• Send Us a Message
  • Hustler X-One Parts (941070 60" X-One Rear-Discharge Kawasaki FX730) 2021+

    All Hustler Parts Diagrams

    Welcome to the Hustler X-One parts lookup page. All parts are OEM replacement parts from the Hustler Turf Warehouse in Heston, Kansas. This section is for all Hustler X-One 941070 models.

    All parts listed below are available and ship same day if in stock. If the parts are not in stock, lead time is 3 days. If you have any questions or would like help with parts lookup, give us a call and we will be happy to help!

    410-692-5170

     

    Quick List Replacement Parts List

    Item Part Number Description Qty Needed
    1 785261 AIR FILTER - MAIN 1
    2 785279 AIR FILTER - SAFETY 1
    3 602581 ENGINE OIL FILTER 1
    4 068478 FUEL FILTER - IN LINE 1
    5 604323 VAPOR SYSTEM FILTER 1
    6 604126 HYDRAULIC OIL FILTER 1
    7 600901 BLADE, F20.50"-L-F-CW 3
    8 600901x 10PK BLADE, 20.50"-L-F-C 1
    9 794214 BLADE,20.50"-MUL-F-CW 3
    10 794214x 10PK BLADE, 20.50"-MUL-F 1
    11 604494 DECK BELT 1
    12 606411 DRIVE BELT 1
    13 776476 SWITCH, PTO 6201-321 1
    14 045898 IGNITION SWITCH 1
    15 606082 SVC, OPS 1
    16 602263 WHEEL, ANTI-SCALP 2
    17 602341 WHEEL, ANTI-SCALP 1
    18 605376 DECK BUMPER 1
    19 792002 KNOB,5/16-18 X 3/4"MALE 1
    20 606918 MAGNETIC PIN, 1/2 x 3.13 1
    21 785808 KEY ASSEMBLY 1
    22 603807 CAP, 3.5" RATCHETING GAS 1

     

    Section 1: Frame & Engine Guard

     

    Item Part Number Description Qty Needed
    1 554284 SVC FRAME 1
    2 781880 BUMPER, .500x 1.00x .31 4
    3 601982 CN .250-20X .150 MAX THK 2
    4 N/A SERIAL NUMBER / SPEC DECAL 3
    5 601967 DECAL, ENGINE COMPART 1
    6 601993 DECAL, SAFE OPERATION 1
    7 600961 RIVET NUT, 1/2-13 THREAD 4
    8 602041 DECAL, HOT 2
    9 791848 DECAL, FUEL INDICATOR- M 1
    10 602407 DECAL, HUSTLER ID 1
    11 015495 GREASE FITTING STRAIGHT 4

    1. Serial number decal. In the event the serial number decal becomes damaged or illegible, please contact your dealer to order a replacement.

    2. EPA compliance decal.

    3. Patent numbers decal.

    4. The frame includes the decals and rivet nuts.

    Item Part Number Description Qty Needed
    1 602345 SPACER, ANTI-SCALP 3.22 2
    2 602263 WHEEL, ANTI-SCALP 2
    3 377994 HEAT SHIELD, MMZ ROLLER 2
    4 767962 FW .531 x 1.063 x .175 8
    5 008193 NT .500-13HXG5 2
    6 068239 CS .500-13X4.500HXG5 2
    7 025395 CB .375-16X 1.00 G5 ZN 4
    8 705137 FW 0.391X1.25X.06 ZN 8
    9 086660 NT .375-16NLG8 4
    10 705954 CS .500-13X1.25 HX G5 ZN 4
    11 606807 DECAL, H LOGO 1
    12 555369 SVC, ENGINE GUARD 1
    13 606659 PLASTIC BUMPER, RH 1
    14 705178 CS .375-16X1.750HXG5 2
    15 606657 PLASTIC BUMPER, CENTER 1
    16 016899 NT .375-16 FLKG5 4
    17 126190-3 MUFFLER GUARD 1
    18 606658 PLASTIC BUMPER, LH 1
    19 036244 CS .375-16X1.00 HX G5 ZN 2

     

    Section 2: Transmissions, Drive Belt, Steering & Brake

    Item Part Number Description Qty Needed
    1 051151 CS .500-13X5.000HXG5 1
    2 344267 FW .510X2.15X.19 ZN 1
    3 767954 FW 0.379X.82X.06 HD ZN 4
    4 054502 NT .375-16HXG5 2
    5 036244 CS .375-16X1.00 HX G5 ZN 2
    6 124432-1 IDLER SPRING MOUNT 1
    7 781302 IDLER SPRING 1
    8 025007 CS .62511X1.750HXG5 1
    9 602304 PULLEY, 5" FLAT IDLER 1
    10 602880 BUSHING, IDLER PIVOT 1
    11 122905 TENSIONER W/A 1
    12 015495 GREASE FITTING STRAIGHT 1
    13 602879 BUSHING, IDLER PIVOT 1
    14 767962 FW .531 x 1.063 x .175 9
    15 781567 NT .500-13NLG5 1
    16 606411 DRIVE BELT 1
    17 023317 NT .500-13UNTG8 8
    18 017616 CS .500-13X1.750HXG5 8
    19 606401 TRANSMISSION, PARKER HTJ 1
    Not Shown 606402 TRANSMISSION, PARKER HTJ 1

    1. Torque to 71–75 ft-lbs.

    2. The tensioner should pivot freely.

    3. 606401 TRANSMISSION, PARKER HTJ is used on the Left Side of the mower. 606402 TRANSMISSION, PARKER HTJ is used on the Right Side of the mower.

    Item Part Number Description Qty Needed
    1 607509 SERVICE KIT, FAN 1
    2 608370 KIT, PULLEY, HTJ 1
    Not Shown 604132 SERVICE KIT, FAN/PULLEY 1
    3 604131 RESERVIOR CAP 1
    4 604126 HYDRAULIC OIL FILTER 1
    5 604130 PLUG & O-RING ASSEMBLY 1
    6 064337 ROSS WOODRUFF KEY 1
    7 065516 ROSS NUT 1
    8 606461 CONTROL LEVER PARKER 1
    9 607751 SEAL KIT - HTJ 1
    10 608297 SEAL KIT HTE/HTJ SEALS 1
    11 N/A GASKET, TOP HOUSING 1
    12 N/A PACKING, PREFORMED, O-RING SEAL 1
    13 N/A SEAL, CHARGE PUMP COVER 1
    14 N/A COVER CHARGE PUMP MACHINED 1
    15 608851 ALLEN PORT PLUG 2

    1. 608370 is used on mowers S/N 18124866 & HIGHER. 604132 is used on mowers S/N PRIOR TO 18124866.

    Item Part Number Description Qty Needed
    1 N/A REFER TO "STEERING COVER ASSEMBLY" 1
    2 601087 SWITCH, PLUNGER N.O. 2
    3 795351 DAMPER, CENTERING 2
    4 606521 PUMP ROD ASSEMBLY 2
    5 768523 FW 0.343SAE 10
    6 023655 NT 0.312-24 NL G8 4
    7 605924 STEERING BAR W/A 2
    Not Shown 781260 GRIP, STEERING BAR 2
    8 767954 FW 0.379X.82X.06 HD ZN 8
    9 036244 CS .375-16X1.00 HX G5 ZN 4
    10 055822 CS .375-16X0.75 HX G5 ZN 4
    11 016899 NT .375-16 FLKG5 4
    12 781922 BALL STUD 2
    13 029876 LW .312 INTEXT ZN 2
    14 016832 NT .312-18FLKG5 2
    15 608127 DECAL, USA, F&D 1
    16 608098 DECAL, X-ONE 1

    1. The steering handle includes the grip.

    Item Part Number Description Qty Needed
    1 112895 STEERING COVER W/A, SZ 1
    2 722199 POLYURETHANE 2" (FS) 11"
    3 784439 LOCK COLLAR,0.757 ID(FS) 2
    4 608000 BUSHING 2
    5 113007 STEER PIVOT TUBE, SZ 1
    6 603078 FW .750X1.50X.16 ZN 2
    7 606510 STEERING BOX SUB, RH 1
    8 034272 NT .312-18HXG5 2
    9 768523 FW 0.343SAE 4
    10 781922 BALL STUD 2
    11 606511 STEERING BOX SUB, LH 1
    12 080358 GM .50X1.00X.75X.12 1
    13 053199 NT .500-13JAMG5 2
    14 603055 SS .500-13X 2.50 SH ZN 2

     

     

    Item Part Number Description Qty Needed
    1 607151 STEERING ARM W/A 2
    2 086660 NT .375-16NLG8 3
    3 767954 FW 0.379X.82X.06 HD ZN 6
    4 705178 CS .375-16X1.750HXG5 3
    5 781153 BUSHING, UHMW 2
    6 348862 STEERLEVER BUSHING (PLA 2
    7 797738 SS .500-13X2.000SH 1
    8 123305 STEERING BOX W/A, LH 1
    9 047456 GM .750X.188X1.00X.12 1

     

    Item Part Number Description Qty Needed
    1 607151 STEERING ARM W/A 1
    2 086660 NT .375-16NLG8 3
    3 767954 FW 0.379X.82X.06 HD ZN 6
    4 705178 CS .375-16X1.750HXG5 3
    5 348862 STEERLEVER BUSHING (PLA 2
    6 797738 SS .500-13X2.000SH 1
    7 781153 BUSHING, UHMW 2
    8 123306 STEERING BOX W/A, RH 1
    9 047456 GM .750X.188X1.00X.12 1

     

    Item Part Number Description Qty Needed
    1 748913 CS .375-16x5.50 GR5 ZN 2
    2 767954 FW 0.379X.82X.06 HD ZN 12
    3 023655 NT 0.312-24 NL G8 4
    4 768523 FW 0.343SAE 6
    5 781583 BRAKE ROD ASSEMBLY 2
    6 705178 CS .375-16X1.750HXG5 2
    7 765339 BUSHING,IGUS#0608 (FS) 4
    8 126643-3 BELLCRANK, LH 1
    9 126644-3 BELLCRANK, RH 1
    10 073858 FW .406X .750X.250 ZN 2
    11 350397 BRAKE LINK TURNBUCKLE A 2
    12 705160 CS .375-16X1.625HXG5 2
    13 126646-3 EXTENSION, BRAKE ARM, LH 1
    14 126645-3 EXTENSION, BRAKE ARM, RH 1
    15 086660 NT .375-16NLG8 6
    16 607896 DUST SHIELD 2
    17 016832 NT .312-18FLKG5 4
    18 607894 BRAKE ASSY, LH 1
    19 607895 BRAKE ASSY, RH 1
    20 607893 DRUM HUB ASSEMBLY 2
    21 607328 CS .312-18X1.25HXG8 FL 8
    22 037887 CB .312-18X 1.000 FUL ZN 4
    23 601085 STUD, WHEEL LUG 1/2-20 10

    1. Included with the wheel motor.

    2. Torque to 220–240 ft-lbs.

    3. Torque to 25–28 ft-lbs.

    4. Do not torque; the nut should be snug but allow the brake bellcrank to pivot freely.

    5. The hub assembly includes the studs.

    Section 3: Wheels & Tires

    Item Part Number Description Qty Needed
    1 607104 TIR/WHL 24X12.00-12 BLK 2
    2 061077 WHEEL NUT 10
    3 606711 DUST CAP 2
    4 061101 NT .750-10 HX ZN NL GR B 2
    5 606715 CW 0.766 X 1.50 X .093 6
    6 606712 BEARING, TAPERED ROLLER 4
    7 606713 RACE, TAPERED ROLLER 4
    8 606817 GREASE PLUG 2
    9 606714 SEAL, 1.25 X 1.98 2
    10 -- REFER TO "FRONT WHEEL ASSEMBLY BREAKDOWN" 2

    1. Torque to 65–75 ft-lbs.

    Item Part Number Description Qty Needed
    1 123644-1 W/A, CASTER FORK 1
    2 061101 NT .750-10 HX ZN NL GR B 1
    3 025296 FW .760X1.63X0.08 ZN 2
    4 041475 CS .750-10X9.50 HX G5 ZN 1
    5 -- REFER TO "FRONT WHEEL SERVICE PARTS" 1

     

    Item Part Number Description Qty Needed
    -- 606745 TIR/WHL 13X6.50-6 BLK 1
    1 606815 DUST CAP, 0.752 ID 2
    2 606780 SEAL 2
    3 606778 SPACER, 0.531 2
    4 606753 BEARING, TAPERED ROLLER 2
    5 606126 GREASE FITTING, M8X1.0 1
    6 019521 TIRE VALVE TR-412 GOODY 1
    7 606752 WHL 6X4.50 BLK 1
    8 604843 TIR 13X6.50-6 B4R SMTH 1

     

    Item Part Number Description Qty Needed
    1 606967 TIR 24X12.00-12 B4R GRMR 1
    2 606498 WHL 12X8.50 5X4.5 BLK 1
    3 019521 TIRE VALVE TR-412 GOODY 1

     

    Section 4: Engine, Muffler, Clutch & Fuel System

    Item Part Number Description Qty Needed
    1 -- ENGINE, KAW FX730V 1
    2 796524 VALVE,OIL DRAIN M20x2.5 1
    3 016899 NT .375-16 FLKG5 1
    4 113970 CABLE GUIDE 1
    5 720516 CS M8-1.25X16HX FL10.9 3
    6 000398 CLAMP 1
    7 767954 FW 0.379X.82X.06 HD ZN 5
    8 036244 CS .375-16X1.00 HX G5 ZN 1
    9 604250 MUFFLER 1
    Not Shown 608006 MUFFLER, 726CC KAW 1
    10 602580 CS .375-16X1.25HXG8ZYP85 4
    11 034272 NT .312-18HXG5 2
    12 768523 FW 0.343SAE 5
    13 113946 CLUTCH ANCHOR 1
    14 036236 CS .312-18X1.000HXG5 2
    15 606471 PULLEY, ENG 5.318 OP 1
    16 212076 KEY 1/4 SQ X 1.50 LG(FS) 1
    17 606404k CLUTCH KIT 1
    18 791251 HARNESS, CLUTCH PIGTAIL 1
    19 000331 WIRE TIE, SMALL/SHORT 6
    20 602680 FW .453X1.12X.12 HRD ZN 1
    21 785659 CS .437-20X2.50 HXG5 P85 1
    22 029876 LW .312 INTEXT ZN 1
    23 796219 BATTERY CABLE,NEG 36" D 1
    24 789131 CAP, HUSTLRZ FAN CON(FS) 1
    25 604430 WIRE HARNESS 1
    26 744276 BATTERY CABLE POS RED 1
    27 000323 CLIP, HOSE CLAMP 2
    28 015818 FUEL LINE, 1/4" 16.5"
    29 603326 VAPOR LINE, 3/16" 23"
    30 603112 CLAMP, 3/16 FUEL 1

    1. Supplied with the engine.

    2. Torque to 30 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

    3. Torque to 45–48 ft-lbs.Replace (do not reuse) the cap screw if it is removed or loosened.

    4. Torque to 17 ft-lbs.

    5. Part of the wire harness.

    FUEL & VAPOR LINE LENGTHS

    A: 16.5" VALVE TO ENGINE (FUEL)

    B: 23" TEE TO ENGINE (VAPOR)

    Item Part Number Description Qty Needed
    1 785261 AIR FILTER - MAIN 1
    2 785279 AIR FILTER - SAFETY 1
    3 602581 ENGINE OIL FILTER 1
    4 068478 FUEL FILTER - IN LINE 1
    5 763318 VALVE, VACUATOR 1

      

    Item Part Number Description Qty Needed
    1 603807 CAP, 3.5" RATCHETING GAS 2
    2 607876 FUEL TANK ASM, LH FENDER 1
    3 607877 FUEL TANK ASM, RH FENDER 1
    4 603326 VAPOR LINE, 3/16" 71.5"
    5 015818 FUEL LINE, 1/4" 67"
    6 000323 CLIP, HOSE CLAMP 4
    7 605215 FUEL LINE THERMAL SHIELD 65"
    8 604281 TEE, 3/16" PLASTIC 2
    9 745059 FUEL VALVE 3-WAY 1
    10 604323 VAPOR SYSTEM FILTER 1
    11 036236 CS .312-18X1.000HXG5 3
    12 079210 FW 0.344X1.0X0.06 ZN 3
    13 043570 CLIP - HOSE - SINGLE(FS) 3
    14 016832 NT .312-18FLKG5 3
    15 712919 FW 0.406X1.00X.12 HD ZN 10
    16 055822 CS .375-16X0.75 HX G5 ZN 10
    17 055947 CS .250-20X0.50 HX G5 ZN 4
    18 768515 FW 0.281SAE 4
    19 123182 COVER, FUEL LINES 1
    20 123181 COVER, FUEL SENDER 1
    21 000331 WIRE TIE, SMALL/SHORT 2

    1. Torque to 16 ft-lbs.

    2. Part of the wire harness.

    FUEL & VAPOR LINE LENGTHS

    A: 19" LEFT TANK TO TEE (VAPOR)

    B: 24" TEE TO TEE (VAPOR)

    C: 22" RIGHT TANK TO TEE (VAPOR)

    D: 6.5" TEE TO FILTER (VAPOR)

    E: 23" LEFT TANK TO VALVE (FUEL)

    F: 44" RIGHT TANK TO VALVE (FUEL)

    G: 22" FUEL LINE THERMAL SHIELD

    H: 43" FUEL LINE THERMAL SHIELD

    Item Part Number Description Qty Needed
    -- 607876 FUEL TANK ASM, LH FENDER 1
    1 605159k SUCTION HOSE SVC KIT 1
    2 604200k GROMMET SVC KIT 2
    3 604287k VENT FITTING SVC KIT 1
    4 607456k SENDER SVC KIT 1

     

    Item Part Number Description Qty Needed
    -- 607877 FUEL TANK ASM, RH FENDER 1
    1 604287k VENT FITTING SVC KIT 1
    2 604200k GROMMET SVC KIT 2
    3 605159k SUCTION HOSE SVC KIT 1
    4 607456k SENDER SVC KIT 1

     

    Section 5: Instrument Panel, Wire Harness & Battery

    Item Part Number Description Qty Needed
    1 604241 WIRE HARNESS 1
    2 055947 CS .250-20X0.50 HX G5 ZN 4
    3 768515 FW 0.281SAE 4
    4 000430 WIRE TIE, SMALL/LONG 1
    5 606466 DECAL, INSTR PANEL 1
    6 555786 SVC, INSTR PANEL 1
    7 036236 CS .312-18X1.000HXG5 3
    8 768523 FW 0.343SAE 3
    9 043570 CLIP - HOSE - SINGLE(FS) 4
    10 016832 NT .312-18FLKG5 3
    11 000331 WIRE TIE, SMALL/SHORT 5
    12 604307 MOUNT, PUSH BUTTON 1
    13 776476 SWITCH, PTO 6201-321 1
    14 607451 GAUGE, DUAL NEEDLE 12V 1
    Not Shown 608041 FUEL GAUGE & SENDER KIT 1
    15 712257 INDICATOR LIGHT, RED(FS) 1
    16 786657 CABLE, CHOKE 1
    17 603523 KNOB 1
    18 601098 CB 10-24 X .500 ZYNC 2
    19 785808 KEY ASSEMBLY 1
    20 045898 IGNITION SWITCH 1
    21 059832 NT #10-24 HX NL ZN 4
    22 604373 RELAY CONTROL MODULE 1
    23 063198 CS #10-24X0.750FLKG5 2
    24 603475 CABLE, THRTL 43" 1
    25 704932 FW 0.219X.50X.05 ZN 2
    26 114052 KIT, CLUTCH CONN. REP. 1
    27 601047 HOLDER, FUSE 1

    1. Part of the wire harness.

    2. Part of the Battery Assembly.

    3. Part of the Fuel Assembly.

    4. 607451 is used on mowers S/N 20070912 & HIGHER. 608041 is used on mowers S/N PRIOR TO 20070912.

    5. The instrument panel includes the decal.

    Item Part Number Description Qty Needed
    1 794156 CS .250-20X2.750HXG5 1
    2 601930 CS .250-20 X 6.50 HX G5 1
    3 768515 FW 0.281SAE 2
    4 029868 LW .250 INTEXT ZN 4
    5 024927 NT .250-20HXG5 2
    6 771428 BATTERY CBL BOOT-RED(FS) 1
    7 604178 STRAP, TIE DOWN 1
    8 055939 CS .250-20X0.75 HX G5 ZN 2
    9 000331 WIRE TIE, SMALL/SHORT 4
    10 124384-1 SUPPORT, CABLE 1
    11 768523 FW 0.343SAE 5
    12 036236 CS .312-18X1.000HXG5 1
    13 034272 NT .312-18HXG5 2
    14 034280 CS .312-18X0.750HXG5 2
    15 016832 NT .312-18FLKG5 1

    1. When performing service on the mower, disconnect the negative battery cable (black) and do not reconnect it to the battery until ready to start the engine.

    Section 6: Deck, Deck Belt, Blades & Deck Lift

    Item Part Number Description Qty Needed
    1 553684 60" RD SERVICE DECK 1
    2 603391 DECAL, RUBBER FLAP 2
    3 781419 DECAL, BELT ROUTING 1
    4 604222 DECAL, DANGER / OBJECTS 2
    5 786277 DECAL, 60 DECK ID 1

    1. The deck includes the decals.

    Item Part Number Description Qty Needed
    1 025007 CS .62511X1.750HXG5 2
    2 028118 FW 0.625X1.00X.13 ZN 5
    3 606460 GUIDE, BELT 1
    4 608144 SHIELD, DUST 2
    5 602821 IDLER, 6.0" COMMERCIAL 2
    6 034280 CS .312-18X0.750HXG5 4
    7 604252 FW .340X.68X.04 ZN 4
    8 602936 IDLER SLIDE, UHMW 2
    9 350884 SLIDE, DECK IDLER 1
    10 781302 IDLER SPRING 1
    11 373191 CHAIN, 21 LINK 1
    12 705954 CS .500-13X1.25 HX G5 ZN 9
    13 752386 CW .505 X 1.625 X .140 3
    14 212472 KEY 1/4 SQ X 1.00 LG(FS) 3
    15 770842 PULLEY, DECK DRIVE 3
    16 045765 FW 1.030X1.50X.13 HD ZN 3
    17 607409-4 DUST SHIELD 3
    18 017616 CS .500-13X1.750HXG5 6
    19 767962 FW .531 x 1.063 x .175 12
    20 025015 CS .625-11X2.500HXG5 1
    21 602963 DUST SHIELD, IDLER LG 1
    22 602838 IDLER, 8.0" COMMERCIAL 1
    23 607407 SPINDLE ASSY, DUCTILE 3

    1. Torque to 63-73 ft-lbs.

    Item Part Number Description Qty Needed
    1 025007 CS .62511X1.750HXG5 2
    2 028118 FW 0.625X1.00X.13 ZN 5
    3 606460 GUIDE, BELT 1
    4 608144 SHIELD, DUST 2
    5 602821 IDLER, 6.0" COMMERCIAL 2
    6 034280 CS .312-18X0.750HXG5 4
    7 604252 FW .340X.68X.04 ZN 4
    8 602936 IDLER SLIDE, UHMW 2
    9 350884 SLIDE, DECK IDLER 1
    10 781302 IDLER SPRING 1
    11 373191 CHAIN, 21 LINK 1
    12 705954 CS .500-13X1.25 HX G5 ZN 9
    13 752386 CW .505 X 1.625 X .140 3
    14 212472 KEY 1/4 SQ X 1.00 LG(FS) 3
    15 770842 PULLEY, DECK DRIVE 3
    16 045765 FW 1.030X1.50X.13 HD ZN 3
    17 607409-4 DUST SHIELD 3
    18 017616 CS .500-13X1.750HXG5 6
    19 767962 FW .531 x 1.063 x .175 12
    20 025015 CS .625-11X2.500HXG5 1
    21 602963 DUST SHIELD, IDLER LG 1
    22 602838 IDLER, 8.0" COMMERCIAL 1
    23 607407 SPINDLE ASSY, DUCTILE 3

    1. Torque to 63-73 ft-lbs.

    Item Part Number Description Qty Needed
    -- 607407 SPINDLE ASSY, DUCTILE 1
    1 607477 GREASE ZERK 1
    2 607478 RELIEF FITTING 1
    3 607955 BEARING 2

     

    Item Part Number Description Qty Needed
    1 123395 PULLEY COVER, RH 1
    2 123394 PULLEY COVER, LH 1
    3 792002 KNOB,5/16-18 X 3/4"MALE 4
    4 604494 DECK BELT 1
    5 605376 DECK BUMPER 2
    6 079210 FW 0.344X1.0X0.06 ZN 4
    7 604251 NT .312-18 HXNL JAM G2ZN 4
    8 601069 CN .312-18x.200 MAX THK 4
    9 016253 CB .312-18X .750 FUL ZN 4
    10 086660 NT .375-16NLG8 6
    11 767954 FW 0.379X.82X.06 HD ZN 9
    12 123508 CLAMP, RD 2
    13 606505 RUBBER, RD DISCHARGE 2
    14 025395 CB .375-16X 1.00 G5 ZN 6
    15 015495 GREASE FITTING STRAIGHT 2
    16 011320 CB .375-16X .750 STD ZN 3
    17 055822 CS .375-16X0.75 HX G5 ZN 3
    18 016899 NT .375-16 FLKG5 3
    19 123396 PUSHER, W/A 1
    20 602341 WHEEL, ANTI-SCALP 1
    21 602344 SPACER, ANTI- SCALP 5.73 1
    22 767962 FW .531 x 1.063 x .175 9
    23 781567 NT .500-13NLG5 3
    24 602338 CB .50-13 X 7.50 STD ZN 1
    25 602345 SPACER, ANTI-SCALP 3.22 2
    26 602263 WHEEL, ANTI-SCALP 2
    27 607288 CB .50-13X4.75 STD ZN 2
    28 123510 CUT-OFF, W/A 1
    29 123509 CUT-OFF, W/A 1
    30 123511 CUT-OFF, W/A 1
    31 600901 BLADE, F20.50"-L-F-CW 3
    Not Shown 600901x 10PK BLADE, 20.50"-L-F-C 1
    Not Shown 794214 BLADE,20.50"-MUL-F-CW 3
    Not Shown 794214x 10PK BLADE, 20.50"-MUL-F 1
    Not Shown 794230 BLADE,20.50"GAT-F-CW 3
    Not Shown 794230x 10PK BLADE, 20.50"-GAT-F 1
    32 782474 CW .678 X 2.250 X .187 3
    33 781872 CS .625-11X1.250HXG5 3

    1. Torque to 3–6 ft-lbs.

    2. Torque to 118 ft-lbs.

    Item Part Number Description Qty Needed
    1 058776 NT .312-18NLG5 10
    2 768523 FW 0.343SAE 16
    3 778399 FW .781X1.38X.25 ZN 2
    4 123525 CHUTE BRACKET 1
    5 123526 CHUTE BRACKET 1
    6 064014 CS .312-18X0.875HXG5 6
    7 606614 RUBBER, SIDE 2
    8 016253 CB .312-18X .750 FUL ZN 4
    9 123528 REAR SHIELD 1
    10 123530 REAR SHIELD SUPPORT 2
    11 712919 FW 0.406X1.00X.12 HD ZN 8
    12 055822 CS .375-16X0.75 HX G5 ZN 8
    13 123529 REAR SHIELD 2 1
    1. Part of the Deck Lift Assembly.

     

    Item Part Number Description Qty Needed
    1 606918 MAGNETIC PIN, 1/2 x 3.13 1
    2 086660 NT .375-16NLG8 1
    3 767954 FW 0.379X.82X.06 HD ZN 7
    4 718288 FW .516X.88X.09 ZN 7
    5 124361-4 LATCH HANDLE 2
    6 117489 SPACER, LATCH 1
    7 124357-1 DECK HEIGHT W/A 1
    8 604075 SPACER, CYLINDER 1
    9 017251 CP .156DX1.000 LG HML Z 3
    10 025965 CE .500X3.50 .156X3.34 2
    11 041848 CB .375-16X 3.500 FUL Z 1
    12 054502 NT .375-16HXG5 4
    13 606895 SLIDER, DECK LIFT 1
    14 068056 CE .500X1.50 .150X1.32 1
    15 122994 DECK HEIGHT LINK, W/A 1
    16 124291-1 PEDAL W/A 1
    17 004168 FW .531x1.00x.090 ZN 5
    18 074252 CS .500-13X1.50 HX G5 ZN 1
    19 025395 CB .375-16X 1.00 G5 ZN 4
    20 036244 CS .375-16X1.00 HX G5 ZN 2
    21 761544 CS .500-13X2.250HXG8 6
    22 122996 LINK SPACER 1
    23 122987 DECK LIFT LINK, W/A 1
    24 781567 NT .500-13NLG5 5
    25 606316 NT 0.563-18 NLGC 4
    26 606292 DECK LEVEL SPACER 4
    27 061101 NT .750-10 HX ZN NL GR B 2
    28 025296 FW .760X1.63X0.08 ZN 4
    29 789115 CS .750-10X3.500HXG5 2
    30 607979 DECK LEVEL PIVOT 4
    Not Shown 606291 DECK LEVEL PIVOT 4
    31 606290 W/A DECK LEVEL ROD END 4
    32 767962 FW .531 x 1.063 x .175 8
    33 606454 SPRING, EXT 7.0 300LB/IN 2
    34 606478 EB, .500-13X3.00 FULTHD 2
    35 008193 NT .500-13HXG5 4

    1. 607979 is used on mowers S/N 20093674 & HIGHER. 606291 is used on mowers S/N PRIOR TO 20093674.

    Section 7: Seat & ROPS

    Item Part Number Description Qty Needed
    1 607706 SEAT, I3M SEATS INC 1
    2 555027 SVC, SEAT PAN 1
    3 605688 DECAL, LEVEL FUEL FILL 1
    4 785188 DECAL, Z ARMREST WARNING 1
    5 712927 FW 0.344X1.00X.12 HD ZN 4
    6 058776 NT .312-18NLG5 4
    7 086660 NT .375-16NLG8 4
    8 767954 FW 0.379X.82X.06 HD ZN 10
    9 052860 CS .375-16X1.25 HX G5 ZN 3
    10 724716 WASHER, FIBER (FS) 1
    11 350421 SEAT PAN STOP (PLATED) 1
    12 036244 CS .375-16X1.00 HX G5 ZN 1
    13 601650 VIBRATION MOUNT 70DURO 2
    14 054502 NT .375-16HXG5 2
    15 785139 DECAL, STEERING L.S. 1
    16 550823 FRAME COVER LS, SERVICE 1
    17 600899 DECAL, PUMP BELT WARNING 1
    18 601069 CN .312-18x.200 MAX THK 5
    19 768523 FW 0.343SAE 7
    20 064014 CS .312-18X0.875HXG5 5
    21 550824 FRAME COVER RS, SERVICE 1
    22 785220 DECAL, STEERING R.S. 1
    23 016253 CB .312-18X .750 FUL ZN 2
    24 605907 LATCH ASSEMBLY 1
    25 601815 DECAL, BATTERY WARNINGS 1
    26 034272 NT .312-18HXG5 2
    27 000331 WIRE TIE, SMALL/SHORT 2
    28 606894 DECAL, DECK HEIGHT 1
    29 554563 SVC, FLOOR PAN 1
    30 118900 SPACER, DECK LIFT LINK 1

    1. Do not torque; the seat pan and seat pan stop must pivot freely.

    2. Torque to 17 ft-lbs.

    3. The seat pan, frame covers, and floor pan include the decals

    Item Part Number Description Qty Needed
    Not Shown 607706 SEAT, I3M SEATS INC 1
    1 607707 SVC, SEAT BACK COVER 1
    2 608351 SVC, SEAT FOAM I3M 1
    3 607708 SVC, SEAT CUSHION COVER 1
    4 607166 SVC, ARM REST KIT 1
    5 606081 SVC, ARM PAD 2
    6 607207 SVC, SEAT BELT 1
    7 607206 SVC, KNOB KIT 1
    8 607205 SVC, BELLOWS 1
    9 606082 SVC, OPS 1
    10 607204 SVC, TRACK KIT 1

     

    Item Part Number Description Qty Needed
    1 608230 SVC, ROPS ASSY 1
    2 608126 SVC, ROPS ISOLATOR ASM 2
    3 608125 ROPS HARDWARE KIT 1
    4 061812 CS .500-13X3.50 HX G5 ZN 4
    5 767962 FW .531 x 1.063 x .175 8
    6 023317 NT .500-13UNTG8 4

    1. Torque to 73 ft-lbs

    If you need help finding parts for your equipment give us a call during business hours and one of our experts will be happy to assist you.

    410-692-5170