Hustler Super Z Parts (934984US, 934992, 935007, 935015US, 935023, 935031, 935049, 935056US & 935064) 2016-2017
All Hustler Parts Diagrams |
Welcome to the Hustler Super Z parts lookup page. All parts are OEM replacement parts from the Hustler Turf Warehouse in Heston, Kansas. This section is for the following Hustler Super Z model numbers:
934984US, 934992, 935007, 935015US, 935023, 935031, 935049, 935056US & 935064
All parts listed below are available and ship same day if in stock. If the parts are not in stock, lead time is 3 days. If you have any questions or would like help with parts lookup, give us a call and we will be happy to help!
410-692-5170
Section 1: Frame, Muffler Guard & Engine Guard
Item | Part Number | Description | Qty Needed |
1 | 553269 | SERVICE FRAME | 1 |
-- | 553159 | SVC FRAME, 60" SZ | 1 |
-- | 553158 | SVC FRAME,66",60"RD | 1 |
-- | 553160 | SVC FRAME, 72" SZ | 1 |
2 | 781880 | BUMPER, .500x 1.00x .31 | 4 |
3 | 781427 | DECAL, DECK HEIGHT INDI | 1 |
4 | 601993 | DECAL, SAFE OPERATION | 1 |
5 | N.A | SERIAL NUMBER / SPEC DECAL | 3 |
6 | 808493 | RIVET NUT, 3/8-16 THREA | 4 |
7 | 600961 | RIVET NUT, 1/2-13 THREAD | 4 |
8 | 602041 | DECAL, HOT | 2 |
9 | 602407 | DECAL, HUSTLER ID | 1 |
10 | 015495 | GREASE FITTING STRAIGHT | 4 |
1. Serial number decal. In the event the serial number decal becomes damaged or illegible, please contact your dealer to order a replacement.
2. Frames include decals, rivet nuts, bumpers and grease fittings.
Item | Part Number | Description | Qty Needed |
1 | 553427 | SVC, BUMPER WITH DECAL | 1 |
2 | 604352 | DECAL, H LOGO | 1 |
3 | 025395 | CB .375-16X 1.00 G5 ZN | 4 |
4 | 124385-1 | HITCH | 1 |
5 | 767962 | FW .531 x 1.063 x .175 | 4 |
6 | 705954 | CS .500-13X1.25 HX G5 ZN | 4 |
7 | 016899 | NT .375-16 FLKG5 | 4 |
8 | 121403 | MUFFLER GUARD | 1 |
9 | 377994 | HEAT SHIELD, MMZ ROLLER | 2 |
1. Part of the Wheel & Tire assembly.
2. The bumper includes the decal.
Item | Part Number | Description | Qty Needed |
1 | 603363 | DECAL, ANSI COMPLIANCE | 1 |
2 | 601908 | DECAL, SPARK ARRESTOR | 1 |
Section 2: Hydraulic System, Drive Belt, Clutch, Steering & Brake
Item | Part Number | Description | Qty Needed |
1 | N/A | RESERVOIR ASSEMBLY | 1 |
2 | 056069 | CS .375-16X0.63 HX G5 ZN | 1 |
3 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
4 | 036244 | CS .375-16X1.00 HX G5 ZN | 2 |
5 | 601571 | VIBRATION MOUNT | 1 |
6 | 601356 | S/C TO 608007 | 1 |
Not Shown | 608007 | OIL COOLER | 1 |
7 | 008193 | NT .500-13HXG5 | 4 |
8 | 767962 | FW .531 x 1.063 x .175 | 12 |
9 | N/A | RS PUMP ASSEMBLY | 1 |
10 | N/A | LS PUMP ASSEMBLY | 1 |
11 | 054502 | NT .375-16HXG5 | 3 |
12 | N/A | MOTOR ASSEMBLY | 2 |
13 | 023317 | NT .500-13UNTG8 | 8 |
14 | 602256 | CS .500-13X2.500 SQ G5 | 8 |
15 | 028274 | CB .500-13X 1.500 FULL | 4 |
Item | Part Number | Description | Qty Needed |
1 | 032763 | CAP, BREATHER | 1 |
2 | 032771 | STRAINER | 1 |
3 | 606088 | RESERVOIR, HYDRAULIC | 1 |
4 | 700484 | CLAMP, HOSE (FS) | 4 |
5 | 603045 | HOSE, PUMP SUCTION | 2 |
6 | 601523 | FTG, -8MORB/-8BT STR | 1 |
7 | 601001 | SPRING CLAMP, .75" DIA | 2 |
8 | 603819 | HOSE ASSY, COOLER-TANK | 1 |
9 | 781658 | FTG, -8MORB/HEX PLUG | 1 |
10 | 602768X | HYDRAULIC OIL FILTER | 1 |
Item | Part Number | Description | Qty Needed |
1 | 606089 | MOTOR, TG0310 HOS - HH | 1 |
2 | 781526 | FTG, 90°-10MORB/-8MORFS | 2 |
3 | 065516 | ROSS NUT | 1 |
4 | 064337 | ROSS WOODRUFF KEY | 1 |
5 | 748806 | ROSS VITON SEAL KIT | 1 |
Item | Part Number | Description | Qty Needed |
1 | 605759 | PUMP, H-G PY W/HOS-LS HH | 1 |
2 | 601001 | SPRING CLAMP, .75" DIA | 4 |
3 | 606102 | HOSE, PUMP DRAIN | 1 |
4 | 606101 | HOSE, PUMP DRAIN | 1 |
5 | 606100 | FTG, T -8 MORB/BT/BT | 1 |
6 | 744854 | O-RING TUBE ADAPTER 45 | 1 |
7 | 008581 | CS .250-20X1.500HXG5 | 1 |
8 | 768515 | FW 0.281SAE | 1 |
9 | 604831 | PUMP ARM, SZ | 1 |
10 | 068551 | NT .250-20 HXZY NL | 1 |
11 | 781542 | FTG, 90°-8MORB/-8MORFS | 2 |
12 | 604334 | TUBE, LP-TM LT LOOP | 1 |
13 | 604335 | TUBE, RP-BM LT LOOP | 1 |
14 | 784983 | SEAL KIT, PW PUMPS | 1 |
1. Torque to 8.2 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 605760 | PUMP, H-G PY W/HOS-RS-HH | 1 |
2 | 744854 | O-RING TUBE ADAPTER 45 | 1 |
3 | 601523 | FTG, -8MORB/-8BT STR | 1 |
4 | 781542 | FTG, 90°-8MORB/-8MORFS | 2 |
5 | 604333 | TUBE, LP-TM RT LOOP | 1 |
6 | 604332 | TUBE, RP-BM RT LOOP | 1 |
7 | 008581 | CS .250-20X1.500HXG5 | 1 |
8 | 768515 | FW 0.281SAE | 1 |
9 | 604831 | PUMP ARM, SZ | 1 |
10 | 068551 | NT .250-20 HXZY NL | 1 |
11 | 784983 | SEAL KIT, PW PUMPS | 1 |
1. Torque to 8.2 ft-lbs
Item | Part Number | Description | Qty Needed |
1 | 117196 | W/A, OIL COOLER MOUNT | 1 |
2 | 704163 | CS .250-20X2.000HXG5 | 4 |
3 | 768515 | FW 0.281SAE | 16 |
4 | 016253 | CB .312-18X .750 FUL ZN | 2 |
5 | 767954 | FW 0.379X.82X.06 HD ZN | 8 |
6 | 054502 | NT .375-16HXG5 | 4 |
7 | 109401 | SCREEN, OIL COOLER | 1 |
8 | 601357 | FAN, ELECTRIC 8" 12VDC | 1 |
9 | 056077 | CS .250-20X1.000HXG5 | 4 |
10 | 601538 | FOOT, ELECTRIC FAN | 4 |
11 | 068551 | NT .250-20 HXZY NL | 8 |
12 | 123687-3 | AIR DEFLECTOR | 1 |
13 | 034272 | NT .312-18HXG5 | 2 |
14 | 768523 | FW 0.343SAE | 2 |
15 | 036244 | CS .375-16X1.00 HX G5 ZN | 4 |
16 | 000430 | WIRE TIE, SMALL/LONG | 5 |
17 | 706531 | GM 1.12X1.75X1.37X.12 | 2 |
Item | Part Number | Description | Qty Needed |
1 | 051151 | CS .500-13X5.000HXG5 | 1 |
2 | 344267 | FW .510X2.15X.19 ZN | 1 |
3 | 212076 | KEY 1/4 SQ X 1.50 LG(FS) | 1 |
4 | 791251 | HARNESS, CLUTCH PIGTAIL | 1 |
5 | 603734 | PULLEY 6.67 OPX1.125SHFT | 1 |
6 | 606936K | CLUTCH KIT, CMS250 | 1 |
7 | 602680 | FW .453X1.12X.12 HRD ZN | 1 |
8 | 785048 | CS .437-20X3.00 HXG5 P85 | 1 |
9 | 034272 | NT .312-18HXG5 | 2 |
10 | 768523 | FW 0.343SAE | 4 |
11 | 113347 | CLUTCH ANCHOR | 1 |
12 | 036236 | CS .312-18X1.000HXG5 | 2 |
13 | 083196 | SS .312-18X0.750SQ | 4 |
14 | 602754 | PULLEY 7.35 OPx0.875SHFT | 2 |
15 | 210146 | KEY 1/4 SQ X 1.12 LONG | 2 |
16 | 054502 | NT .375-16HXG5 | 2 |
17 | 767954 | FW 0.379X.82X.06 HD ZN | 2 |
18 | 025007 | CS .62511X1.750HXG5 | 1 |
19 | 603783 | PULLEY, 6" FLAT IDLER | 1 |
20 | 602880 | BUSHING, IDLER PIVOT | 1 |
21 | 115536 | S/C TO 608005 | 1 |
Not Shown | 608005 | TENSIONER CAST | 1 |
22 | 602879 | BUSHING, IDLER PIVOT | 1 |
23 | 767962 | FW .531 x 1.063 x .175 | 1 |
24 | 781567 | NT .500-13NLG5 | 1 |
25 | 015495 | GREASE FITTING STRAIGHT | 1 |
26 | 601016 | IDLER SPRING | 1 |
27 | 601486 | EB, .375-16X3.00 FULTHD | 1 |
28 | 604208 | DRIVE BELT | 1 |
1. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.
2. Torque to 12–15 ft-lbs.
3. Torque to 71–75 ft-lbs. The tensioner should pivot freely.
Item | Part Number | Description | Qty Needed |
1 | N/A | STEERING COVER, S/A | 1 |
2 | 605670 | DECAL, SUPER Z ID | 1 |
3 | 109839 | HANDLE, Z W/A | 2 |
Not Shown | 781260 | GRIP, STEERING BAR | |
4 | 036244 | CS .375-16X1.00 HX G5 ZN | 6 |
5 | 767954 | FW 0.379X.82X.06 HD ZN | 2 |
6 | 055822 | CS .375-16X0.75 HX G5 ZN | 2 |
7 | 601087 | SWITCH, PLUNGER N.O. | 2 |
8 | 054502 | NT .375-16HXG5 | 2 |
9 | 795351 | DAMPER, CENTERING | 1 |
10 | 781922 | BALL STUD | 2 |
11 | 768523 | FW 0.343SAE | 2 |
12 | 029876 | LW .312 INTEXT ZN | 2 |
13 | 016832 | NT .312-18FLKG5 | 1 |
14 | 023655 | NT 0.312-24 NL G8 | 2 |
15 | 781153 | BUSHING, UHMW | 2 |
1. The handle includes the grip.
Item | Part Number | Description | Qty Needed |
1 | 604295 | STEERING BOX SUB, RH | 1 |
2 | 604296 | STEERING BOX SUB, LH | 1 |
3 | 023655 | NT 0.312-24 NL G8 | 2 |
4 | 768523 | FW 0.343SAE | 6 |
5 | 034272 | NT .312-18HXG5 | 2 |
6 | 781922 | BALL STUD | 2 |
7 | 712927 | FW 0.344X1.00X.12 HD ZN | 2 |
8 | 781286 | PUMP ROD ADJUSTER ASSY | 2 |
9 | 112895 | STEERING COVER W/A, SZ | 1 |
10 | 608000 | BUSHING | 2 |
11 | 603078 | FW .750X1.50X.16 ZN | 2 |
12 | 784439 | LOCK COLLAR,0.757 ID(FS) | 2 |
13 | 113007 | STEER PIVOT TUBE, SZ | 1 |
14 | 080358 | GM .50X1.00X.75X.12 | 1 |
15 | 053199 | NT .500-13JAMG5 | 2 |
16 | 603055 | SS .500-13X 2.50 SH ZN | 2 |
17 | 722199P | POLYURETHANE 2" FS - 1 FT | 1 |
WEAR TAPE LENGTH A: 5.5" +/- 0.3"
1. The steering cover includes the decal.
Item | Part Number | Description | Qty Needed |
1 | 607152 | STEERING ARM W/A | 1 |
2 | 086660 | NT .375-16NLG8 | 3 |
3 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
4 | 705178 | CS .375-16X1.750HXG5 | 3 |
5 | 112898 | STEERING BOX W/A, RH | 1 |
6 | 608000 | BUSHING | 2 |
7 | 348862 | STEERLEVER BUSHING (PLA | 2 |
8 | 047456 | GM .750X.188X1.00X.12 | 1 |
9 | 797738 | SS .500-13X2.000SH | 1 |
1. Torque all hardware to 33 ft-lbs ± 10%.
Item | Part Number | Description | Qty Needed |
1 | 607152 | STEERING ARM W/A | 1 |
2 | 086660 | NT .375-16NLG8 | 3 |
3 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
4 | 705178 | CS .375-16X1.750HXG5 | 3 |
5 | 112899 | STEERING BOX W/A, LH | 1 |
6 | 608000 | BUSHING | 2 |
7 | 348862 | STEERLEVER BUSHING (PLA | 2 |
8 | 047456 | GM .750X.188X1.00X.12 | 1 |
9 | 797738 | SS .500-13X2.000SH | 1 |
Item | Part Number | Description | Qty Needed |
1 | 086660 | NT .375-16NLG8 | 2 |
2 | 767954 | FW 0.379X.82X.06 HD ZN | 12 |
3 | 023655 | NT 0.312-24 NL G8 | 4 |
4 | 768523 | FW 0.343SAE | 12 |
5 | 781583 | BRAKE ROD ASSEMBLY | 2 |
6 | 112907 | BRAKE BELLCRANK, SZ LS | 1 |
Not Shown | 112906 | BRAKE BELLCRANK, SZ RS | 1 |
7 | 765339 | BUSHING,IGUS#0608 (FS) | 4 |
8 | 054502 | NT .375-16HXG5 | 4 |
9 | 350397 | BRAKE LINK TURNBUCKLE A | 2 |
10 | 005116 | CS .375-16X1.38 HX G5 ZN | 4 |
11 | 052514 | CS .375-16X4.500HXG5 | 2 |
12 | 034272 | NT .312-18HXG5 | 4 |
13 | 111309 | BRAKE ARM,Z4 | 2 |
14 | 037887 | CB .312-18X 1.000 FUL ZN | 4 |
15 | 604461 | CS .312-18X.75HXG8 FL | 8 |
16 | 602384 | HUB ASSY, PARKER | 2 |
17 | 602383 | BRAKE ASSY, PARKER | 2 |
18 | 606124 | STUD 1/2-20 X 1 1/2" | 5 |
1. Included with the wheel motor.
2. Torque to 220–240 ft-lbs.
3. Torque to 27 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.
4. The hub assembly includes the studs.
Section 3: Wheels & Tires
Item | Part Number | Description | Qty Needed |
1 | 705954 | CS .500-13X1.25 HX G5 ZN | 2 |
2 | 798603 | FW .515X1.65X.12 HD ZN | 2 |
3 | 601375 | O-RING, SAE-14 | 2 |
4 | 603153 | DUST CAP, SZ CASTER | 2 |
5 | 784223 | BEARING | 4 |
6 | 387035 | SPACER, 1.07x1.312x2.79 | 2 |
7 | 603164 | BEARING DISC, FORK | 2 |
8 | N/A | FRONT TIRE SUB-ASSEMBLY | 2 |
9 | 782078 | TIR/WHL 24X9.50-12 SLV | 2 |
10 | 061077 | WHEEL NUT | 10 |
11 | 068239 | CS .500-13X4.500HXG5 | 2 |
12 | 767962 | FW .531 x 1.063 x .175 | 4 |
13 | 602345 | SPACER, ANTI-SCALP 3.22 | 2 |
14 | 602263 | WHEEL, ANTI-SCALP | 2 |
15 | 008193 | NT .500-13HXG5 | 2 |
1. Torque to 65–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 705954 | CS .500-13X1.25 HX G5 ZN | 2 |
2 | 798603 | FW .515X1.65X.12 HD ZN | 2 |
3 | 601375 | O-RING, SAE-14 | 2 |
4 | 603153 | DUST CAP, SZ CASTER | 2 |
5 | 784223 | BEARING | 4 |
6 | 387035 | SPACER, 1.07x1.312x2.79 | 2 |
7 | 603164 | BEARING DISC, FORK | 2 |
8 | N/A | FRONT TIRE SUB-ASSEMBLY | 2 |
9 | 606968 | TIR/WHL 24X12.00-12 SLV | 2 |
Not Shown | 601238 | S/C TO 606968 | 2 |
10 | 061077 | WHEEL NUT | 10 |
11 | 068239 | CS .500-13X4.500HXG5 | 2 |
12 | 767962 | FW .531 x 1.063 x .175 | 4 |
13 | 602345 | SPACER, ANTI-SCALP 3.22 | 2 |
14 | 602263 | WHEEL, ANTI-SCALP | 2 |
15 | 008193 | NT .500-13HXG5 | 2 |
1. Torque to 65–75 ft-lbs.
2. 606968 is used on mowers S/N 17120035 & higher. 601238 is used on mowers prior to S/N 17120035.
Item | Part Number | Description | Qty Needed |
1 | 705954 | CS .500-13X1.25 HX G5 ZN | 2 |
2 | 798603 | FW .515X1.65X.12 HD ZN | 2 |
3 | 601375 | O-RING, SAE-14 | 2 |
4 | 603153 | DUST CAP, SZ CASTER | 2 |
5 | 784223 | BEARING | 4 |
6 | 387035 | SPACER, 1.07x1.312x2.79 | 2 |
7 | 603164 | BEARING DISC, FORK | 2 |
8 | N/A | FRONT TIRE SUB-ASSEMBLY | 2 |
9 | 784058 | TIR/WHL 24X12.00-12 SLV | 2 |
10 | 061077 | WHEEL NUT | 10 |
11 | 068239 | CS .500-13X4.500HXG5 | 2 |
12 | 767962 | FW .531 x 1.063 x .175 | 4 |
13 | 602345 | SPACER, ANTI-SCALP 3.22 | 2 |
14 | 602263 | WHEEL, ANTI-SCALP | 2 |
15 | 008193 | NT .500-13HXG5 | 2 |
1. Torque to 65–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 116890 | FORK W/A, HEAVY DUTY | 1 |
Not Shown | 113621 | FORK W/A, STANDARD | 1 |
2 | 061101 | NT .750-10 HX ZN NL GR B | 1 |
3 | 025296 | FW .760X1.63X0.08 ZN | 2 |
4 | 041475 | CS .750-10X9.50 HX G5 ZN | 1 |
5 | 606744 | TIR/WHL 13X6.50-6 SLV | 1 |
6 | 039677 | WHEEL BEARING | 2 |
7 | 019521 | TIRE VALVE TR-412 GOODY | 1 |
8 | 782771 | SPACER, BEARING (SERV P | 1 |
9 | 604843 | TIR 13X6.50-6 B4R SMTH | 1 |
10 | 606751 | WHL 6X4.50 SLV | 1 |
Item | Part Number | Description | Qty Needed |
1 | 782284 | TIR 24X9.50-12 B4R LTFT | 1 |
2 | 606821 | WHL 12X7.00 5X4.5 SLV | 1 |
3 | 019521 | TIRE VALVE TR-412 GOODY | 1 |
Item | Part Number | Description | Qty Needed |
1 | 781245 | S/C TO 606967 | 1 |
2 | 606820 | WHL 12X8.50 5X4.5 SLV | 1 |
3 | 019521 | TIRE VALVE TR-412 GOODY | 1 |
Item | Part Number | Description | Qty Needed |
1 | 781245 | S/C TO 606967 | 1 |
2 | 606819 | WHL 12X8.50 5X4.5 SLV | 1 |
3 | 019521 | TIRE VALVE TR-412 GOODY | 1 |
Section 4: Engine, Muffler & Fuel System
Item | Part Number | Description | Qty Needed |
1 | -- | ENGINE, KAW FX850V | 1 |
2 | 788943 | AIR FILTER INDICATOR | 1 |
3 | 601216 | FTG, ELBOW, STREET | 1 |
4 | 720516 | CS M8-1.25X16HX FL10.9 | 1 |
5 | 768523 | FW 0.343SAE | 6 |
6 | 605155 | BATTERY CABLE, NEGATIVE | 1 |
7 | 029876 | LW .312 INTEXT ZN | 1 |
8 | 604029 | BATTERY CABLE, POSITIVE | 1 |
9 | 034272 | NT .312-18HXG5 | 2 |
10 | 045088 | HOSE CLAMP 1" (FS) | 1 |
11 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
12 | 602580 | CS .375-16X1.25HXG8ZYP85 | 4 |
13 | 602827 | CB .312-18X 1.250 ZN | 1 |
14 | 603012 | MUFFLER, FX850V | 1 |
15 | 796524 | VALVE,OIL DRAIN M20x2.5 | 1 |
16 | 000331 | WIRE TIE, SMALL/SHORT | 4 |
17 | 603112 | CLAMP, 3/16 FUEL | 1 |
18 | 000323 | CLIP, HOSE CLAMP | 2 |
19 | 036236 | CS .312-18X1.000HXG5 | 3 |
20 | 603326P | VAPOR LINE, 3/16" - 7 FT | 1 |
21 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
22 | 114578 | ANGLE, BRACE | 1 |
23 | 016832 | NT .312-18FLKG5 | 3 |
24 | 015818P | FUEL LINE, 1/4" - 6 FT | 1 |
1. Part of the wire harness.
2. Supplied with the engine.
3. Torque to 12 ft-lbs plus 60° rotation of the cap screw head. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.
4. Torque to 17 ft-lbs.
FUEL & VAPOR LINE LENGTHS
A: 17" fuel line from the fuel valve to the engine
B: 34" vapor line from the vapor tee to the engine
Item | Part Number | Description | Qty Needed |
1 | -- | ENGINE, KAW FX1000V | 1 |
2 | 788943 | AIR FILTER INDICATOR | 1 |
3 | 601216 | FTG, ELBOW, STREET | 1 |
4 | 796524 | VALVE,OIL DRAIN M20x2.5 | 1 |
5 | 016832 | NT .312-18FLKG5 | 4 |
6 | 043570 | CLIP - HOSE - SINGLE(FS) | 2 |
7 | 768523 | FW 0.343SAE | 9 |
8 | 029876 | LW .312 INTEXT ZN | 1 |
9 | 036236 | CS .312-18X1.000HXG5 | 4 |
10 | 034272 | NT .312-18HXG5 | 4 |
11 | 606205 | BRACKET, THROTTLE WIRE | 1 |
12 | 122504 | BRACKET, MUFFLER RT | 1 |
13 | 016253 | CB .312-18X .750 FUL ZN | 2 |
14 | 122505 | BRACKET, MUFFLER LFT | 1 |
15 | 720516 | CS M8-1.25X16HX FL10.9 | 7 |
16 | 606040 | MUFFLER, FX1000V | 1 |
17 | 045088 | HOSE CLAMP 1" (FS) | 1 |
18 | 602827 | CB .312-18X 1.250 ZN | 1 |
19 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
20 | 602580 | CS .375-16X1.25HXG8ZYP85 | 4 |
21 | 605155 | BATTERY CABLE, NEGATIVE | 1 |
22 | 604029 | BATTERY CABLE, POSITIVE | 1 |
23 | 000323 | CLIP, HOSE CLAMP | 2 |
24 | 015818P | FUEL LINE, 1/4" - 6 FT | 1 |
25 | 114578 | ANGLE, BRACE | 1 |
26 | 000331 | WIRE TIE, SMALL/SHORT | 5 |
27 | 603326P | VAPOR LINE, 3/16" - 7 FT | 1 |
28 | 603112 | CLAMP, 3/16 FUEL | 1 |
1. Part of the wire harness.
2. Supplied with the engine.
3. Torque to 12 ft-lbs plus 60° rotation of the cap screw head. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.
4. Torque to 17 ft-lbs.
FUEL & VAPOR LINE LENGTHS
A: 14" fuel line from the fuel valve to the engine
B: 34" vapor line from the vapor tee to the engine
Item | Part Number | Description | Qty Needed |
1 | 603807 | CAP, 3.5" RATCHETING GAS | 2 |
2 | 605102 | S/C TO 607872 | 1 |
Not Shown | 607872 | FUEL TANK ASM, LH FENDER | 1 |
3 | 605101 | S/C TO 607873 | 1 |
Not Shown | 607873 | FUEL TANK ASM, RH FENDER | 1 |
4 | 000323 | CLIP, HOSE CLAMP | 4 |
5 | 603326P | VAPOR LINE, 3/16" - 7 FT | 1 |
6 | 604281 | TEE, 3/16" PLASTIC | 2 |
7 | 015818P | FUEL LINE, 1/4" - 6 FT | 1 |
8 | 745059 | FUEL VALVE 3-WAY | 1 |
9 | 604323 | VAPOR SYSTEM FILTER | 1 |
10 | 712919 | FW 0.406X1.00X.12 HD ZN | 10 |
11 | 055822 | CS .375-16X0.75 HX G5 ZN | 10 |
12 | 036236 | CS .312-18X1.000HXG5 | 3 |
13 | 768523 | FW 0.343SAE | 3 |
14 | 043570 | CLIP - HOSE - SINGLE(FS) | 3 |
15 | 016832 | NT .312-18FLKG5 | 3 |
16 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
17 | 768515 | FW 0.281SAE | 4 |
18 | 115998 | COVER, TANK | 1 |
19 | 115999 | COVER, TANK | 1 |
20 | 000331 | WIRE TIE, SMALL/SHORT | 1 |
1. Torque to 16 ft-lbs.
2. Part of the wire harness.
FUEL & VAPOR LINE LENGTHS
A: 17" vapor line from the left tank to the vapor tee
B: 24" vapor line from the vapor tee to the vapor tee
C: 24" vapor line from the right tank to the vapor tee
D: 9" vapor line from the vapor tee to the fuel filter
E: 44" fuel line from the right tank to the fuel valve
F: 22" fuel line from the left tank to the fuel valve
Item | Part Number | Description | Qty Needed |
1 | 785261 | AIR FILTER - MAIN | 1 |
2 | 785279 | AIR FILTER - SAFETY | 1 |
3 | 068478 | FUEL FILTER - IN LINE | 1 |
4 | 763318 | VALVE, VACUATOR | 1 |
5 | 603138 | ENGINE OIL FILTER | 1 |
Item | Part Number | Description | Qty Needed |
1 | -- | ENGINE, KOH ECV860 | 1 |
Not Shown | -- | ENGINE, KOH ECV 880 | 1 |
2 | 720516 | CS M8-1.25X16HX FL10.9 | 1 |
3 | 605828 | MUFFLER, KOH 824 ECV | 4 |
4 | 034272 | NT .312-18HXG5 | 1 |
5 | 768523 | FW 0.343SAE | 1 |
6 | 045088 | HOSE CLAMP 1" (FS) | 2 |
7 | 602827 | CB .312-18X 1.250 ZN | 1 |
8 | 767954 | FW 0.379X.82X.06 HD ZN | 1 |
9 | 602580 | CS .375-16X1.25HXG8ZYP85 | 1 |
10 | 793885 | LW .375 INTEXT ZN | 1 |
11 | 000331 | WIRE TIE, SMALL/SHORT | 4 |
12 | 605155 | BATTERY CABLE, NEGATIVE | 1 |
13 | 604029 | BATTERY CABLE, POSITIVE | 1 |
14 | 000323 | CLIP, HOSE CLAMP | 2 |
15 | 015818P | FUEL LINE, 1/4" - 6 FT | 1 |
16 | 036236 | CS .312-18X1.000HXG5 | 3 |
17 | 605215P | THERMAL SHIELD - 6 FT | 1 |
18 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
19 | 114578 | ANGLE, BRACE | 1 |
20 | 016832 | NT .312-18FLKG5 | 3 |
21 | 603326P | VAPOR LINE, 3/16" - 7 FT | 1 |
1. Part of the wire harness.
2. Supplied with the engine.
3. Torque to 12 ft-lbs plus 60° rotation of the cap screw head. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.
4. Torque to 17 ft-lbs.
5. Torque to 14 ft-lbs.
A: 17" fuel line from the fuel valve to the engine
B: 15" fuel line thermal shield
C: 17" vapor line from the vapor tee to the engine
Item | Part Number | Description | Qty Needed |
1 | 602587 | AIR FILTER - MAIN | 1 |
2 | 602586 | AIR FILTER - SAFETY | 1 |
3 | 606228 | FUEL FILTER, KOH ECV | 1 |
4 | 606095 | ENGINE OIL FILTER | 1 |
5 | 796672 | VALVE,OIL DRAIN 3/8-18 | 1 |
Item | Part Number | Description | Qty Needed |
1 | 603807 | CAP, 3.5" RATCHETING GAS | 2 |
2 | 605101 | S/C TO 607873 | 1 |
Not Shown | 607873 | FUEL TANK ASM, RH FENDER | 1 |
3 | 605102 | S/C TO 607872 | 1 |
Not Shown | 607872 | FUEL TANK ASM, LH FENDER | 1 |
4 | 000323 | CLIP, HOSE CLAMP | 4 |
5 | 015818P | FUEL LINE, 1/4" - 6 FT | 66" |
6 | 605215P | THERMAL SHIELD - 6 FT | 62" |
7 | 000331 | WIRE TIE, SMALL/SHORT | 3 |
8 | 745059 | FUEL VALVE 3-WAY | 1 |
9 | 767954 | FW 0.379X.82X.06 HD ZN | 10 |
10 | 055822 | CS .375-16X0.75 HX G5 ZN | 10 |
11 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
12 | 768515 | FW 0.281SAE | 4 |
13 | 115998 | COVER, TANK | 1 |
14 | 115999 | COVER, TANK | 1 |
16 | 116229 | COVER, REAR | 1 |
17 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
18 | 768515 | FW 0.281SAE | 4 |
19 | 116228 | COVER, FRONT | 1 |
1. Torque to 16 ft-lbs.
2. Part of the wire harness.
A: 44" fuel line from the right tank to the fuel valve
B: 42" fuel line thermal shield
C: 22" fuel line from the left tank to the fuel valve
D: 20" fuel line thermal shield
Item | Part Number | Description | Qty Needed |
1 | 603807 | CAP, 3.5" RATCHETING GAS | 2 |
2 | 605101 | S/C TO 607873 | 1 |
Not Shown | 607873 | FUEL TANK ASM, RH FENDER | 1 |
3 | 605102 | S/C TO 607872 | 1 |
Not Shown | 607872 | FUEL TANK ASM, LH FENDER | 1 |
4 | 000323 | CLIP, HOSE CLAMP | 4 |
5 | 015818P | FUEL LINE, 1/4" - 6 FT | 66" |
6 | 605215P | THERMAL SHIELD - 6 FT | 62" |
7 | 000331 | WIRE TIE, SMALL/SHORT | 3 |
8 | 745059 | FUEL VALVE 3-WAY | 1 |
9 | 767954 | FW 0.379X.82X.06 HD ZN | 10 |
10 | 055822 | CS .375-16X0.75 HX G5 ZN | 10 |
11 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
12 | 768515 | FW 0.281SAE | 4 |
13 | 115998 | COVER, TANK | 1 |
14 | 115999 | COVER, TANK | 1 |
15 | 603326P | VAPOR LINE, 3/16" - 7 FT | 83" |
16 | 604281 | TEE, 3/16" PLASTIC | 1 |
17 | 604314 | CARBON CANISTER, 9 GAL | 2 |
18 | 036236 | CS .312-18X1.000HXG5 | 7 |
19 | 768523 | FW 0.343SAE | 7 |
20 | 602980 | CLAMP, CUSHIONED 3.0" | 4 |
21 | 601069 | CN .312-18x.200 MAX THK | 4 |
22 | 016832 | NT .312-18FLKG5 | 3 |
23 | 043570 | CLIP - HOSE - SINGLE(FS) | 3 |
24 | 603161 | VACUUM BREAKER FILTER | 1 |
E: 30" vapor line from the right tank to the right carbon canister
F: 9" vapor line from the right carbon canister to the vapor tee
G: 14" vapor line from the left carbon canister to the vapor tee
H: 30" vapor line from the left tank to the left carbon canister
Item | Part Number | Description | Qty Needed |
1 | 603807 | CAP, 3.5" RATCHETING GAS | 2 |
2 | 605102 | S/C TO 607872 | 1 |
Not Shown | 607872 | FUEL TANK ASM, LH FENDER | 1 |
3 | 605101 | S/C TO 607873 | 1 |
Not Shown | 607873 | FUEL TANK ASM, RH FENDER | 1 |
4 | 000323 | CLIP, HOSE CLAMP | 4 |
5 | 603326P | VAPOR LINE, 3/16" - 7 FT | 77" |
6 | 604281 | TEE, 3/16" PLASTIC | 2 |
7 | 015818P | FUEL LINE, 1/4" - 6 FT | 66" |
8 | 605215P | THERMAL SHIELD - 6 FT | 62" |
9 | 745059 | FUEL VALVE 3-WAY | 1 |
10 | 604323 | VAPOR SYSTEM FILTER | 1 |
11 | 712919 | FW 0.406X1.00X.12 HD ZN | 10 |
12 | 055822 | CS .375-16X0.75 HX G5 ZN | 10 |
13 | 036236 | CS .312-18X1.000HXG5 | 3 |
14 | 768523 | FW 0.343SAE | 3 |
15 | 043570 | CLIP - HOSE - SINGLE(FS) | 3 |
16 | 016832 | NT .312-18FLKG5 | 3 |
17 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
18 | 768515 | FW 0.281SAE | 4 |
19 | 115998 | COVER, TANK | 1 |
20 | 115999 | COVER, TANK | 1 |
21 | 000331 | WIRE TIE, SMALL/SHORT | 1 |
1. Torque to 16 ft-lbs.
2. Part of the wire harness.
A: 37" vapor line from the left tank to the vapor tee
B: 7" vapor line from the tee to the tee
C: 24" vapor line from the right tank to the vapor tee
D: 9" vapor line from the vapor tee to the fuel filter
E: 22" fuel line from the left tank to the fuel valve
F: 44" fuel line from the right tank to the fuel valve
G: 42" fuel line thermal shield
H: 20" fuel line thermal shield
Item | Part Number | Description | Qty Needed |
Not Shown | 607872 | FUEL TANK ASM, LH FENDER | 1 |
1 | 603888K | SVC KIT, FUEL SENDER | 1 |
2 | 603888K | SVC KIT, FUEL SENDER | 1 |
Not Shown | 608041 | FUEL GAUGE & SENDER KIT | 1 |
3 | 604287K | VENT FITTING SVC KIT | 2 |
4 | 604200K | GROMMET SVC KIT | 1 |
5 | 605158K | SUCTION HOSE SVC KIT | 1 |
Item | Part Number | Description | Qty Needed |
Not Shown | 607873 | FUEL TANK ASM, LH FENDER | 1 |
1 | 608041 | FUEL GAUGE & SENDER KIT | 1 |
2 | 603888K | SVC KIT, FUEL SENDER | 1 |
Not Shown | 603889K | SVC KIT, TANK GROMMET | 1 |
3 | 604287K | VENT FITTING SVC KIT | 2 |
4 | 604200K | GROMMET SVC KIT | 1 |
5 | 605158K | SUCTION HOSE SVC KIT | 1 |
Section 5: Battery, Instrument Panel & Wire Harness
Item | Part Number | Description | Qty Needed |
1 | 000331 | WIRE TIE, SMALL/SHORT | 3 |
2 | 124387-1 | BATTERY STRAP, SZ GRP 45 | 1 |
3 | 050823 | CS .312-18X5.000HXG5 | 2 |
4 | 768523 | FW 0.343SAE | 2 |
5 | 601069 | CN .312-18x.200 MAX THK | 2 |
Item | Part Number | Description | Qty Needed |
1 | 601095 | CABLE, CHOKE | 1 |
2 | 603523 | KNOB | 1 |
3 | 601098 | CB 10-24 X .500 ZYNC | 2 |
4 | 776476 | SWITCH, PTO 6201-321 | 1 |
5 | 712257 | INDICATOR LIGHT, RED(FS) | 1 |
6 | 606068 | GAUGE, FUEL/HOURMETER | 1 |
7 | 785808 | KEY ASSEMBLY | 1 |
8 | 045898 | IGNITION SWITCH | 1 |
9 | 604373 | RELAY CONTROL MODULE | 1 |
10 | 059832 | NT #10-24 HX NL ZN | 4 |
11 | 553453 | SVC, INSTRUMENT PANEL | 1 |
12 | 063198 | CS #10-24X0.750FLKG5 | 2 |
13 | 704932 | FW 0.219X.50X.05 ZN | 2 |
14 | 603847 | CABLE, THROTTLE 50.0" | 1 |
15 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
16 | 768515 | FW 0.281SAE | 4 |
17 | 000430 | WIRE TIE, SMALL/LONG | 1 |
18 | 606075 | DECAL, INST PANEL | 1 |
19 | 034280 | CS .312-18X0.750HXG5 | 1 |
20 | 768523 | FW 0.343SAE | 2 |
21 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
22 | 034272 | NT .312-18HXG5 | 1 |
23 | 604241 | WIRE HARNESS | 1 |
24 | 000331 | WIRE TIE, SMALL/SHORT | 8 |
25 | 114052 | KIT, CLUTCH CONN. REP | 1 |
26 | 604430 | WIRE HARNESS | 1 |
27 | 601047 | HOLDER, FUSE | 1 |
1. Part of the wire harness.
2. The instrument panel includes the decal.
Item | Part Number | Description | Qty Needed |
1 | 601095 | CABLE, CHOKE | 1 |
2 | 603523 | KNOB | 1 |
3 | 601098 | CB 10-24 X .500 ZYNC | 2 |
4 | 776476 | SWITCH, PTO 6201-321 | 1 |
5 | 712257 | INDICATOR LIGHT, RED(FS) | 1 |
6 | 606068 | GAUGE, FUEL/HOURMETER | 1 |
7 | 785808 | KEY ASSEMBLY | 1 |
8 | 045898 | IGNITION SWITCH | 1 |
9 | 604373 | RELAY CONTROL MODULE | 1 |
10 | 059832 | NT #10-24 HX NL ZN | 4 |
11 | 553453 | SVC, INSTRUMENT PANEL | 1 |
12 | 063198 | CS #10-24X0.750FLKG5 | 2 |
13 | 704932 | FW 0.219X.50X.05 ZN | 2 |
14 | 603409 | CABLE, THRTL 60" | 1 |
15 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
16 | 768515 | FW 0.281SAE | 4 |
17 | 000430 | WIRE TIE, SMALL/LONG | 1 |
18 | 606075 | DECAL, INST PANEL | 1 |
19 | 034280 | CS .312-18X0.750HXG5 | 1 |
20 | 768523 | FW 0.343SAE | 2 |
21 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
22 | 034272 | NT .312-18HXG5 | 1 |
23 | 604241 | WIRE HARNESS | 1 |
24 | 000331 | WIRE TIE, SMALL/SHORT | 8 |
25 | 114052 | KIT, CLUTCH CONN. REP | 1 |
26 | 604430 | WIRE HARNESS | 1 |
27 | 601047 | HOLDER, FUSE | 1 |
1. Part of the wire harness.
2. The instrument panel includes the decal.
Item | Part Number | Description | Qty Needed |
1 | 776476 | SWITCH, PTO 6201-321 | 1 |
2 | 606068 | GAUGE, FUEL/HOURMETER | 1 |
3 | 603523 | KNOB | 1 |
4 | 712257 | INDICATOR LIGHT, RED(FS) | 2 |
5 | 785808 | KEY ASSEMBLY | 1 |
6 | 045898 | IGNITION SWITCH | 1 |
7 | 604373 | RELAY CONTROL MODULE | 1 |
8 | 059832 | NT #10-24 HX NL ZN | 4 |
9 | 601098 | CB 10-24 X .500 ZYNC | 2 |
10 | 063198 | CS #10-24X0.750FLKG5 | 2 |
11 | 603847 | CABLE, THROTTLE 50.0" | 1 |
12 | 704932 | FW 0.219X.50X.05 ZN | 2 |
13 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
14 | 768515 | FW 0.281SAE | 4 |
15 | 606156 | DECAL, INSTRUMENT PANEL | 1 |
16 | 553454 | SVC, INSTRUMENT PANEL | 1 |
17 | 000430 | WIRE TIE, SMALL/LONG | 1 |
18 | 034280 | CS .312-18X0.750HXG5 | 1 |
19 | 768523 | FW 0.343SAE | 2 |
20 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
21 | 034272 | NT .312-18HXG5 | 1 |
22 | 606165 | WIRE HARNESS | 1 |
23 | 000331 | WIRE TIE, SMALL/SHORT | 8 |
24 | 114052 | KIT, CLUTCH CONN. REP | 1 |
2 | 601047 | HOLDER, FUSE | 1 |
1. Part of the wire harness.
2. The instrument panel includes the decal.
Section 6: Deck, Deck Belt, Blades & Deck Lift
Item | Part Number | Description | Qty Needed |
1 | 553085 | 54" SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 781419 | DECAL, BELT ROUTING | 1 |
4 | 601892 | DECAL, THROWN OBJECTS | 1 |
5 | 601837 | DECAL, DECK DANGERS | 1 |
6 | 603092 | DECAL, VX4 TECHNOLOGY | 1 |
7 | 799171 | DECAL, 54" DECK ID | 1 |
8 | 604221 | DECAL, DANGER / CHUTE | 1 |
1. The deck includes the decals.
1. Torque to 67–75 ft-lbs.
1. Do not torque; the discharge chute must pivot freely.
2. Torque to 118 ft-lbs.
3. Torque to 10 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 550739 | 60" SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 781419 | DECAL, BELT ROUTING | 1 |
4 | 604221 | DECAL, DANGER / CHUTE | 1 |
5 | 601837 | DECAL, DECK DANGERS | 2 |
6 | 601892 | DECAL, THROWN OBJECTS | 1 |
7 | 786277 | DECAL, 60 DECK ID | 1 |
8 | 603092 | DECAL, VX4 TECHNOLOGY | 1 |
1. The deck includes decals and hardware.
1. Torque to 67–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 112933 | COVER, PULLEY RH 60" | 1 |
2 | 112934 | COVER, PULLEY LH 60" | 1 |
3 | 792002 | KNOB,5/16-18 X 3/4"MALE | 4 |
4 | 604494 | DECK BELT | 1 |
5 | 602891 | CHUTE, DISCHARGE LG | 1 |
6 | 602435 | SPRING, TORSION | 1 |
7 | 602432 | PIN, CHUTE | 1 |
8 | 086660 | NT .375-16NLG8 | 7 |
9 | 113563 | BACKING PLATE W/A | 1 |
10 | 602817 | RUBBER BUMPER | 1 |
11 | 079210 | FW 0.344X1.0X0.06 ZN | 2 |
12 | 064014 | CS .312-18X0.875HXG5 | 2 |
13 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
14 | 113180 | WALL, INNER ADJ RH 60" | 1 |
15 | 025395 | CB .375-16X 1.00 G5 ZN | 6 |
16 | 113179 | WALL, INNER ADJ LH 60" | 1 |
17 | 602771 | BLADE, F20.50" EHN-F-CW | 3 |
Not Shown | 793794 | BLADE,20.50"-L-F-CW | 3 |
Not Shown | 794214 | BLADE,20.50"-MUL-F-CW | 3 |
Not Shown | 794230 | BLADE,20.50"GAT-F-CW | 3 |
Not Shown | 794685 | BLADE, F20.50"-H-F-CW | 3 |
18 | 782474 | CW .678 X 2.250 X .187 | 3 |
19 | 781872 | CS .625-11X1.250HXG5 | 3 |
1. Torque to 118 ft-lbs.
2. Torque to 10 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 550750 | 66" SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 604221 | DECAL, DANGER / CHUTE | 1 |
4 | 781419 | DECAL, BELT ROUTING | 1 |
5 | 799189 | DECAL, Z 66" DECK ID | 1 |
6 | 603092 | DECAL, VX4 TECHNOLOGY | 1 |
7 | 601837 | DECAL, DECK DANGERS | 1 |
8 | 601892 | DECAL, THROWN OBJECTS | 1 |
1. The deck includes decals and hardware.
1. Torque to 67–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 113335 | COVER, PULLEY RH 66" | 1 |
2 | 113336 | COVER, PULLEY LH 66" | 1 |
3 | 792002 | KNOB,5/16-18 X 3/4"MALE | 4 |
4 | 602854 | DECK BELT | 1 |
5 | 602891 | CHUTE, DISCHARGE LG | 1 |
6 | 602435 | SPRING, TORSION | 1 |
7 | 602432 | PIN, CHUTE | 1 |
8 | 086660 | NT .375-16NLG8 | 7 |
9 | 113563 | BACKING PLATE W/A | 1 |
10 | 602817 | RUBBER BUMPER | 1 |
11 | 079210 | FW 0.344X1.0X0.06 ZN | 2 |
12 | 064014 | CS .312-18X0.875HXG5 | 2 |
13 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
14 | 025395 | CB .375-16X 1.00 G5 ZN | 6 |
15 | 113333 | WALL, ADJ INNER RH 66" | 1 |
16 | 113334 | WALL, ADJ INNER LH 66" | 1 |
17 | 602864 | BLADE, F22.50" EHN-F-CW | 3 |
Not Shown | 798496 | BLADE, F22.50"-H-F-CW | 3 |
Not Shown | 798512 | BLADE, 22.50"-GAT-F-CW | 3 |
Not Shown | 798504 | BLADE, 22.50"-MUL-F-CW | 3 |
18 | 782474 | CW .678 X 2.250 X .187 | 3 |
19 | 781872 | CS .625-11X1.250HXG5 | 3 |
1. Torque to 118 ft-lbs.
2. Torque to 10 ft-lbs.
3. Do not torque; the discharge chute must pivot freely.
Item | Part Number | Description | Qty Needed |
1 | 550751 | 72" SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 604221 | DECAL, DANGER / CHUTE | 1 |
4 | 781419 | DECAL, BELT ROUTING | 1 |
5 | 786285 | DECAL, 72 DECK ID | 1 |
6 | 603092 | DECAL, VX4 TECHNOLOGY | 1 |
7 | 601837 | DECAL, DECK DANGERS | 1 |
8 | 601892 | DECAL, THROWN OBJECTS | 1 |
1. The deck includes decals and hardware.
1. Torque to 67–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 112935 | COVER, PULLEY RH 72" | 1 |
2 | 112936 | COVER, PULLEY LH 72" | 1 |
3 | 792002 | KNOB,5/16-18 X 3/4"MALE | 4 |
4 | 784207 | DECK BELT | 1 |
5 | 602891 | CHUTE, DISCHARGE LG | 1 |
6 | 602435 | SPRING, TORSION | 1 |
7 | 602432 | PIN, CHUTE | 1 |
8 | 086660 | NT .375-16NLG8 | 7 |
9 | 113563 | BACKING PLATE W/A | 1 |
10 | 602817 | RUBBER BUMPER | 1 |
11 | 079210 | FW 0.344X1.0X0.06 ZN | 2 |
12 | 064014 | CS .312-18X0.875HXG5 | 2 |
13 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
14 | 025395 | CB .375-16X 1.00 G5 ZN | 6 |
15 | 112931 | WALL, ADJ INNER RH 72" | 1 |
16 | 112932 | WALL, ADJ INNER LH 72" | 1 |
17 | 602857 | BLADE, F24.50" EHN-F-CW | 3 |
Not Shown | 798702 | BLADE, F24.50"-H-F-CW | 3 |
Not Shown | 798710 | BLADE, 24.50"-MUL-F-CW | 3 |
Not Shown | 798728 | BLADE, 24.50"-GAT-F-CW | 3 |
18 | 782474 | CW .678 X 2.250 X .187 | 3 |
19 | 781872 | CS .625-11X1.250HXG5 | 3 |
1. Torque to 118 ft-lbs.
2. Torque to 10 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 550935 | 60" RD SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 603349 | DECAL, 2 BELT ROUTING | 1 |
4 | 601837 | DECAL, DECK DANGERS | 2 |
5 | 601892 | DECAL, THROWN OBJECTS | 2 |
6 | 603391 | DECAL, RUBBER FLAP | 2 |
7 | 786277 | DECAL, 60 DECK ID | 1 |
8 | 792887 | RIVET NUT,HX 5/16-18 TH | 1 |
1. The deck includes decals and hardware.
1. Torque to 65–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 058776 | NT .312-18NLG5 | 10 |
2 | 768523 | FW 0.343SAE | 10 |
3 | 015495 | GREASE FITTING STRAIGHT | 2 |
4 | 036244 | CS .375-16X1.00 HX G5 ZN | 6 |
5 | 767954 | FW 0.379X.82X.06 HD ZN | 12 |
6 | 113340 | PUSHER W/A, HZ/SZ | 1 |
7 | 778399 | FW .781X1.38X.25 ZN | 2 |
8 | 109482 | CHUTE BRACKET | 1 |
9 | 109483 | CHUTE BRACKET | 1 |
10 | 109487 | CLAMP ANGLE RS | 1 |
11 | 114440 | SHIELD, DUST 60" RD SZ | 1 |
12 | 109486 | CLAMP ANGLE LS | 1 |
13 | 601483 | SIDE FLAP, RUBBER | 2 |
14 | 086660 | NT .375-16NLG8 | 6 |
15 | 106716 | ANGLE, DISCHARGE CHUTE | 2 |
16 | 600254 | FLAP, RD REAR | 2 |
17 | 351676 | ANGLE, DECK STIFFENER | 2 |
18 | 037887 | CB .312-18X 1.000 FUL ZN | 6 |
19 | 016253 | CB .312-18X .750 FUL ZN | 4 |
20 | 114522 | STOP, REAR DECK W/A | 1 |
21 | 710194 | CB .375-16X 1.50 STD G5 | 6 |
1. Torque to 118 ft-lbs.
2. The RS pulley cover includes decals.
Item | Part Number | Description | Qty Needed |
1 | 551049 | 72" RD SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 603349 | DECAL, 2 BELT ROUTING | 1 |
4 | 601837 | DECAL, DECK DANGERS | 2 |
5 | 601892 | DECAL, THROWN OBJECTS | 2 |
6 | 603391 | DECAL, RUBBER FLAP | 2 |
7 | 786285 | DECAL, 72 DECK ID | 1 |
1. The deck includes decals and hardware.
1. Torque to 65–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 058776 | NT .312-18NLG5 | 10 |
2 | 768523 | FW 0.343SAE | 10 |
3 | 778399 | FW .781X1.38X.25 ZN | 2 |
4 | 109483 | CHUTE BRACKET | 1 |
5 | 109482 | CHUTE BRACKET | 1 |
6 | 036244 | CS .375-16X1.00 HX G5 ZN | 6 |
7 | 767954 | FW 0.379X.82X.06 HD ZN | 12 |
8 | 113340 | PUSHER W/A, HZ/SZ | 1 |
9 | 015495 | GREASE FITTING STRAIGHT | 2 |
10 | 109487 | CLAMP ANGLE RS | 1 |
11 | 601483 | SIDE FLAP, RUBBER | 2 |
12 | 037887 | CB .312-18X 1.000 FUL ZN | 6 |
13 | 109486 | CLAMP ANGLE LS | 1 |
14 | 016253 | CB .312-18X .750 FUL ZN | 4 |
15 | 114653 | SHIELD, DUST 72" SZ RD | 1 |
16 | 114522 | STOP, REAR DECK W/A | 1 |
17 | 086660 | NT .375-16NLG8 | 6 |
18 | 107712 | ANGLE, 72" DISCH CHUTE | 2 |
19 | 600930 | FLAP, RD REAR 72" | 2 |
20 | 101360 | ANGLE, DECK STIFFENER | 2 |
21 | 710194 | CB .375-16X 1.50 STD G5 | 6 |
1. Torque to 118 ft-lbs.
2. The RS pulley cover includes the decal.
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 603184 | DECK LIFT SPRING S/A | 2 |
5 | 055749 | CS .437-14X1.750HXG5 | 7 |
6 | 348391 | CHAIN, DECK LIFT | 4 |
7 | 704643 | NT .437-14FLKG5 | 16 |
8 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
9 | 781872 | CS .625-11X1.250HXG5 | 1 |
10 | 704783 | FW 0.625X1.500X0.105 | 1 |
11 | 348458 | YOKE W/A, DECK LEVELER | 1 |
12 | 034272 | NT .312-18HXG5 | 1 |
13 | 756270 | CS .312-18X1.500HXG5 | 1 |
14 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
15 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
16 | 061101 | NT .750-10 HX ZN NL GR B | 2 |
17 | 025296 | FW .760X1.63X0.08 ZN | 4 |
18 | 789115 | CS .750-10X3.500HXG5 | 2 |
Item | Part Number | Description | Qty Needed |
-- | 607407 | Spindle | 3 |
-- | 607408 | Spindle | 3 |
1 | 607477 | GREASE ZERK | 1 |
2 | 607478 | RELIEF FITTING | 1 |
3 | 607955 | BEARING | 2 |
Section 7: Seat & ROPS
1. Do not torque; the seat pan and seat pan stop must pivot freely.
2. The seat pan includes decals and installation kit.
3. The seat support and frame covers include decals.
Item | Part Number | Description | Qty Needed |
Not Shown | 605698 | SEAT, GRAMMER WO ISO | 1 |
1 | 605750 | CUSHION KIT, BACK, EXCEL | 1 |
2 | 604938 | ARMREST, RIGHT | 1 |
3 | 604937 | ARMREST, LEFT | 1 |
4 | 604941 | SEAT BELT | 1 |
5 | 605752 | CUSHION KIT, SEAT, EXCEL | 1 |
6 | 119287 | KIT, SLIDE | 1 |
7 | 604973 | KIT, SEAT SWITCH | 1 |
8 | 607248 | SVC, SEAT HANDLE KIT | 1 |
1. The slide kit includes left and right slides.
Item | Part Number | Description | Qty Needed |
1 | 605639 | S/C TO 608230 | 1 |
Not Shown | 608230 | SVC, ROPS ASSY | 1 |
2 | 605731 | KIT, POLY STOP (SET) | 2 |
3 | 605638 | ROPS HARDWARE KIT | 1 |
4 | 061812 | CS .500-13X3.50 HX G5 ZN | 4 |
5 | 767962 | FW .531 x 1.063 x .175 | 8 |
6 | 023317 | NT .500-13UNTG8 | 4 |
1. Torque to 73 ft-lbs.