Hustler X-One Parts (932715, 932723, 932731, 932749, 932756, 932764, 932772, 932780, 932798, 933317US, 933887US, 933895US, 933978US, 933986US, 933994US, 934117, 934125, 934133, 934141, 934158, 934166 & 934174) 2014-2016
All Hustler Parts Diagrams |
Welcome to the Hustler X-One parts lookup page. All parts are OEM replacement parts from the Hustler Turf Warehouse in Heston, Kansas. This section is for the following Hustler X-One model numbers:
932715, 932723, 932731, 932749, 932756, 932764, 932772, 932780, 932798, 933317US, 933887US, 933895US, 933978US, 933986US, 933994US, 934117, 934125, 934133, 934141, 934158, 934166 & 934174
All parts listed below are available and ship same day if in stock. If the parts are not in stock, lead time is 3 days. If you have any questions or would like help with parts lookup, give us a call and we will be happy to help!
410-692-5170
Section 1: Frame & Engine Guard
Item | Part Number | Description | Qty Needed |
1 | 552162 | SERVICE FRAME, 48" X1 | 1 |
-- | 552163 | SERVICE FRAME, 54" X1 | 1 |
-- | 552164 | SERVICE FRAME, 60" X1 | 1 |
-- | 552165 | SERVICE FRAME, 54" X1 RD | 1 |
-- | 552166 | SERVICE FRAME, 60" X1 RD | 1 |
2 | 781427 | DECAL, DECK HEIGHT INDI | 1 |
3 | 808477 | RIVET NUT, 1/4-20 THREA | 2 |
4 | N/A | SERIAL NO. / SPEC DECAL | 3 |
5 | 601993 | DECAL, SAFE OPERATION | 1 |
6 | 808493 | RIVET NUT, 3/8-16 THREA | 4 |
7 | 600961 | RIVET NUT, 1/2-13 THREAD | 4 |
8 | 602041 | DECAL, HOT | 2 |
9 | 602407 | DECAL, HUSTLER ID | 1 |
1. In the event the serial number tag becomes damaged or illegible, please contact your dealer to order a replacement.
2. EPA compliance decal.
3. Patent numbers decal.
4. The frames include decals and rivet nuts.
Item | Part Number | Description | Qty Needed |
1 | 552757 | SVC, ENGINE GUARD X1 | 1 |
2 | 604352 | DECAL, H LOGO | 1 |
3 | 086660 | NT .375-16NLG8 | 4 |
4 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
5 | 767962 | FW .531 x 1.063 x .175 | 8 |
6 | 705954 | CS .500-13X1.25 HX G5 ZN | 4 |
7 | 602345 | SPACER, ANTI-SCALP 3.22 | 2 |
8 | 602263 | WHEEL, ANTI-SCALP | 2 |
9 | 377994 | HEAT SHIELD, MMZ ROLLER | 2 |
10 | 068239 | CS .500-13X4.500HXG5 | 2 |
11 | 008193 | NT .500-13HXG5 | 2 |
12 | 118936 | HITCH, X1 | 1 |
13 | 025395 | CB .375-16X 1.00 G5 ZN | 4 |
1. The engine guard (552757) includes the decal.
Item | Part Number | Description | Qty Needed |
1 | 553053 | SVC, ENGINE GUARD X1 | 1 |
2 | 604352 | DECAL, H LOGO | 1 |
3 | 121375 | HITCH PLT | 1 |
4 | 025395 | CB .375-16X 1.00 G5 ZN | 4 |
5 | 121554 | MUFFLER SHIELD X-1 | 1 |
6 | 016899 | NT .375-16 FLKG5 | 4 |
7 | 602263 | WHEEL, ANTI-SCALP | 2 |
8 | 068239 | CS .500-13X4.500HXG5 | 2 |
9 | 767962 | FW .531 x 1.063 x .175 | 8 |
10 | 377994 | HEAT SHIELD, MMZ ROLLER | 1 |
11 | 008193 | NT .500-13HXG5 | 2 |
12 | 602345 | SPACER, ANTI-SCALP 3.22 | 2 |
13 | 705954 | CS .500-13X1.25 HX G5 ZN | 4 |
1. The engine guard (553053) includes the decal.
Item | Part Number | Description | Qty Needed |
1 | 113858 | DEFLECTOR, HEAT | 1 |
2 | 068239 | CS .500-13X4.500HXG5 | 2 |
3 | 767962 | FW .531 x 1.063 x .175 | 8 |
4 | 781567 | NT .500-13NLG5 | 2 |
5 | 602345 | SPACER, ANTI-SCALP 3.22 | 2 |
6 | 602263 | WHEEL, ANTI-SCALP | 2 |
7 | 113704 | HEAT SHIELD W/A, SMALL | 1 |
8 | 603076 | SPACER, MUFFLER SHIELD | 4 |
9 | 601069 | CN .312-18x.200 MAX THK | 6 |
10 | 113371 | ENGINE GUARD SMALL, RS | 1 |
11 | 551168 | CENTER BUMPER SVC PART | 1 |
12 | 113372 | ENGINE GUARD SMALL, LS | 1 |
13 | 036244 | CS .375-16X1.00 HX G5 ZN | 4 |
14 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
15 | 808493 | RIVET NUT, 3/8-16 THREA | 4 |
16 | 079186 | CS .312-18X1.250HXG5 | 4 |
17 | 768523 | FW 0.343SAE | 6 |
18 | 705954 | CS .500-13X1.25 HX G5 ZN | 4 |
19 | 064014 | CS .312-18X0.875HXG5 | 2 |
20 | 113964 | CABLE SHIELD | 1 |
21 | 601982 | CN .250-20X .150 MAX THK | 2 |
22 | 768515 | FW 0.281SAE | 2 |
23 | 064329 | CS .250-20X0.625HXG5 | 2 |
Item | Part Number | Description | Qty Needed |
1 | 601908 | DECAL, SPARK ARRESTOR | 1 |
2 | 603363 | DECAL, ANSI COMPLIANCE | 1 |
Section 2: Hydraulic System, Drive Belt, Clutch, Steering & Brake
Item | Part Number | Description | Qty Needed |
1 | -- | REFER TO "HYDRAULIC RESERVOIR ASSEMBLY BREAKDOWN" | 1 |
2 | 056069 | CS .375-16X0.63 HX G5 ZN | 1 |
3 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
4 | 036244 | CS .375-16X1.00 HX G5 ZN | 2 |
5 | 601571 | VIBRATION MOUNT | 1 |
6 | -- | REFER TO "LS PUMP ASSEMBLY BREAKDOWN" | 1 |
7 | -- | REFER TO "RS PUMP ASSEMBLY BREAKDOWN" | 1 |
8 | 041707 | NT .437-14HXG5 | 4 |
9 | 704742 | FW 0.453X.81X.06 ZN | 8 |
10 | 054502 | NT .375-16HXG5 | 3 |
11 | -- | REFER TO "HYDRAULIC MOTOR ASSEMBLY BREAKDOWN" | 2 |
12 | 023317 | NT .500-13UNTG8 | 8 |
13 | 767962 | FW .531 x 1.063 x .175 | 8 |
14 | 602256 | CS .500-13X2.500 SQ G5 | 8 |
15 | 705186 | CS .437-14X1.375HXG5 | 4 |
16 | 603015 | TUBE, LP-TM LT LOOP | 1 |
17 | 603016 | TUBE, RP-BM LT LOOP | 1 |
18 | 603013 | TUBE, RP-BM RT LOOP | 1 |
19 | 603014 | TUBE, RP-TM RT LOOP | 1 |
Item | Part Number | Description | Qty Needed |
1 | 032763 | CAP, BREATHER | 1 |
2 | 032771 | STRAINER | 1 |
3 | 602896 | RESERVOIR, HYDRO | 1 |
4 | 601413X | FILTER ELEMENT | 1 |
5 | 602994 | LH PUMP RETURN HOSE | 1 |
6 | 602995 | RH PUMP RETURN HOSE | 1 |
7 | 602993 | RH PUMP SUCTION HOSE | 1 |
8 | 781658 | FTG, -8MORB/HEX PLUG | 1 |
Item | Part Number | Description | Qty Needed |
1 | 781542 | FTG, 90°-8MORB/-8MORFS | 1 |
2 | 008581 | CS .250-20X1.500HXG5 | 2 |
3 | 768515 | FW 0.281SAE | 2 |
4 | 603200 | PUMP ARM, X1 | 2 |
5 | 068551 | NT .250-20 HXZY NL | 2 |
6 | 784108 | FTG, 45°-6MORB/-6BT | 2 |
7 | 601133 | PUMP, HYD 12CC W/ FAN | 12 |
8 | 602992 | HOSE, LEFT PUMP SUCTION | 4 |
Item | Part Number | Description | Qty Needed |
1 | 600881 | FTG, STR-6MORB/-6FORB | 1 |
2 | 787465 | FTG, 90°-6MORB/-6BT | 1 |
3 | 008581 | CS .250-20X1.500HXG5 | 1 |
4 | 768515 | FW 0.281SAE | 1 |
5 | 603200 | PUMP ARM, X1 | 1 |
6 | 068551 | NT .250-20 HXZY NL | 1 |
7 | 781542 | FTG, 90°-8MORB/-8MORFS | 2 |
8 | 784108 | FTG, 45°-6MORB/-6BT | 1 |
9 | 601134 | PUMP, HYD 12CC W/ FAN | 1 |
Item | Part Number | Description | Qty Needed |
1 | 601877 | FAN SHROUD, PUMP PJ | 1 |
2 | 601878 | FAN KIT, PUMP PJ | 1 |
3 | 601879 | BRACKET, PJ PUMP SHROUD | 1 |
4 | 780718 | SEAL KIT, PG/PJ PUMPS | 1 |
Item | Part Number | Description | Qty Needed |
1 | 781526 | FTG, 90°-10MORB/-8MORFS | 2 |
2 | 602382 | MOTOR, TF0240 PARKER | 1 |
3 | 064337 | ROSS WOODRUFF KEY | 1 |
4 | 065516 | ROSS NUT | 1 |
5 | 748806 | ROSS VITON SEAL KIT | 1 |
Item | Part Number | Description | Qty Needed |
1 | N/A | STEERING COVER ASSEMBLY | 1 |
2 | 601087 | SWITCH, PLUNGER N.O. | 2 |
3 | 795351 | DAMPER, CENTERING | 2 |
4 | 109839 | HANDLE, Z W/A | 2 |
Not Shown | 781260 | GRIP, STEERING BAR | 1 |
5 | 767954 | FW 0.379X.82X.06 HD ZN | 12 |
6 | 036244 | CS .375-16X1.00 HX G5 ZN | 4 |
7 | 055822 | CS .375-16X0.75 HX G5 ZN | 4 |
8 | 054502 | NT .375-16HXG5 | 4 |
9 | 781922 | BALL STUD | 2 |
10 | 768523 | FW 0.343SAE | 6 |
11 | 029876 | LW .312 INTEXT ZN | 2 |
12 | 016832 | NT .312-18FLKG5 | 2 |
13 | 023655 | NT 0.312-24 NL G8 | 2 |
14 | 601426 | CAP LOCK | 1 |
Item | Part Number | Description | Qty Needed |
1 | 604298 | STEERING BOX SUB, LH | 1 |
2 | 604297 | STEERING BOX SUB, RH | 1 |
3 | 023655 | NT 0.312-24 NL G8 | 2 |
4 | 768523 | FW 0.343SAE | 6 |
5 | 034272 | NT .312-18HXG5 | 2 |
6 | 712927 | FW 0.344X1.00X.12 HD ZN | 2 |
7 | 781922 | BALL STUD | 2 |
8 | 781286 | PUMP ROD ADJUSTER ASSY | 2 |
9 | 550744 | STEERING COVER, SERVICE | 1 |
10 | 608000 | BUSHING | 2 |
11 | 603078 | FW .750X1.50X.16 ZN | 2 |
12 | 784439 | LOCK COLLAR,0.757 ID(FS) | 2 |
13 | 113365 | STEER PIVOT TUBE | 1 |
14 | 053199 | NT .500-13JAMG5 | 2 |
15 | 603055 | SS .500-13X 2.50 SH ZN | 2 |
16 | 605087 | DECAL, X-ONE | 1 |
17 | 722199P | POLYURETHANE 2" FS - 1 FT | 1 |
18 | 080358 | GM .50X1.00X.75X.12 | 1 |
Item | Part Number | Description | Qty Needed |
1 | 607151 | STEERING ARM W/A | 1 |
2 | 086660 | NT .375-16NLG8 | 3 |
3 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
4 | 705178 | CS .375-16X1.750HXG5 | 3 |
5 | 112899 | STEERING BOX W/A LH | 1 |
Not Shown | 112898 | STEERING BOX W/A RH | 1 |
6 | 608000 | BUSHING | 2 |
7 | 348862 | STEER LEVER BUSHING (PLA | 2 |
8 | 047456 | GM .750X.188X1.00X.12 | 1 |
9 | 797738 | SS .500-13X2.000SH | 1 |
1. Torque all hardware to 33 ft-lbs ± 10%.
Item | Part Number | Description | Qty Needed |
1 | 051151 | CS .500-13X5.000HXG5 | 1 |
2 | 344267 | FW .510X2.15X.19 ZN | 1 |
3 | 034272 | NT .312-18HXG5 | 2 |
4 | 768523 | FW 0.343SAE | 4 |
5 | 113347 | CLUTCH ANCHOR | 1 |
6 | 036236 | CS .312-18X1.000HXG5 | 2 |
7 | 212076 | KEY 1/4 SQ X 1.50 LG(FS) | 1 |
8 | 602903 | PULLEY 6.35 OPx1.125SHFT | 1 |
9 | 601311K | CLUTCH KIT | 1 |
10 | 791251 | HARNESS, CLUTCH PIGTAIL | 1 |
11 | 602680 | FW .453X1.12X.12 HRD ZN | 1 |
12 | 785659 | CS .437-20X2.50 HXG5 P85 | 1 |
13 | 602904 | PULLEY 6.35 OPx0.592SHFT | 2 |
14 | 083196 | SS .312-18X0.750SQ | 4 |
15 | 768127 | KEY 5mm x30mm RADIUS EN | 2 |
16 | 602880 | BUSHING, IDLER PIVOT | 1 |
17 | 025007 | CS .62511X1.750HXG5 | 1 |
18 | 604858 | DRIVE BELT | 1 |
19 | 115536 | S/C TO 608005 | 1 |
Not Shown | 608005 | TENSIONER CAST | 1 |
20 | 601016 | IDLER SPRING | 1 |
21 | 601486 | EB, .375-16X3.00 FULTHD | 1 |
22 | 054502 | NT .375-16HXG5 | 2 |
23 | 767954 | FW 0.379X.82X.06 HD ZN | 2 |
24 | 015495 | GREASE FITTING STRAIGHT | 1 |
25 | 602879 | BUSHING, IDLER PIVOT | 1 |
26 | 767962 | FW .531 x 1.063 x .175 | 1 |
27 | 781567 | NT .500-13NLG5 | 1 |
28 | 604827 | PULLEY, 5" OD FLAT | 1 |
29 | 000331 | WIRE TIE, SMALL/SHORT | 2 |
1. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.
2. Torque to 12–15 ft-lbs
Item | Part Number | Description | Qty Needed |
1 | 051151 | CS .500-13X5.000HXG5 | 1 |
2 | 344267 | FW .510X2.15X.19 ZN | 1 |
3 | 034272 | NT .312-18HXG5 | 2 |
4 | 768523 | FW 0.343SAE | 4 |
5 | 113347 | CLUTCH ANCHOR | 1 |
6 | 036236 | CS .312-18X1.000HXG5 | 2 |
7 | 212076 | KEY 1/4 SQ X 1.50 LG(FS) | 1 |
8 | 602903 | PULLEY 6.35 OPx1.125SHFT | 1 |
9 | 601311K | CLUTCH KIT | 1 |
10 | 791251 | HARNESS, CLUTCH PIGTAIL | 1 |
11 | 602680 | FW .453X1.12X.12 HRD ZN | 1 |
12 | 785659 | CS .437-20X2.50 HXG5 P85 | 1 |
13 | 602904 | PULLEY 6.35 OPx0.592SHFT | 2 |
14 | 083196 | SS .312-18X0.750SQ | 4 |
15 | 768127 | KEY 5mm x30mm RADIUS EN | 2 |
16 | 602880 | BUSHING, IDLER PIVOT | 1 |
17 | 025007 | CS .62511X1.750HXG5 | 1 |
18 | 602304 | PULLEY, 5" FLAT IDLER | 1 |
19 | 113403 | TENSIONER | 1 |
20 | 601016 | IDLER SPRING | 1 |
21 | 601486 | EB, .375-16X3.00 FULTHD | 1 |
22 | 054502 | NT .375-16HXG5 | 2 |
23 | 767954 | FW 0.379X.82X.06 HD ZN | 2 |
24 | 015495 | GREASE FITTING STRAIGHT | 1 |
25 | 602879 | BUSHING, IDLER PIVOT | 1 |
26 | 767962 | FW .531 x 1.063 x .175 | 1 |
27 | 781567 | NT .500-13NLG5 | 1 |
28 | 602907 | DRIVE BELT | 1 |
1. Torque to 45–48 ft-lbs. Do not reuse the fastener if it is loosened or removed. Replace it with a new fastener. Use only hand tools to install this fastener.
2. Torque to 12–15 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 086660 | NT .375-16NLG8 | 2 |
2 | 767954 | FW 0.379X.82X.06 HD ZN | 12 |
3 | 765339 | BUSHING,IGUS#0608 (FS) | 4 |
4 | 023655 | NT 0.312-24 NL G8 | 4 |
5 | 768523 | FW 0.343SAE | 12 |
6 | 781583 | BRAKE ROD ASSEMBLY | 2 |
7 | 113215 | BRAKE BELLCRANK, RS | 1 |
8 | 113216 | BRAKE BELLCRANK, LS | 1 |
9 | 054502 | NT .375-16HXG5 | 4 |
10 | 080655 | CS .375-16X1.500HXG5 | 2 |
11 | 052514 | CS .375-16X4.500HXG5 | 2 |
12 | 350397 | BRAKE LINK TURNBUCKLE A | 2 |
13 | 034272 | NT .312-18HXG5 | 4 |
14 | 602383 | BRAKE ASSY, PARKER | 2 |
15 | 602384 | HUB ASSY, PARKER | 2 |
16 | 111309 | BRAKE ARM,Z4 | 2 |
17 | 604461 | CS .312-18X.75HXG8 FL | 8 |
18 | 005116 | CS .375-16X1.38 HX G5 ZN | 2 |
19 | 037887 | CB .312-18X 1.000 FUL ZN | 4 |
20 | 606124 | STUD 1/2-20 X 1 1/2" | 5 |
Section 3: Wheels & Tires
Item | Part Number | Description | Qty Needed |
1 | 705954 | CS .500-13X1.25 HX G5 ZN | 2 |
2 | 344267 | FW .510X2.15X.19 ZN | 2 |
3 | 712976 | FW 0.531X1.38X.12 ZN | 2 |
4 | 784223 | BEARING | 4 |
5 | 784603 | SPACER | 2 |
6 | 782078 | TIR/WHL 24X9.50-12 SLV | 2 |
7 | 061077 | WHEEL NUT | 10 |
8 | -- | REFER TO "FRONT WHEEL ASSEMBLY BREAKDOWN" | 1 |
1. Torque to 65–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 705954 | CS .500-13X1.25 HX G5 ZN | 2 |
2 | 344267 | FW .510X2.15X.19 ZN | 2 |
3 | 712976 | FW 0.531X1.38X.12 ZN | 2 |
4 | 784223 | BEARING | 4 |
5 | 784603 | SPACER | 2 |
6 | 784058 | TIR/WHL 24X12.00-12 SLV | 2 |
7 | 061077 | WHEEL NUT | 10 |
8 | -- | REFER TO "FRONT WHEEL ASSEMBLY BREAKDOWN" | 1 |
1. Torque to 65–75 ft-lbs
Item | Part Number | Description | Qty Needed |
1 | 602870 | FORK W/A | 1 |
2 | 041475 | CS .750-10X9.50 HX G5 ZN | 1 |
3 | 025296 | FW .760X1.63X0.08 ZN | 2 |
4 | 061101 | NT .750-10 HX ZN NL GR B | 1 |
5 | 606744 | TIR/WHL 13X6.50-6 SLV | 1 |
6 | 604843 | TIR 13X6.50-6 B4R SMTH | 1 |
Not Shown | 607734 | TIR 13X6.50-6 B4R RIB | 1 |
Not Shown | 747741 | TIR 13X6.50-6 B4R RIB | 1 |
7 | 606751 | WHL 6X4.50 SLV | 1 |
8 | 782771 | SPACER, BEARING (SERV P | 1 |
9 | 039677 | WHEEL BEARING | 2 |
Item | Part Number | Description | Qty Needed |
1 | 782284 | TIR 24X9.50-12 B4R LTFT | 1 |
2 | 606821 | WHL 12X7.00 5X4.5 SLV | 1 |
3 | 019521 | TIRE VALVE TR-412 GOODY | 1 |
Item | Part Number | Description | Qty Needed |
1 | 781245 | S/C TO 606967 | 1 |
2 | 606819 | WHL 12X8.50 5X4.5 SLV | 1 |
3 | 019521 | TIRE VALVE TR-412 GOODY | 1 |
Section 4: Engine, Muffler & Fuel System
Item | Part Number | Description | Qty Needed |
1 | -- | ENGINE, VAN M49 | 1 |
2 | 034272 | NT .312-18HXG5 | 2 |
3 | 768523 | FW 0.343SAE | 4 |
4 | 744284 | BATTERY CABLE NEGATIVE | 1 |
5 | 029876 | LW .312 INTEXT ZN | 1 |
6 | 789131 | CAP, HUSTLRZ FAN CON(FS) | 1 |
7 | 000331 | WIRE TIE, SMALL/SHORT | 3 |
8 | 121771 | GROUND STRAP | 1 |
9 | 756270 | CS .312-18X1.500HXG5 | 1 |
10 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
11 | 605814 | SC0.375-16X1.250FLG | 4 |
12 | 605059 | BATTERY CABLE, POSITIVE | 1 |
13 | 788943 | AIR FILTER INDICATOR | 1 |
14 | 601216 | FTG, ELBOW, STREET | 1 |
15 | 605494 | MUFFLER, M49 EFI | 1 |
16 | 603326P | VAPOR LINE, 3/16" - 7 FT | 1 |
17 | 000323 | CLIP, HOSE CLAMP | 2 |
18 | 015818P | FUEL LINE, 1/4" - 6 FT | 1 |
FUEL & VAPOR LINE LENGTHS
A: 4" fuel line from the fuel valve to the engine
B: 24" vapor line from the vapor tee to the engine
1. Supplied with the engine.
2. Part of the wire harness.
3. Torque to 30 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.
4. Torque to 17.5 ft-lbs ± 1.8 ft-lbs.
5. Part of the Fuel Assembly.
Item | Part Number | Description | Qty Needed |
1 | 785261 | AIR FILTER - MAIN | 1 |
2 | 785279 | AIR FILTER - SAFETY | 1 |
3 | 603196 | ENGINE OIL FILTER | 1 |
5 | 605763 | FUEL FILTER, VAN M49 810 | 1 |
Item | Part Number | Description | Qty Needed |
1 | 603807 | CAP, 3.5" RATCHETING GAS | 2 |
2 | 605107 | TANK, FENDER, R.H. | 1 |
3 | 605108 | TANK, FENDER, L.H. | 1 |
4 | 000323 | CLIP, HOSE CLAMP | 4 |
5 | 015818P | FUEL LINE, 1/4" - 6 FT | 59" |
6 | 745059 | FUEL VALVE 3-WAY | 1 |
7 | 712919 | FW 0.406X1.00X.12 HD ZN | 10 |
8 | 055822 | CS .375-16X0.75 HX G5 ZN | 10 |
9 | 036236 | CS .312-18X1.000HXG5 | 9 |
10 | 768523 | FW 0.343SAE | 9 |
11 | 120438 | X1 HOSE BRACKET | 1 |
12 | 045088 | HOSE CLAMP 1" (FS) | 2 |
13 | 043570 | CLIP - HOSE - SINGLE(FS) | 2 |
16 | 016832 | NT .312-18FLKG5 | 5 |
17 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
18 | 768515 | FW 0.281SAE | 8 |
19 | 116228 | COVER, FRONT | 1 |
20 | 055939 | CS .250-20X0.75 HX G5 ZN | 4 |
21 | 604314 | CARBON CANISTER, 9 GAL | 2 |
22 | 120132 | PLATE, CANISTER | 2 |
23 | 601982 | CN .250-20X .150 MAX THK | 4 |
24 | 601069 | CN .312-18x.200 MAX THK | 4 |
25 | 604281 | TEE, 3/16" PLASTIC | 1 |
26 | 603326P | VAPOR LINE, 3/16" - 7 FT | 92" |
27 | 000331 | WIRE TIE, SMALL/SHORT | 2 |
28 | 603161 | VACUUM BREAKER FILTER | 1 |
FUEL & VAPOR LINE LENGTHS
A: 19" fuel line from the right tank to the fuel valve
B: 40" fuel line from the left tank to the fuel valve
C: 38" vapor line from the right tank to the LS carbon canister
D: 8" vapor line from the RS carbon canister to the vapor tee
E: 8" vapor line from the LS carbon canister to the vapor tee
F: 38" vapor line from the left tank to the RS carbon canister
1. Torque to 16 ft-lbs.
2. Part of the wire harness.
Item | Part Number | Description | Qty Needed |
1 | -- | KAWASAKI FX691V ENGINE | 1 |
Not Shown | -- | KAWASAKI FX730V ENGINE | 1 |
Not Shown | -- | ENGINE, KAW FX850V | 1 |
2 | 789131 | CAP, HUSTLRZ FAN CON(FS) | 1 |
3 | 000331 | WIRE TIE, SMALL/SHORT | 4 |
4 | 029876 | LW .312 INTEXT ZN | 1 |
5 | 744284 | BATTERY CABLE NEGATIVE | 1 |
6 | 768523 | FW 0.343SAE | 1 |
7 | 720516 | CS M8-1.25X16HX FL10.9 | 1 |
8 | 604430 | WIRE HARNESS | 1 |
9 | 605059 | BATTERY CABLE, POSITIVE | 1 |
10 | 788943 | AIR FILTER INDICATOR | 1 |
11 | 601216 | FTG, ELBOW, STREET | 1 |
12 | 608006 | MUFFLER, 726CC KAW | 1 |
REF | 603012 | MUFFLER, FX850V | 1 |
13 | 796524 | VALVE,OIL DRAIN M20x2.5 | 1 |
14 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
15 | 602580 | CS .375-16X1.25HXG8ZYP85 | 4 |
16 | 000323 | CLIP, HOSE CLAMP | 2 |
17 | 015818P | FUEL LINE, 1/4" - 6 FT | 14" |
18 | 603326P | VAPOR LINE, 3/16" - 7 FT | 35" |
19 | 603112 | CLAMP, 3/16 FUEL | 1 |
FUEL & VAPOR LINE LENGTHS
A: 14" fuel line from the fuel valve to the engine
B: 35" vapor line from the vapor tee to the engine
1. Supplied with the engine.
2. Part of the wire harness.
3. Torque to 30 ft-lbs. Replace (do not reuse) the cap screw if it’s removed or loosened. Use only hand tools to install this fastener.
4. Torque to 17 ft-lbs.
5. 608006 is used with FX691V & FX730V engines. 603012 is used with FX850V engines.
Item | Part Number | Description | Qty Needed |
1 | -- | ENGINE, KAW FX801V | 1 |
2 | 789131 | CAP, HUSTLRZ FAN CON(FS) | 1 |
3 | 000331 | WIRE TIE, SMALL/SHORT | 4 |
4 | 029876 | LW .312 INTEXT ZN | 1 |
5 | 744284 | BATTERY CABLE NEGATIVE | 1 |
6 | 768523 | FW 0.343SAE | 2 |
7 | 720516 | CS M8-1.25X16HX FL10.9 | 1 |
8 | 605059 | BATTERY CABLE, POSITIVE | 1 |
9 | 788943 | AIR FILTER INDICATOR | 1 |
10 | 601216 | FTG, ELBOW, STREET | 1 |
11 | 603012 | MUFFLER, FX850V | 1 |
12 | 016832 | NT .312-18FLKG5 | 1 |
13 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
14 | 036236 | CS .312-18X1.000HXG5 | 1 |
15 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
16 | 602580 | CS .375-16X1.25HXG8ZYP85 | 4 |
17 | 796524 | VALVE,OIL DRAIN M20x2.5 | 1 |
18 | 000323 | CLIP, HOSE CLAMP | 2 |
19 | 015818P | FUEL LINE, 1/4" - 6 FT | 14" |
20 | 603326P | VAPOR LINE, 3/16" - 7 FT | 43" |
21 | 603112 | CLAMP, 3/16 FUEL | 1 |
FUEL & VAPOR LINE LENGTHS
A: 14" fuel line from the fuel valve to the engine
B: 43" vapor line from the vapor tee to the engine
1. Supplied with the engine.
2. Part of the wire harness.
3. Torque to 30 ft-lbs. Replace (do not reuse) the cap screw if it’s removed or loosened. Use only hand tools to install this fastener.
4. Torque to 17 ft-lbs.
5. 603012 (muffler) is used with both FX801V and FX850V engines.
Item | Part Number | Description | Qty Needed |
1 | 785261 | AIR FILTER - MAIN | 1 |
2 | 785279 | AIR FILTER - SAFETY | 1 |
3 | 763318 | VALVE, VACUATOR | 1 |
4 | 068478 | FUEL FILTER - IN LINE | 1 |
5 | 602581 | ENGINE OIL FILTER | 1 |
Item | Part Number | Description | Qty Needed |
1 | 603807 | CAP, 3.5" RATCHETING GAS | 2 |
2 | 605107 | TANK, FENDER, R.H. | 1 |
3 | 605108 | TANK, FENDER, L.H. | 1 |
4 | 000323 | CLIP, HOSE CLAMP | 4 |
5 | 015818P | FUEL LINE, 1/4" - 6 FT | 59" |
6 | 745059 | FUEL VALVE 3-WAY | 1 |
7 | 603326P | VAPOR LINE, 3/16" - 7 FT | 58" |
8 | 604305 | VACUUM BREAKER | 1 |
9 | 604281 | TEE, 3/16" PLASTIC | 1 |
10 | 712919 | FW 0.406X1.00X.12 HD ZN | 10 |
11 | 055822 | CS .375-16X0.75 HX G5 ZN | 10 |
12 | 036236 | CS .312-18X1.000HXG5 | 3 |
13 | 768523 | FW 0.343SAE | 3 |
14 | 043570 | CLIP - HOSE - SINGLE(FS) | 3 |
15 | 016832 | NT .312-18FLKG5 | 3 |
16 | 116229 | COVER, REAR | 1 |
17 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
18 | 768515 | FW 0.281SAE | 4 |
19 | 116228 | COVER, FRONT | 1 |
1. Torque to 16 ft-lbs.
A: 21" vapor line from the right tank to the vacuum breaker
B: 8" vapor line from the vapor tee to the vacuum breaker
C: 29" vapor line from the left tank to the vapor tee
D: 40" fuel line from the right tank to the fuel valve
E: 19" fuel line from the left tank to the fuel valve
Item | Part Number | Description | Qty Needed |
1 | 603807 | CAP, 3.5" RATCHETING GAS | 2 |
2 | 605107 | TANK, FENDER, R.H. | 1 |
3 | 605108 | TANK, FENDER, L.H. | 1 |
4 | 000323 | CLIP, HOSE CLAMP | 4 |
5 | 015818P | FUEL LINE, 1/4" - 6 FT | 59" |
6 | 000331 | WIRE TIE, SMALL/SHORT | 2 |
7 | 745059 | FUEL VALVE 3-WAY | 1 |
8 | 712919 | FW 0.406X1.00X.12 HD ZN | 10 |
9 | 055822 | CS .375-16X0.75 HX G5 ZN | 10 |
10 | 036236 | CS .312-18X1.000HXG5 | 9 |
11 | 768523 | FW 0.343SAE | 9 |
12 | 120438 | X1 HOSE BRACKET | 1 |
13 | 045088 | HOSE CLAMP 1" (FS) | 2 |
14 | 043570 | CLIP - HOSE - SINGLE(FS) | 2 |
15 | 016832 | NT .312-18FLKG5 | 5 |
16 | 794644 | GM 1.50 X 2.12 X 1.75 | 1 |
17 | 116229 | COVER, REAR | 1 |
18 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
19 | 768515 | FW 0.281SAE | 8 |
20 | 116228 | COVER, FRONT | 1 |
21 | 055939 | CS .250-20X0.75 HX G5 ZN | 4 |
22 | 604314 | CARBON CANISTER, 9 GAL | 2 |
23 | 120132 | PLATE, CANISTER | 2 |
24 | 601982 | CN .250-20X .150 MAX THK | 4 |
25 | 601069 | CN .312-18x.200 MAX THK | 4 |
26 | 604281 | TEE, 3/16" PLASTIC | 1 |
27 | 603326P | VAPOR LINE, 3/16" - 7 FT | 92" |
28 | 603161 | VACUUM BREAKER FILTER | 1 |
FUEL LINE LENGTHS
A: 40" fuel line from the right tank to the fuel valve
B: 19" fuel line from the left tank to the fuel valve
C: 38" vapor line from the right tank to the LS carbon canister
D: 8" vapor line from the RS carbon canister to the vapor tee
E: 8" vapor line from the LS carbon canister to the vapor tee
F: 38" vapor line from the left tank to the RS carbon canister
1. Torque to 16 ft-lbs.
2. Part of the wire harness.
Item | Part Number | Description | Qty Needed |
1 | 603888K | SVC KIT, FUEL SENDER | 1 |
Not Shown | 608041 | SVC KIT, FUEL SENDER | 1 |
2 | 605648K | TANK GROMMET SVC KIT | 1 |
3 | 604287K | VENT FITTING SVC KIT | 1 |
4 | 604200K | GROMMET SVC KIT | 2 |
5 | 605159K | SUCTION HOSE SVC KIT | 1 |
Item | Part Number | Description | Qty Needed |
1 | 603161 | VACUUM BREAKER FILTER | 1 |
Section 5: Instrument Panel, Wire Harness & Battery
Item | Part Number | Description | Qty Needed |
1 | 603748 | FUEL DISPLAY/HOUR METER | 1 |
2 | 785808 | KEY ASSEMBLY | 1 |
3 | 045898 | IGNITION SWITCH | 1 |
4 | 603523 | KNOB | 1 |
5 | 712257 | INDICATOR LIGHT, RED(FS) | 2 |
6 | 601098 | CB 10-24 X .500 ZYNC | 2 |
7 | 776476 | SWITCH, PTO 6201-321 | 1 |
8 | 604373 | RELAY CONTROL MODULE | 1 |
9 | 059832 | NT #10-24 HX NL ZN | 4 |
10 | 063198 | CS #10-24X0.750FLKG5 | 2 |
11 | 605836 | CABLE, THROTTLE 50" | 1 |
12 | 704932 | FW 0.219X.50X.05 ZN | 2 |
13 | 000430 | WIRE TIE, SMALL/LONG | 1 |
14 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
15 | 768515 | FW 0.281SAE | 4 |
16 | 605767 | DECAL, INST PANEL | 1 |
17 | 553119 | SVC PART, INST PANEL | 1 |
18 | 034280 | CS .312-18X0.750HXG5 | 1 |
19 | 768523 | FW 0.343SAE | 2 |
20 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
21 | 034272 | NT .312-18HXG5 | 1 |
22 | 000331 | WIRE TIE, SMALL/SHORT | 8 |
23 | 605456 | WIRE HARNESS, BRIGGS DFI | 1 |
24 | 114052 | KIT, CLUTCH CONN. REP | 1 |
25 | 604430 | WIRE HARNESS | 1 |
26 | 601047 | HOLDER, FUSE | 1 |
1. Part of the wire harness.
2. The instrument panel includes the decal
Item | Part Number | Description | Qty Needed |
1 | 606068 | GAUGE, FUEL/HOURMETER | 1 |
2 | 785808 | KEY ASSEMBLY | 1 |
3 | 045898 | IGNITION SWITCH | 1 |
4 | 603523 | KNOB | 1 |
5 | 712257 | INDICATOR LIGHT, RED(FS) | 2 |
6 | 601098 | CB 10-24 X .500 ZYNC | 2 |
7 | 776476 | SWITCH, PTO 6201-321 | 1 |
8 | 604373 | RELAY CONTROL MODULE | 1 |
9 | 059832 | NT #10-24 HX NL ZN | 4 |
10 | 063198 | CS #10-24X0.750FLKG5 | 2 |
11 | 605836 | CABLE, THROTTLE 50" | 1 |
12 | 704932 | FW 0.219X.50X.05 ZN | 2 |
13 | 000430 | WIRE TIE, SMALL/LONG | 1 |
14 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
15 | 768515 | FW 0.281SAE | 4 |
16 | 606156 | DECAL, INST PANEL | 1 |
17 | 554473 | SVC PART, INST PANEL | 1 |
18 | 034280 | CS .312-18X0.750HXG5 | 1 |
19 | 768523 | FW 0.343SAE | 2 |
20 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
21 | 034272 | NT .312-18HXG5 | 1 |
22 | 000331 | WIRE TIE, SMALL/SHORT | 8 |
23 | 605456 | WIRE HARNESS, BRIGGS DFI | 1 |
24 | 114052 | KIT, CLUTCH CONN. REP | 1 |
25 | 604430 | WIRE HARNESS | 1 |
26 | 601047 | HOLDER, FUSE | 1 |
1. Part of the wire harness.
2. The instrument panel includes the decal
Item | Part Number | Description | Qty Needed |
1 | 786657 | CABLE, CHOKE | 1 |
2 | 785808 | KEY ASSEMBLY | 1 |
3 | 045898 | IGNITION SWITCH | 1 |
4 | 603748 | FUEL DISPLAY/HOUR METER | 1 |
5 | 603523 | KNOB | 1 |
6 | 712257 | INDICATOR LIGHT, RED(FS) | 1 |
7 | 601098 | CB 10-24 X .500 ZYNC | 2 |
8 | 776476 | SWITCH, PTO 6201-321 | 1 |
9 | 604373 | RELAY CONTROL MODULE | 1 |
10 | 059832 | NT #10-24 HX NL ZN | 4 |
11 | 063198 | CS #10-24X0.750FLKG5 | 2 |
12 | 603475 | CABLE, THRTL 43" | 1 |
13 | 704932 | FW 0.219X.50X.05 ZN | 2 |
14 | 000430 | WIRE TIE, SMALL/LONG | 1 |
15 | 603916 | DECAL, INST PANEL | 1 |
16 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
17 | 768515 | FW 0.281SAE | 4 |
18 | 551399 | SVC PART, INST PANEL | 1 |
19 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
20 | 034280 | CS .312-18X0.750HXG5 | 1 |
21 | 768523 | FW 0.343SAE | 2 |
22 | 034272 | NT .312-18HXG5 | 1 |
23 | 000331 | WIRE TIE, SMALL/SHORT | 8 |
24 | 604241 | WIRE HARNESS | 1 |
25 | 114052 | KIT, CLUTCH CONN. REP | 1 |
26 | 604430 | WIRE HARNESS | 1 |
27 | 601047 | HOLDER, FUSE | 1 |
1. Part of the wire harness.
2. The instrument panel includes the decal.
Item | Part Number | Description | Qty Needed |
1 | 786657 | CABLE, CHOKE | 1 |
2 | 785808 | KEY ASSEMBLY | 1 |
3 | 045898 | IGNITION SWITCH | 1 |
4 | 606068 | GAUGE, FUEL/HOURMETER | 1 |
5 | 603523 | KNOB | 1 |
6 | 712257 | INDICATOR LIGHT, RED(FS) | 1 |
7 | 601098 | CB 10-24 X .500 ZYNC | 2 |
8 | 776476 | SWITCH, PTO 6201-321 | 1 |
9 | 604373 | RELAY CONTROL MODULE | 1 |
10 | 059832 | NT #10-24 HX NL ZN | 4 |
11 | 063198 | CS #10-24X0.750FLKG5 | 2 |
12 | 603475 | CABLE, THRTL 43" | 1 |
13 | 704932 | FW 0.219X.50X.05 ZN | 2 |
14 | 000430 | WIRE TIE, SMALL/LONG | 1 |
15 | 606075 | DECAL, INST PANEL | 1 |
16 | 055947 | CS .250-20X0.50 HX G5 ZN | 4 |
17 | 768515 | FW 0.281SAE | 4 |
18 | 554472 | SVC, INSTR. PANEL X1 | 1 |
19 | 043570 | CLIP - HOSE - SINGLE(FS) | 1 |
20 | 034280 | CS .312-18X0.750HXG5 | 1 |
21 | 768523 | FW 0.343SAE | 2 |
22 | 034272 | NT .312-18HXG5 | 1 |
23 | 000331 | WIRE TIE, SMALL/SHORT | 8 |
24 | 604241 | WIRE HARNESS | 1 |
25 | 114052 | KIT, CLUTCH CONN. REP | 1 |
26 | 604430 | WIRE HARNESS | 1 |
27 | 601047 | HOLDER, FUSE | 1 |
1. Part of the wire harness.
2. The instrument panel includes the decal.
Item | Part Number | Description | Qty Needed |
1 | 113147 | BATTERY STRAP, SZ | 1 |
2 | 075994 | CS .250-20X3.250HXG5 | 2 |
3 | 768515 | FW 0.281SAE | 2 |
4 | 024927 | NT .250-20HXG5 | 2 |
5 | 029868 | LW .250 INTEXT ZN | 4 |
6 | 055939 | CS .250-20X0.75 HX G5 ZN | 2 |
7 | 771428 | BATTERY CBL BOOT-RED(FS) | 1 |
8 | 000331 | WIRE TIE, SMALL/SHORT | 3 |
Section 6: Deck, Deck Belt, Blades & Deck Lift
Item | Part Number | Description | Qty Needed |
1 | 550737 | 48" SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 781419 | DECAL, BELT ROUTING | 1 |
4 | 601624 | DECAL, DISCHARGE CHUTE | 1 |
5 | 601837 | DECAL, DECK DANGERS | 2 |
6 | 601892 | DECAL, THROWN OBJECTS | 1 |
7 | 793976 | DECAL,48"DECK ID | 1 |
8 | 603092 | DECAL, VX4 TECHNOLOGY | 1 |
1. The deck includes decals and hardware.
1. Torque to 67–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
-- | 607407 | SPINDLE ASSY, DUCTILE | 1 |
1 | 607477 | GREASE ZERK | 1 |
2 | 607478 | RELIEF FITTING | 1 |
3 | 607955 | BEARING | 2 |
Item | Part Number | Description | Qty Needed |
1 | 113241 | COVER, PULLEY RH 54" | 2 |
2 | 792002 | KNOB,5/16-18 X 3/4"MALE | 4 |
3 | 602429 | DISCHARGE CHUTE | 1 |
4 | 086660 | NT .375-16NLG8 | 5 |
5 | 602435 | SPRING, TORSION | 1 |
6 | 602432 | PIN, CHUTE | 1 |
7 | 786491 | DECK BELT | 1 |
8 | 602817 | RUBBER BUMPER | 1 |
9 | 079210 | FW 0.344X1.0X0.06 ZN | 2 |
10 | 064014 | CS .312-18X0.875HXG5 | 2 |
11 | 113563 | BACKING PLATE W/A | 1 |
12 | 795757 | BLADE, F16.50"-H-F-CW | 3 |
Not Shown | 601014 | BLADE, F16.50"-L-F-CW | 3 |
Not Shown | 601123 | BLADE, 16.50"-L-F-CW | 3 |
Not Shown | 796623 | BLADE, 16.50"-MUL-F-CW | 3 |
Not Shown | 796631 | BLADE, 16.50"-GAT-F-CW | 3 |
13 | 782474 | CW .678 X 2.250 X .187 | 3 |
14 | 781872 | CS .625-11X1.250HXG5 | 3 |
15 | 113266 | WALL, ADJ INNER LH 48" | 1 |
16 | 113267 | WALL, ADJ INNER RH 48" | 1 |
17 | 025395 | CB .375-16X 1.00 G5 ZN | 4 |
18 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
1. Do not torque; the discharge chute must pivot freely.
2. Torque to 118 ft-lbs.
3. Torque to 10 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 782995 | DECK LIFT SPRING S/A | 2 |
5 | 055749 | CS .437-14X1.750HXG5 | 7 |
6 | 348391 | CHAIN, DECK LIFT | 4 |
7 | 704643 | NT .437-14FLKG5 | 16 |
8 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
9 | 015495 | GREASE FITTING STRAIGHT | 4 |
10 | 781872 | CS .625-11X1.250HXG5 | 1 |
11 | 704783 | FW 0.625X1.500X0.105 | 1 |
12 | 348458 | YOKE W/A, DECK LEVELER | 1 |
13 | 034272 | NT .312-18HXG5 | 1 |
14 | 756270 | CS .312-18X1.500HXG5 | 1 |
15 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
16 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
17 | 061101 | NT .750-10 HX ZN NL GR B | 2 |
18 | 025296 | FW .760X1.63X0.08 ZN | 4 |
19 | 051169 | CS .750-10X3.000HXG5 | 2 |
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 782995 | DECK LIFT SPRING S/A | 2 |
5 | 055749 | CS .437-14X1.750HXG5 | 7 |
6 | 348391 | CHAIN, DECK LIFT | 4 |
7 | 704643 | NT .437-14FLKG5 | 16 |
8 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
9 | 015495 | GREASE FITTING STRAIGHT | 4 |
10 | 781872 | CS .625-11X1.250HXG5 | 1 |
11 | 704783 | FW 0.625X1.500X0.105 | 1 |
12 | 348458 | YOKE W/A, DECK LEVELER | 1 |
13 | 034272 | NT .312-18HXG5 | 1 |
14 | 756270 | CS .312-18X1.500HXG5 | 1 |
15 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
16 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
Item | Part Number | Description | Qty Needed |
1 | 550738 | 54" SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 781419 | DECAL, BELT ROUTING | 1 |
4 | 601624 | DECAL, DISCHARGE CHUTE | 1 |
5 | 601837 | DECAL, DECK DANGERS | 2 |
6 | 601892 | DECAL, THROWN OBJECTS | 1 |
7 | 793976 | DECAL,48"DECK ID | 1 |
8 | 603092 | DECAL, VX4 TECHNOLOGY | 1 |
1. The deck includes decals and hardware.
1. Torque to 67–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
-- | 607407 | SPINDLE ASSY, DUCTILE | 1 |
1 | 607477 | GREASE ZERK | 1 |
2 | 607478 | RELIEF FITTING | 1 |
3 | 607955 | BEARING | 2 |
Item | Part Number | Description | Qty Needed |
1 | 113241 | COVER, PULLEY RH 54" | 1 |
2 | 113240 | COVER, PULLEY LH 54" | 1 |
3 | 602429 | DISCHARGE CHUTE | 1 |
4 | 602435 | SPRING, TORSION | 1 |
5 | 602432 | PIN, CHUTE | 1 |
6 | 086660 | NT .375-16NLG8 | 5 |
7 | 792002 | KNOB,5/16-18 X 3/4"MALE | 4 |
8 | 789388 | DECK BELT | 1 |
9 | 602817 | RUBBER BUMPER | 1 |
10 | 113563 | BACKING PLATE W/A | 1 |
11 | 079210 | FW 0.344X1.0X0.06 ZN | 2 |
12 | 064014 | CS .312-18X0.875HXG5 | 2 |
13 | 797696 | BLADE, F18.50"-H-F-CW | 3 |
Not Shown | 601012 | BLADE F18.50"-L-F-CW | 3 |
Not Shown | 797704 | BLADE, 18.50"-MUL-F-CW | 3 |
Not Shown | 797712 | BLADE, 18.50"-GAT-F-CW | 3 |
14 | 782474 | CW .678 X 2.250 X .187 | 3 |
15 | 781872 | CS .625-11X1.250HXG5 | 3 |
16 | 113210 | WALL, INNER ADJ LH 54" | 1 |
17 | 767954 | FW 0.379X.82X.06 HD ZN | 4 |
17 | 025395 | CB .375-16X 1.00 G5 ZN | 4 |
18 | 113211 | WALL, INNER ADJ RH 54" | 1 |
1. Do not torque; the discharge chute must pivot freely.
2. Torque to 118 ft-lbs.
3. Torque to 10 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 782995 | DECK LIFT SPRING S/A | 2 |
5 | 055749 | CS .437-14X1.750HXG5 | 7 |
6 | 348391 | CHAIN, DECK LIFT | 4 |
7 | 704643 | NT .437-14FLKG5 | 16 |
8 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
9 | 015495 | GREASE FITTING STRAIGHT | 4 |
10 | 781872 | CS .625-11X1.250HXG5 | 1 |
11 | 704783 | FW 0.625X1.500X0.105 | 1 |
12 | 348458 | YOKE W/A, DECK LEVELER | 1 |
13 | 034272 | NT .312-18HXG5 | 1 |
14 | 756270 | CS .312-18X1.500HXG5 | 1 |
15 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
16 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 782995 | DECK LIFT SPRING S/A | 2 |
5 | 055749 | CS .437-14X1.750HXG5 | 7 |
6 | 348391 | CHAIN, DECK LIFT | 4 |
7 | 704643 | NT .437-14FLKG5 | 16 |
8 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
9 | 015495 | GREASE FITTING STRAIGHT | 4 |
10 | 781872 | CS .625-11X1.250HXG5 | 1 |
11 | 704783 | FW 0.625X1.500X0.105 | 1 |
12 | 348458 | YOKE W/A, DECK LEVELER | 1 |
13 | 034272 | NT .312-18HXG5 | 1 |
14 | 756270 | CS .312-18X1.500HXG5 | 1 |
15 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
16 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
17 | 061101 | NT .750-10 HX ZN NL GR B | 2 |
18 | 025296 | FW .760X1.63X0.08 ZN | 4 |
19 | 051169 | CS .750-10X3.000HXG5 | 2 |
Item | Part Number | Description | Qty Needed |
1 | 550934 | 54" RD SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 601892 | DECAL, THROWN OBJECTS | 2 |
4 | 603391 | DECAL, RUBBER FLAP | 2 |
5 | 796953 | DECAL, RD DECK RTG | 1 |
6 | 601837 | DECAL, DECK DANGERS | 2 |
7 | 799171 | DECAL, 54" DECK ID | 1 |
1. The deck includes decals and hardware.
Item | Part Number | Description | Qty Needed |
1 | 794446 | CS .625-11X1.500HXG5 | 1 |
2 | 028118 | FW 0.625X1.00X.13 ZN | 7 |
3 | 603057 | DUST SHIELD W/OFFSET | 5 |
4 | 796714 | PULLEY, 6" HB IDLER RD | 5 |
5 | 600296 | SPACER, DECK IDLER | 1 |
6 | 109948 | IDLER ARM W/A | 1 |
7 | 781567 | NT .500-13NLG5 | 1 |
8 | 767962 | FW .531 x 1.063 x .175 | 13 |
9 | 770867 | BUSHING, PLAS .750x1(FS) | 2 |
10 | 109549 | BUSHING, IDLER PIVOT | 1 |
11 | 781302 | IDLER SPRING | 1 |
12 | 259812 | CHAIN, 13 LINK | 1 |
13 | 016972 | NT .625-11 HX G5 ZN | 4 |
14 | 704759 | FW 0.500X1.25X.08 ZN | 1 |
15 | 797910 | CS .312-18x1.50FLT SH ZN | 2 |
16 | 601779 | IDLER GUIDE, UHMW | 1 |
17 | 782474 | CW .678 X 2.250 X .187 | 2 |
18 | 783738 | CS .625-11X3.000HXG5 | 2 |
19 | 768523 | FW 0.343SAE | 1 |
20 | 058776 | NT .312-18NLG5 | 1 |
21 | 705954 | CS .500-13X1.25 HX G5 ZN | 15 |
22 | 752386 | CW .505 X 1.625 X .140 | 3 |
23 | 798967 | PULLEY, B-SEC 5.44 EOD | 3 |
24 | 212472 | KEY 1/4 SQ X 1.00 LG(FS) | 3 |
25 | 607407 | SPINDLE ASSY, DUCTILE | 2 |
26 | 607408 | SPINDLE ASSY, DUCTILE | 1 |
1. Torque to 67–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
-- | 607407 | Spindle | 3 |
-- | 607408 | Spindle | 3 |
1 | 607477 | GREASE ZERK | 1 |
2 | 607478 | RELIEF FITTING | 1 |
3 | 607955 | BEARING | 2 |
Item | Part Number | Description | Qty Needed |
1 | 058776 | NT .312-18NLG5 | 10 |
2 | 768523 | FW 0.343SAE | 10 |
3 | 015495 | GREASE FITTING STRAIGHT | 2 |
4 | 036244 | CS .375-16X1.00 HX G5 ZN | 6 |
5 | 767954 | FW 0.379X.82X.06 HD ZN | 12 |
6 | 113340 | PUSHER W/A, HZ/SZ | 1 |
7 | 778399 | FW .781X1.38X.25 ZN | 2 |
8 | 109482 | CHUTE BRACKET | 1 |
9 | 109483 | CHUTE BRACKET | 1 |
10 | 109487 | CLAMP ANGLE RS | 1 |
11 | 113980 | DISCHARGE SHIELD | 1 |
12 | 109486 | CLAMP ANGLE LS | 1 |
13 | 601483 | SIDE FLAP, RUBBER | 2 |
14 | 086660 | NT .375-16NLG8 | 6 |
15 | 107972 | ANGLE, RD DISCHARGE FLAP | 2 |
16 | 601017 | RUBBER, RD DISCHARGE CHU | 2 |
17 | 107973 | ANGLE, DECK STIFFENER | 2 |
18 | 037887 | CB .312-18X 1.000 FUL ZN | 6 |
19 | 016253 | CB .312-18X .750 FUL ZN | 4 |
20 | 114522 | STOP, REAR DECK W/A | 1 |
21 | 710194 | CB .375-16X 1.50 STD G5 | 6 |
Item | Part Number | Description | Qty Needed |
1 | 550914 | SVC PULLEY COVER RS CE | 1 |
2 | 110448 | PULLEY COVER, LH | 1 |
3 | 601837 | DECAL, DECK DANGERS | 1 |
4 | 792002 | KNOB,5/16-18 X 3/4"MALE | 4 |
5 | 025577 | BELT, B 197.9" EL | 1 |
6 | 781567 | NT .500-13NLG5 | 1 |
7 | 767962 | FW .531 x 1.063 x .175 | 1 |
8 | 602341 | WHEEL, ANTI-SCALP | 1 |
9 | 602344 | SPACER, ANTI- SCALP 5.73 | 1 |
10 | 602338 | CB .50-13 X 7.50 STD ZN | 1 |
11 | 601013 | BLADE, F18.50-L-F-CCW | 1 |
12 | 782474 | CW .678 X 2.250 X .187 | 3 |
13 | 604383 | CS .625-11X1.250 G5 LHT | 1 |
14 | 114013 | BAFFLE, ADJUSTABLE RS | 1 |
15 | 114014 | BAFFLE, ADJUSTABLE LS | 1 |
16 | 055822 | CS .375-16X0.75 HX G5 ZN | 6 |
17 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
18 | 601012 | BLADE F18.50"-L-F-CW | 2 |
Not Shown | 601124 | BLADE, 18.50"-L-F-CW | 2 |
19 | 781872 | CS .625-11X1.250HXG5 | 2 |
1. Torque to 118 ft-lbs.
2. The RS pulley cover (550914) includes the decal (601837).
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
5 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
6 | 782995 | DECK LIFT SPRING S/A | 2 |
7 | 055749 | CS .437-14X1.750HXG5 | 7 |
8 | 348391 | CHAIN, DECK LIFT | 4 |
9 | 704643 | NT .437-14FLKG5 | 16 |
10 | 015495 | GREASE FITTING STRAIGHT | 4 |
11 | 756270 | CS .312-18X1.500HXG5 | 1 |
12 | 034272 | NT .312-18HXG5 | 1 |
13 | 704783 | FW 0.625X1.500X0.105 | 1 |
14 | 781872 | CS .625-11X1.250HXG5 | 1 |
15 | 348458 | YOKE W/A, DECK LEVELER | 1 |
16 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
5 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
6 | 782995 | DECK LIFT SPRING S/A | 2 |
7 | 055749 | CS .437-14X1.750HXG5 | 7 |
8 | 348391 | CHAIN, DECK LIFT | 4 |
9 | 704643 | NT .437-14FLKG5 | 16 |
10 | 015495 | GREASE FITTING STRAIGHT | 4 |
11 | 756270 | CS .312-18X1.500HXG5 | 1 |
12 | 034272 | NT .312-18HXG5 | 1 |
13 | 704783 | FW 0.625X1.500X0.105 | 1 |
14 | 781872 | CS .625-11X1.250HXG5 | 1 |
15 | 348458 | YOKE W/A, DECK LEVELER | 1 |
16 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
17 | 025296 | FW .760X1.63X0.08 ZN | 4 |
18 | 061101 | NT .750-10 HX ZN NL GR B | 2 |
19 | 789115 | CS .750-10X3.500HXG5 | 2 |
Item | Part Number | Description | Qty Needed |
1 | 550739 | 60" SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 781419 | DECAL, BELT ROUTING | 1 |
4 | 604221 | DECAL, DANGER / CHUTE | 1 |
5 | 601837 | DECAL, DECK DANGERS | 2 |
6 | 601892 | DECAL, THROWN OBJECTS | 1 |
7 | 786277 | DECAL, 60 DECK ID | 1 |
8 | 603092 | DECAL, VX4 TECHNOLOGY | 1 |
1. The deck includes decals and hardware.
1. Torque to 67–75 ft-lbs.
Item | Part Number | Description | Qty Needed |
-- | 607407 | SPINDLE ASSY, DUCTILE | 1 |
1 | 607477 | GREASE ZERK | 1 |
2 | 607478 | RELIEF FITTING | 1 |
3 | 607955 | BEARING | 2 |
Item | Part Number | Description | Qty Needed |
1 | 112933 | COVER, PULLEY RH 60" | 1 |
2 | 112934 | COVER, PULLEY LH 60" | 1 |
3 | 792002 | KNOB,5/16-18 X 3/4"MALE | 4 |
4 | 782292 | DECK BELT | 1 |
5 | 602891 | CHUTE, DISCHARGE LG | 1 |
6 | 602435 | SPRING, TORSION | 1 |
7 | 602432 | PIN, CHUTE | 1 |
8 | 086660 | NT .375-16NLG8 | 7 |
9 | 113563 | BACKING PLATE W/A | 1 |
10 | 602817 | RUBBER BUMPER | 1 |
11 | 079210 | FW 0.344X1.0X0.06 ZN | 2 |
12 | 064014 | CS .312-18X0.875HXG5 | 2 |
13 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
14 | 113180 | WALL, INNER ADJ RH 60" | 1 |
15 | 025395 | CB .375-16X 1.00 G5 ZN | 6 |
16 | 113179 | WALL, INNER ADJ LH 60" | 1 |
17 | 794685 | BLADE, F20.50"-H-F-CW | 3 |
Not Shown | 602771 | BLADE, F20.50" EHN-F-CW | 3 |
Not Shown | 793794 | BLADE,20.50"-L-F-CW | 3 |
Not Shown | 794214 | BLADE,20.50"-MUL-F-CW | 3 |
Not Shown | 794230 | BLADE,20.50"GAT-F-CW | 3 |
18 | 782474 | CW .678 X 2.250 X .187 | 3 |
19 | 781872 | CS .625-11X1.250HXG5 | 3 |
1. Do not torque; the discharge chute must pivot freely.
2. Torque to 118 ft-lbs.
3. Torque to 10 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 782995 | DECK LIFT SPRING S/A | 2 |
5 | 055749 | CS .437-14X1.750HXG5 | 7 |
6 | 348391 | CHAIN, DECK LIFT | 4 |
7 | 704643 | NT .437-14FLKG5 | 16 |
8 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
9 | 015495 | GREASE FITTING STRAIGHT | 4 |
10 | 781872 | CS .625-11X1.250HXG5 | 1 |
11 | 704783 | FW 0.625X1.500X0.105 | 1 |
12 | 348458 | YOKE W/A, DECK LEVELER | 1 |
13 | 034272 | NT .312-18HXG5 | 1 |
14 | 756270 | CS .312-18X1.500HXG5 | 1 |
15 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
16 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 782995 | DECK LIFT SPRING S/A | 2 |
5 | 055749 | CS .437-14X1.750HXG5 | 7 |
6 | 348391 | CHAIN, DECK LIFT | 4 |
7 | 704643 | NT .437-14FLKG5 | 16 |
8 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
9 | 015495 | GREASE FITTING STRAIGHT | 4 |
10 | 781872 | CS .625-11X1.250HXG5 | 1 |
11 | 704783 | FW 0.625X1.500X0.105 | 1 |
12 | 348458 | YOKE W/A, DECK LEVELER | 1 |
13 | 034272 | NT .312-18HXG5 | 1 |
14 | 756270 | CS .312-18X1.500HXG5 | 1 |
15 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
16 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
17 | 061101 | NT .750-10 HX ZN NL GR B | 2 |
18 | 025296 | FW .760X1.63X0.08 ZN | 4 |
19 | 051169 | CS .750-10X3.000HXG5 | 2 |
Item | Part Number | Description | Qty Needed |
1 | 550935 | 60" RD SERVICE DECK | 1 |
2 | 601069 | CN .312-18x.200 MAX THK | 4 |
3 | 603349 | DECAL, 2 BELT ROUTING | 1 |
4 | 601837 | DECAL, DECK DANGERS | 2 |
5 | 601892 | DECAL, THROWN OBJECTS | 2 |
6 | 603391 | DECAL, RUBBER FLAP | 2 |
7 | 786277 | DECAL, 60 DECK ID | 1 |
8 | 792887 | RIVET NUT,HX 5/16-18 TH | 1 |
1. The deck includes decals and hardware.
Item | Part Number | Description | Qty Needed |
32 | 705954 | CS .500-13X1.25 HX G5 ZN | 1 |
33 | 017616 | CS .500-13X1.750HXG5 | 2 |
34 | 752386 | CW .505 X 1.625 X .140 | 3 |
35 | 770842 | PULLEY, DECK DRIVE | 2 |
36 | 524785 | PULLEY, (711499) PTED B | 1 |
37 | 212472 | KEY 1/4 SQ X 1.00 LG(FS) | 3 |
38 | 045765 | FW 1.030X1.50X.13 HD ZN | 2 |
39 | 016527 | CS .500-13X1.000HXG5 | 12 |
40 | 114108 | SPACER 3/8" THICK | 1 |
41 | 607408 | SPINDLE ASSY, DUCTILE | 1 |
42 | 607407 | SPINDLE ASSY, DUCTILE | 2 |
1. Torque to 67–75 ft-lbs
Item | Part Number | Description | Qty Needed |
-- | 607407 | Spindle | 3 |
-- | 607408 | Spindle | 3 |
1 | 607477 | GREASE ZERK | 1 |
2 | 607478 | RELIEF FITTING | 1 |
3 | 607955 | BEARING | 2 |
Item | Part Number | Description | Qty Needed |
1 | 058776 | NT .312-18NLG5 | 10 |
2 | 768523 | FW 0.343SAE | 10 |
3 | 778399 | FW .781X1.38X.25 ZN | 2 |
4 | 109483 | CHUTE BRACKET | 1 |
5 | 109482 | CHUTE BRACKET | 1 |
6 | 015495 | GREASE FITTING STRAIGHT | 2 |
7 | 036244 | CS .375-16X1.00 HX G5 ZN | 6 |
8 | 767954 | FW 0.379X.82X.06 HD ZN | 12 |
9 | 113340 | PUSHER W/A, HZ/SZ | 1 |
10 | 109487 | CLAMP ANGLE RS | 1 |
11 | 601483 | SIDE FLAP, RUBBER | 2 |
12 | 114439 | SHIELD, DUST 60" RD X-1 | 1 |
13 | 109486 | CLAMP ANGLE LS | 1 |
14 | 037887 | CB .312-18X 1.000 FUL ZN | 6 |
15 | 016253 | CB .312-18X .750 FUL ZN | 4 |
16 | 114522 | STOP, REAR DECK W/A | 1 |
17 | 086660 | NT .375-16NLG8 | 6 |
18 | 106716 | ANGLE, DISCHARGE CHUTE | 2 |
19 | 600254 | FLAP, RD REAR | 2 |
20 | 351676 | ANGLE, DECK STIFFENER | 2 |
21 | 710194 | CB .375-16X 1.50 STD G5 | 6 |
Item | Part Number | Description | Qty Needed |
1 | 550939 | SVC PULLEY COVER RS US | 1 |
2 | 601837 | DECAL, DECK DANGERS | 1 |
3 | 792002 | KNOB,5/16-18 X 3/4"MALE | 5 |
4 | 114209 | PULLEY COVER, CENTER 60 | 1 |
5 | 114210 | PULLEY COVER, 60" RD LH | 1 |
6 | 784322 | DECK BELT | 1 |
7 | 603397 | BELT, BB-SECTION | 1 |
8 | 603049 | S/C TO 607288 | 2 |
Not Shown | 607288 | CB .50-13X4.75 STD ZN | 2 |
9 | 767962 | FW .531 x 1.063 x .175 | 3 |
10 | 781567 | NT .500-13NLG5 | 3 |
11 | 602345 | SPACER, ANTI-SCALP 3.22 | 2 |
12 | 602263 | WHEEL, ANTI-SCALP | 2 |
13 | 602338 | CB .50-13 X 7.50 STD ZN | 1 |
14 | 602341 | WHEEL, ANTI-SCALP | 1 |
15 | 602344 | SPACER, ANTI- SCALP 5.73 | 1 |
Not Shown | 607288 | CB .50-13X4.75 STD ZN | 2 |
1. The RS pulley cover (550939) includes the decal (601837).
Item | Part Number | Description | Qty Needed |
16 | 055822 | CS .375-16X0.75 HX G5 ZN | 6 |
17 | 767954 | FW 0.379X.82X.06 HD ZN | 6 |
18 | 114204 | BAFFLE, ADJUSTABLE 60 RS | 1 |
19 | 114205 | BAFLE, ADJUSTABLE 60 LS | 1 |
20 | 795633 | BLADE, F20.50"-L-F-CCW | 1 |
Not Shown | 601928 | BLADE, 20.5"GAT-F-CCW | 1 |
Not Shown | 604163 | BLADE, 20.50-MUL-F-CCW | 1 |
21 | 782474 | CW .678 X 2.250 X .187 | 3 |
22 | 604383 | CS .625-11X1.250 G5 LHT | 1 |
23 | 600901 | BLADE, F20.50"-L-F-CW | 2 |
Not Shown | 794214 | BLADE,20.50"-MUL-F-CW | 2 |
Not Shown | 794230 | BLADE,20.50"GAT-F-CW | 2 |
24 | 781872 | CS .625-11X1.250HXG5 | 2 |
1. Torque to 118 ft-lbs.
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
5 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
6 | 782995 | DECK LIFT SPRING S/A | 2 |
7 | 055749 | CS .437-14X1.750HXG5 | 7 |
8 | 348391 | CHAIN, DECK LIFT | 4 |
9 | 704643 | NT .437-14FLKG5 | 16 |
10 | 015495 | GREASE FITTING STRAIGHT | 4 |
11 | 756270 | CS .312-18X1.500HXG5 | 1 |
12 | 034272 | NT .312-18HXG5 | 1 |
13 | 704783 | FW 0.625X1.500X0.105 | 1 |
14 | 781872 | CS .625-11X1.250HXG5 | 1 |
15 | 348458 | YOKE W/A, DECK LEVELER | 1 |
16 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
Item | Part Number | Description | Qty Needed |
1 | 600437 | PIN, DECK HEIGHT W/A | 1 |
2 | 348318 | HANDLE, STOP | 1 |
3 | 602898 | DECK LIFT | 1 |
4 | 781294 | CLIP E, 1.00 X.625X .05 | 6 |
5 | 781229 | CE .750X2.25 X1.75 HEAD | 1 |
6 | 782995 | DECK LIFT SPRING S/A | 2 |
7 | 055749 | CS .437-14X1.750HXG5 | 7 |
8 | 348391 | CHAIN, DECK LIFT | 4 |
9 | 704643 | NT .437-14FLKG5 | 16 |
10 | 015495 | GREASE FITTING STRAIGHT | 4 |
11 | 756270 | CS .312-18X1.500HXG5 | 1 |
12 | 034272 | NT .312-18HXG5 | 1 |
13 | 704783 | FW 0.625X1.500X0.105 | 1 |
14 | 781872 | CS .625-11X1.250HXG5 | 1 |
15 | 348458 | YOKE W/A, DECK LEVELER | 1 |
16 | 781831 | CS .437-14x1.75 FULTHG5 | 1 |
17 | 025296 | FW .760X1.63X0.08 ZN | 4 |
18 | 061101 | NT .750-10 HX ZN NL GR B | 2 |
19 | 789115 | CS .750-10X3.500HXG5 | 2 |
Section 7: Seat & ROPS
1. Do not torque; the seat pan and seat pan stop must pivot freely.
2. The seat pan (550741), seat support angle (552386), LS frame cover (550766) and RS frame cover (550765) include decals.
Item | Part Number | Description | Qty Needed |
Not Shown | 602966 | SEAT, SUPER DELUXE | 1 |
1 | 603692 | SEAT BACK COVER | 1 |
2 | 603260 | SUPER DELUXE SEAT ARMRES | 1 |
3 | 603691 | SEAT COVER | 1 |
4 | 603133 | SEAT BELT KIT, SEATS INC | 1 |
5 | 603148 | N/O SEAT SWITCH | 1 |
6 | 604944 | SEAT SLIDES (PAIR) | 2 |
Not Shown | 122175 | SEAT REPAIR KIT | 1 |
Item | Part Number | Description | Qty Needed |
Not Shown | 792051 | SEAT, MICHIGAN SUSPENSION | 1 |
1 | 797571 | SEAT, BACK PANEL KIT | 1 |
2 | 601533 | ARMREST ASSEMBLY RH | 1 |
3 | 601534 | ARMREST ASSEMBLY LH | 1 |
4 | 793281 | BACK CUSHION KIT | 1 |
5 | 793323 | KNOB KIT | 1 |
6 | 602076 | SEAT DRAIN | 1 |
7 | 793299 | SEAT CUSHION KIT | 1 |
8 | 797480 | 2 ARMRESTS, MOLDED RND | 1 |
9 | 793315 | SWITCH, SNAP MOUNT | 1 |
10 | 793273 | ARMREST,STOP ASSY | 1 |
11 | 793307 | SLIDE KIT | 1 |
12 | 603152 | SHOCK ABSORBER KIT | 1 |
13 | 603040 | SPRING AND SADDLE KIT | 1 |
14 | 601458 | SEAT WEIGHT ADJUST KIT | 1 |
1. Do not torque; the seat pan and seat pan stop must pivot freely.
2. The seat pan (550741), seat support angle (552386), LS frame cover (550766) and RS frame cover (550765) include decals.
Item | Part Number | Description | Qty Needed |
1 | 604890 | ROPS ASSY | 1 |
2 | 077859 | CS .500-13X3.250HXG5 | 4 |
3 | 767962 | FW .531 x 1.063 x .175 | 8 |
4 | 023317 | NT .500-13UNTG8 | 4 |
5 | 605044 | KIT, ROPS HARDWARE | 1 |
6 | 605646 | KIT, POLY STOP (PAIR) | 2 |
Item | Part Number | Description | Qty Needed |
1 | 605639 | S/C TO 608230 | 1 |
Not Shown | 608230 | SVC, ROPS ASSY | 1 |
2 | 605731 | KIT, POLY STOP (SET) | 1 |
3 | 605638 | ROPS HARDWARE KIT | 1 |
4 | 061812 | CS .500-13X3.50 HX G5 ZN | 4 |
5 | 767962 | FW .531 x 1.063 x .175 | 8 |
6 | 023317 | NT .500-13UNTG8 | 4 |
1. Torque to 73 ft-lbs.