OBJECTS 1
    4 604221 DECAL, DANGER / CHUTE 1

     

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 3
    2 121780 BELT GUIDE 1
    3 767962 FW .531 x 1.063 x .175 3
    4 604792 IDLER PULLEY, 5.00" 1
    5 604791 SLED, IDLER 1
    6 604110 ANCHOR, SPRING TENSIONER 2
    7 607616 SPRING, DECK IDLER 1
    8 604790 IDLER SLIDE, EXTRUDED 2
    9 604251 NT .312-18 HXNL JAM G2ZN 8
    10 604252 FW .340X.68X.04 ZN 6
    11 604253 CB .50-13 X 2.00 STD ZN 1
    12 705954 CS .500-13X1.25 HX G5 ZN 3
    13 798603 FW .515X1.65X.12 HD ZN 3
    14 604661 SPACER, SPINDLE PULLEY 6
    15 604664 PULLEY, DECK DRIVE B-SEC 3
    16 054502 NT .375-16HXG5 12
    17 767954 FW 0.379X.82X.06 HD ZN 24
    18 126124 SVC KIT 604231 PULLEY 2
    19 017129 FW .440X1.00X0.08 ZN 2
    20 083147 CB .312-18X .620 G5 ZN 8
    21 605516 FW .531 x 2.25 x .25 ZN 2
    22 721910 CS .500-13X2.750HXG5 2
    23 607418 BLADE SPINDLE ASSY 3
    24 005116 CS .375-16X1.38 HX G5 ZN 12

     

    Item Part Number Description Qty Needed
    1 604722 PULLEY COVER, RIGHT SIDE 1
    2 604324 CS .250-20 X .75 HX FLG 4
    3 604723 PULLEY COVER, LEFT SIDE 1
    4 604817 DECK BELT 1
    5 604609 RSD DISCHARGE CHUTE 1
    6 025395 CB .375-16X 1.00 G5 ZN 2
    7 123349 DISCHARGE ADAPTER KIT 1
    8 086660 NT .375-16NLG8 3
    9 767954 FW 0.379X.82X.06 HD ZN 2
    10 016899 NT .375-16 FLKG5 1
    11 604331 CHUTE SPRING 1
    12 604346 PIN, DISCHARGE CHUTE 1
    13 011320 CB .375-16X .750 STD ZN 1
    14 604658 PIN, PULLER 2
    15 117877 PULLER, RS 1
    16 017301 HP .125 X2.375 ZN 2
    17 117878 PULLER, LS 1
    18 781567 NT .500-13NLG5 3
    19 767962 FW .531 x 1.063 x .175 9
    20 788166 WHEEL ASSY, ANTI SCALP 3
    21 601124 BLADE, 18.50"-L-F-CW 3
    Not Shown 601012 BLADE F18.50"-L-F-CW 3
    Not Shown 797696 BLADE, F18.50"-H-F-CW 3
    Not Shown 797704 BLADE, 18.50"-MUL-F-CW 3
    Not Shown 797712 BLADE, 18.50"-GAT-F-CW 3
    22 782474 CW .678 X 2.250 X .187 3
    23 781872 CS .625-11X1.250HXG5 3
    24 781708 CS .500-13X4.25 HX G5 ZN 1
    25 031997 ANTI-SCALP WHEEL 1
    26 053199 NT .500-13JAMG5 1

     

    Item Part Number Description Qty Needed
    1 604722 PULLEY COVER, RIGHT SIDE 1
    2 604324 CS .250-20 X .75 HX FLG 4
    3 604723 PULLEY COVER, LEFT SIDE 1
    4 604817 DECK BELT 1
    5 604609 RSD DISCHARGE CHUTE 1
    6 011320 CB .375-16X .750 STD ZN 3
    7 123349 DISCHARGE ADAPTER KIT 1
    8 086660 NT .375-16NLG8 1
    9 767954 FW 0.379X.82X.06 HD ZN 3
    10 603846 NT .375-16 HX NL JAM ZN 3
    11 604331 CHUTE SPRING 1
    12 604346 PIN, DISCHARGE CHUTE 1
    13 604658 PIN, PULLER 2
    14 117877 PULLER, RS 1
    15 017301 HP .125 X2.375 ZN 2
    16 117878 PULLER, LS 1
    17 781567 NT .500-13NLG5 3
    18 767962 FW .531 x 1.063 x .175 9
    19 788166 WHEEL ASSY, ANTI SCALP 3
    20 601124 BLADE, 18.50"-L-F-CW 3
    Not Shown 601012 BLADE F18.50"-L-F-CW 3
    Not Shown 797696 BLADE, F18.50"-H-F-CW 3
    Not Shown 797704 BLADE, 18.50"-MUL-F-CW 3
    Not Shown 797712 BLADE, 18.50"-GAT-F-CW 3
    21 782474 CW .678 X 2.250 X .187 3
    22 781872 CS .625-11X1.250HXG5 3
    23 781708 CS .500-13X4.25 HX G5 ZN 1
    24 031997 ANTI-SCALP WHEEL 1
    25 053199 NT .500-13JAMG5 1

    1. Torque to 118 ft-lbs.

    2. Torque to 8 ft-lbs on these 4 self-tapping screws.

    3. Do not torque; the discharge chute must pivot freely.

    Item Part Number Description Qty Needed
    -- 607418 BLADE SPINDLE ASSY 1
    1 783548 RING, BLADE SPINDLE RET 1
    2 601827 BEARING, 6205 2RST C3 2
    3 601830 SPACER, BLADE SPINDLE 1
    4 601828 HOUSING, BLADE SPINDLE 1
    5 601829 SHAFT, BLADE SPINDLE 1

     

    Item Part Number Description Qty Needed
    1 118020 PIN, INDICATOR 1
    2 016899 NT .375-16 FLKG5 8
    3 118085 DECK LIFT W/A, REAR 1
    4 054502 NT .375-16HXG5 2
    5 767954 FW 0.379X.82X.06 HD ZN 8
    6 601839 PIVOT SPACER BUSHING 2
    7 118016 LIFT PEDAL, LINK 1
    8 005132 CS .375-16X1.12 HX G5 Z 1
    9 086660 NT .375-16NLG8 4
    10 605114 FW .41X.94X.25 UHMW 4
    11 791673 CLIP E,.625x.480x.042 Z 8
    12 118018 PIVOT, DECK LIFT 4
    13 604579 LINK, DECK LIFT 4
    14 604803 CE .375 x 2.00 W/BALE 4
    15 116151 PIVOT BLOCK, DECK LIFT 4
    16 029629 CS .375-16X0.75 HXF G5ZN 8
    17 036244 CS .375-16X1.00 HX G5 ZN 1
    18 118084 DECK LIFT W/A, FRONT 1
    19 604656 PIVOT SPACER BUSHING 2
    20 767962 FW .531 x 1.063 x .175 4
    21 781567 NT .500-13NLG5 2
    22 074252 CS .500-13X1.50 HX G5 ZN 2

     

    Item Part Number Description Qty Needed
    1 118020 PIN, INDICATOR 1
    2 016899 NT .375-16 FLKG5 8
    3 118085 DECK LIFT W/A, REAR 1
    4 054502 NT .375-16HXG5 2
    5 767954 FW 0.379X.82X.06 HD ZN 8
    6 601839 PIVOT SPACER BUSHING 2
    7 118016 LIFT PEDAL, LINK 1
    8 005132 CS .375-16X1.12 HX G5 Z 1
    9 086660 NT .375-16NLG8 4
    10 605114 FW .41X.94X.25 UHMW 4
    11 791673 CLIP E,.625x.480x.042 Z 8
    12 118018 PIVOT, DECK LIFT 4
    13 604579 LINK, DECK LIFT 4
    14 604803 CE .375 x 2.00 W/BALE 4
    15 116151 PIVOT BLOCK, DECK LIFT 4
    16 029629 CS .375-16X0.75 HXF G5ZN 8
    17 036244 CS .375-16X1.00 HX G5 ZN 1
    18 118084 DECK LIFT W/A, FRONT 1
    19 604656 PIVOT SPACER BUSHING 2
    20 767962 FW .531 x 1.063 x .175 4
    21 781567 NT .500-13NLG5 2
    22 074252 CS .500-13X1.50 HX G5 ZN 2

     

    60" Deck

    Item Part Number Description Qty Needed
    1 552269 60" SERVICE DECK 1
    2 604222 DECAL, DANGER / OBJECTS 1
    3 786277 DECAL, 60 DECK ID 1
    4 604221 DECAL, DANGER / CHUTE 1

    1. The deck includes decals

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 3
    2 767962 FW .531 x 1.063 x .175 3
    3 604792 IDLER PULLEY, 5.00" 1
    4 604251 NT .312-18 HXNL JAM G2ZN 7
    5 604252 FW .340X.68X.04 ZN 6
    6 604110 ANCHOR, SPRING TENSIONER 2
    7 607616 SPRING, DECK IDLER 1
    8 604791 SLED, IDLER 1
    9 604790 IDLER SLIDE, EXTRUDED 2
    10 604253 CB .50-13 X 2.00 STD ZN 1
    11 705954 CS .500-13X1.25 HX G5 ZN 3
    12 798603 FW .515X1.65X.12 HD ZN 3
    13 604661 SPACER, SPINDLE PULLEY 6
    14 604704 PULLEY, DECK DRIVE B-SEC 3
    15 054502 NT .375-16HXG5 12
    16 767954 FW 0.379X.82X.06 HD ZN 24
    17 126124 SVC KIT 604231 PULLEY 2
    18 005116 CS .375-16X1.38 HX G5 ZN 12
    19 607418 BLADE SPINDLE ASSY 3
    20 604254 CB .50-13 X 2.50 STD ZN 2
    21 083147 CB .312-18X .620 G5 ZN 7
    22 768523 FW 0.343SAE 1

    1. Torque to 73 ft-lbs.

    2. Torque to 30 ft-lbs.

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 3
    2 767962 FW .531 x 1.063 x .175 3
    3 604792 IDLER PULLEY, 5.00" 1
    4 604251 NT .312-18 HXNL JAM G2ZN 8
    5 604252 FW .340X.68X.04 ZN 6
    6 604110 ANCHOR, SPRING TENSIONER 2
    7 607616 SPRING, DECK IDLER 1
    8 604791 SLED, IDLER 1
    9 604790 IDLER SLIDE, EXTRUDED 2
    10 604253 CB .50-13 X 2.00 STD ZN 1
    11 705954 CS .500-13X1.25 HX G5 ZN 3
    12 798603 FW .515X1.65X.12 HD ZN 3
    13 604661 SPACER, SPINDLE PULLEY 6
    14 604704 PULLEY, DECK DRIVE B-SEC 3
    15 054502 NT .375-16HXG5 12
    16 767954 FW 0.379X.82X.06 HD ZN 24
    17 126124 SVC KIT 604231 PULLEY 2
    18 005116 CS .375-16X1.38 HX G5 ZN 12
    19 607418 BLADE SPINDLE ASSY 3
    20 604254 CB .50-13 X 2.50 STD ZN 1
    21 083147 CB .312-18X .620 G5 ZN 8
    22 017129 FW .440X1.00X0.08 ZN 2
    23 344267 FW .510X2.15X.19 ZN 1
    24 721910 CS .500-13X2.750HXG5 1

    1. Torque to 73 ft-lbs.

    2. Torque to 30 ft-lbs.

    Item Part Number Description Qty Needed
    1 781567 NT .500-13NLG5 3
    2 121780 BELT GUIDE 1
    3 767962 FW .531 x 1.063 x .175 3
    4 604792 IDLER PULLEY, 5.00" 1
    5 604251 NT .312-18 HXNL JAM G2ZN 8
    6 604252 FW .340X.68X.04 ZN 6
    7 604110 ANCHOR, SPRING TENSIONER 2
    8 607616 SPRING, DECK IDLER 1
    9 604791 SLED, IDLER 1
    10 604790 IDLER SLIDE, EXTRUDED 2
    11 604253 CB .50-13 X 2.00 STD ZN 1
    12 705954 CS .500-13X1.25 HX G5 ZN 3
    13 798603 FW .515X1.65X.12 HD ZN 3
    14 604661 SPACER, SPINDLE PULLEY 6
    15 604704 PULLEY, DECK DRIVE B-SEC 3
    16 054502 NT .375-16HXG5 12
    17 767954 FW 0.379X.82X.06 HD ZN 24
    18 126124 SVC KIT 604231 PULLEY 2
    19 005116 CS .375-16X1.38 HX G5 ZN 12
    20 607418 BLADE SPINDLE ASSY 3
    21 083147 CB .312-18X .620 G5 ZN 8
    22 017129 FW .440X1.00X0.08 ZN 2
    23 605516 FW .531 x 2.25 x .25 ZN 2
    24 721910 CS .500-13X2.750HXG5 2

    1. Torque to 73 ft-lbs.

    2. Torque to 30 ft-lbs

    Item Part Number Description Qty Needed
    -- 607418 BLADE SPINDLE ASSY 1
    1 783548 RING, BLADE SPINDLE RET 1
    2 601827 BEARING, 6205 2RST C3 2
    3 601830 SPACER, BLADE SPINDLE 1
    4 601828 HOUSING, BLADE SPINDLE 1
    5 601829 SHAFT, BLADE SPINDLE 1

     

    Item Part Number Description Qty Needed
    1 604722 PULLEY COVER, RIGHT SIDE 1
    2 604324 CS .250-20 X .75 HX FLG 4
    3 604711 DECK BELT 1
    4 604723 PULLEY COVER, LEFT SIDE 1
    5 604609 RSD DISCHARGE CHUTE 1
    6 604346 PIN, DISCHARGE CHUTE 1
    7 604331 CHUTE SPRING 1
    8 086660 NT .375-16NLG8 1
    9 604658 PIN, PULLER 2
    10 117877 PULLER, RS 1
    11 117878 PULLER, LS 1
    12 781567 NT .500-13NLG5 3
    13 767962 FW .531 x 1.063 x .175 5
    14 788166 WHEEL ASSY, ANTI SCALP 3
    15 793794 BLADE,20.50"-L-F-CW 3
    Not Shown 600901 BLADE, F20.50"-L-F-CW 3
    Not Shown 793935 BLADE,20.50"-CAT-F-CW 3
    Not Shown 794214 BLADE,20.50"-MUL-F-CW 3
    Not Shown 794230 BLADE,20.50"GAT-F-CW 3
    Not Shown 794685 BLADE, F20.50"-H-F-CW 3
    16 782474 CW .678 X 2.250 X .187 3
    17 781872 CS .625-11X1.250HXG5 3
    18 017301 HP .125 X2.375 ZN 2
    19 781708 CS .500-13X4.25 HX G5 ZN 1
    20 031997 ANTI-SCALP WHEEL 1
    21 053199 NT .500-13JAMG5 1

    1. Torque to 118 ft-lbs.

    2. Torque to 2–5 ft-lbs on these 4 self-tapping screws.

    3. Do not over-tighten. The discharge chute must pivot freely.

    Item Part Number Description Qty Needed
    1 118020 PIN, INDICATOR 1
    2 016899 NT .375-16 FLKG5 8
    3 118085 DECK LIFT W/A, REAR 1
    4 054502 NT .375-16HXG5 2
    5 767954 FW 0.379X.82X.06 HD ZN 8
    6 601839 PIVOT SPACER BUSHING 2
    7 118016 LIFT PEDAL, LINK 1
    8 005132 CS .375-16X1.12 HX G5 Z 1
    9 086660 NT .375-16NLG8 4
    10 605114 FW .41X.94X.25 UHMW 4
    11 791673 CLIP E,.625x.480x.042 Z 8
    12 118018 PIVOT, DECK LIFT 4
    13 604579 LINK, DECK LIFT 4
    14 604803 CE .375 x 2.00 W/BALE 4
    15 116151 PIVOT BLOCK, DECK LIFT 4
    16 029629 CS .375-16X0.75 HXF G5ZN 8
    17 036244 CS .375-16X1.00 HX G5 ZN 1
    18 118084 DECK LIFT W/A, FRONT 1
    19 604656 PIVOT SPACER BUSHING 2
    20 767962 FW .531 x 1.063 x .175 4
    21 781567 NT .500-13NLG5 2
    22 074252 CS .500-13X1.50 HX G5 ZN 2

     

    Item Part Number Description Qty Needed
    1 118020 PIN, INDICATOR 1
    2 016899 NT .375-16 FLKG5 8
    3 118085 DECK LIFT W/A, REAR 1
    4 054502 NT .375-16HXG5 2
    5 767954 FW 0.379X.82X.06 HD ZN 8
    6 601839 PIVOT SPACER BUSHING 2
    7 118016 LIFT PEDAL, LINK 1
    8 005132 CS .375-16X1.12 HX G5 Z 1
    9 086660 NT .375-16NLG8 4
    10 605114 FW .41X.94X.25 UHMW 4
    11 791673 CLIP E,.625x.480x.042 Z 8
    12 118018 PIVOT, DECK LIFT 4
    13 604579 LINK, DECK LIFT 4
    14 604803 CE .375 x 2.00 W/BALE 4
    15 116151 PIVOT BLOCK, DECK LIFT 4
    16 029629 CS .375-16X0.75 HXF G5ZN 8
    17 036244 CS .375-16X1.00 HX G5 ZN 1
    18 118084 DECK LIFT W/A, FRONT 1
    19 604656 PIVOT SPACER BUSHING 2
    20 767962 FW .531 x 1.063 x .175 4
    21 781567 NT .500-13NLG5 2
    22 074252 CS .500-13X1.50 HX G5 ZN 2

     

    Section 6: Seat

    Seat Assembly for Standard Seat

    Item Part Number Description Qty Needed
    1 792226 SEAT, MICHIGAN STANDARD 1
    2 552751 SVC, SEAT PAN 1
    3 604307 MOUNT, PUSH BUTTON 1
    4 605782 DECAL, LEVEL FUEL BLOWM 1
    5 000331 WIRE TIE, SMALL/SHORT 1
    6 086660 NT .375-16NLG8 2
    7 768523 FW 0.343SAE 4
    8 079186 CS .312-18X1.250HXG5 4
    9 029629 CS .375-16X0.75 HXF G5ZN 3
    10 793851 SPRING,COMP 1.25X4.00X 3
    11 016899 NT .375-16 FLKG5 3
    12 036244 CS .375-16X1.00 HX G5 ZN 2
    13 601815 DECAL, BATTERY WARNINGS 1
    14 712919 FW 0.406X1.00X.12 HD ZN 2

     

    Item Part Number Description Qty Needed
    1 792226 SEAT, MICHIGAN STANDARD 1
    2 552751 SVC, SEAT PAN 1
    3 604307 MOUNT, PUSH BUTTON 1
    4 000331 WIRE TIE, SMALL/SHORT 1
    5 086660 NT .375-16NLG8 2
    6 768523 FW 0.343SAE 4
    7 079186 CS .312-18X1.250HXG5 4
    8 029629 CS .375-16X0.75 HXF G5ZN 2
    9 793851 SPRING,COMP 1.25X4.00X 2
    10 016899 NT .375-16 FLKG5 2
    11 036244 CS .375-16X1.00 HX G5 ZN 2
    12 781419 DECAL, BELT ROUTING 1
    13 601815 DECAL, BATTERY WARNINGS 1
    14 712919 FW 0.406X1.00X.12 HD ZN 2

    1. Do not torque; the seat pan must pivot freely.

    2. Torque to 7 ft-lbs.

    3. When replacing the seat pan, order (2) washers 712919.

    4. The seat pan (552751) includes decals.

    Item Part Number Description Qty Needed
    -- 792226 SEAT, MICHIGAN STANDARD 1
    1 793315 SWITCH, SNAP MOUNT 1
    2 604458 EXT. ARMREST KIT L.H. 1
    3 604459 EXT. ARMREST KIT R.H. 1
    4 793273 ARMREST,STOP ASSY 1

     

    Seat Assembly for Removable Back Seat

     

    Item Part Number Description Qty Needed
    1 604874 SEAT, REMOVABLE BACK 1
    2 552751 SVC, SEAT PAN 1
    3 605782 DECAL, LEVEL FUEL BLOWM 1
    4 604307 MOUNT, PUSH BUTTON 1
    5 086660 NT .375-16NLG8 2
    6 712919 FW 0.406X1.00X.12 HD ZN 2
    7 000331 WIRE TIE, SMALL/SHORT 1
    8 768523 FW 0.343SAE 4
    9 079186 CS .312-18X1.250HXG5 4
    10 029629 CS .375-16X0.75 HXF G5ZN 3
    11 793851 SPRING,COMP 1.25X4.00X 3
    12 016899 NT .375-16 FLKG5 3
    13 036244 CS .375-16X1.00 HX G5 ZN 2
    14 601815 DECAL, BATTERY WARNINGS 1

    1. Do not torque; the seat pan must pivot freely.

    2. Torque to 7 ft-lbs.

    3. When replacing the seat pan, order (2) washers 712919.

    4. The seat pan (552751) includes the decals.

    Item Part Number Description Qty Needed
    1 604874 SEAT, REMOVABLE BACK 1
    2 552751 SVC, SEAT PAN 1
    3 604307 MOUNT, PUSH BUTTON 1
    4 086660 NT .375-16NLG8 2
    5 712919 FW 0.406X1.00X.12 HD ZN 2
    6 000331 WIRE TIE, SMALL/SHORT 1
    7 768523 FW 0.343SAE 4
    8 079186 CS .312-18X1.250HXG5 4
    9 029629 CS .375-16X0.75 HXF G5ZN 2
    10 793851 SPRING,COMP 1.25X4.00X 2
    11 016899 NT .375-16 FLKG5 2
    12 036244 CS .375-16X1.00 HX G5 ZN 2
    13 781419 DECAL, BELT ROUTING 1
    14 601815 DECAL, BATTERY WARNINGS 1

    1. Do not torque; the seat pan must pivot freely.

    2. Torque to 7 ft-lbs.

    3. When replacing the seat pan, order (2) washers 712919.

    4. The seat pan (552751) includes the decals.

    Item Part Number Description Qty Needed
    Not Shown 604874 SEAT, REMOVABLE BACK 1
    1 605135 BACK SEAT REMOVABLE 1
    REF 604948 BACK COVER 1
    2 604949 ARM REST (PAIR) 1
    3 605258 SEAT BOTTOM CUSHION 1
    REF 604947 SEAT COVER 1
    4 603148 N/O SEAT SWITCH 1

    1. The seat back (605135) does not include armrests.

    2. The seat bottom (605258) includes the switch.

    Seat Assembly for Seats Inc. Seat

    Item Part Number Description Qty Needed
    1 606077 S/C TO 607347 1
    2 712927 FW 0.344X1.00X.12 HD ZN 4
    3 604307 MOUNT, PUSH BUTTON 1
    4 552751 SVC, SEAT PAN 1
    5 767954 FW 0.379X.82X.06 HD ZN 4
    6 086660 NT .375-16NLG8 2
    7 768523 FW 0.343SAE 4
    8 079186 CS .312-18X1.250HXG5 4
    9 000331 WIRE TIE, SMALL/SHORT 1
    10 029629 CS .375-16X0.75 HXF G5ZN 2
    11 793851 SPRING,COMP 1.25X4.00X 2
    12 036244 CS .375-16X1.00 HX G5 ZN 2
    13 016899 NT .375-16 FLKG5 2
    14 602243 DECAL, BELT ROUTING 1
    15 601815 DECAL, BATTERY WARNINGS 1

    1. Do not torque; the seat pan must pivot freely.

    2. Torque to 9–14 ft-lbs.

    3. When replacing the seat pan, order (4) washers, 767954.

    4. The seat pan (552751) includes decals.

    5. 602243 is used on 36" & 42" mowers. 781419 is used on 48" & 54" mowers.

    Item Part Number Description Qty Needed
    Not Shown 606077 S/C TO 607347 1
    1 606081 SVC, ARM PADS 2
    2 606085 SVC, ARMEST SET 1
    3 606082 SVC, OPS 1
    4 606083 SVC, BACK CUSHION 1
    5 606084 SVC, SEAT CUSHION 1

    1. The arm bracket kit includes right and left side brackets

    Seat Assembly for 1110 EVC Seat

    Item Part Number Description Qty Needed
    1 606076 SEAT, SEATS INC 1110 EVC 1
    2 783829 FW 0.468X1.75X0.25 ZN 4
    3 604307 MOUNT, PUSH BUTTON 1
    4 552751 SVC, SEAT PAN 1
    5 767954 FW 0.379X.82X.06 HD ZN 4
    6 086660 NT .375-16NLG8 2
    7 768523 FW 0.343SAE 4
    8 079186 CS .312-18X1.250HXG5 4
    9 000331 WIRE TIE, SMALL/SHORT 1
    10 029629 CS .375-16X0.75 HXF G5ZN 2
    11 793851 SPRING,COMP 1.25X4.00X 2
    12 016899 NT .375-16 FLKG5 2
    13 036244 CS .375-16X1.00 HX G5 ZN 2
    14 781419 DECAL, BELT ROUTING 1
    15 601815 DECAL, BATTERY WARNINGS 1

    1. Do not torque; the seat pan must pivot freely.

    2. Torque to 9–14 ft-lbs.

    3. When replacing the seat pan, order (2) washers (712919).

    4. The seat pan (552751) includes decals.

    Item Part Number Description Qty Needed
    Not Shown 606076 SEAT, SEATS INC 1110 EVC 1
    1 606081 SVC, ARM PADS 1
    2 606080 SVC, ARMREST SET 1
    3 606082 SVC, OPS 1
    4 606078 SVC, BACK COVER 1
    5 606079 SVC, SEAT COVER 1

     

    If you need help finding parts for your equipment give us a call during business hours and one of our experts will be happy to assist you.

    410-692-5170