All Hustler Parts Diagrams

Welcome to the Hustler Super Z parts lookup page. All parts are OEM replacement parts from the Hustler Turf Warehouse in Heston, Kansas. This section is for the following Hustler Super Z model numbers:

936948US

All parts listed below are available and ship same day if in stock. If the parts are not in stock, lead time is 3 days. If you have any questions or would like help with parts lookup, give us a call and we will be happy to help!

410-692-5170

Section 1: Frame, Muffler Guard & Engine Guard Frame Engine Guard	Section 2: Hydraulic System, Drive Belt, Clutch, Steering & Brake Hydraulic System Assembly Hydraulic Filter & Reservoir Assembly Wheel Motor Assembly LS Pump Assembly RS Pump Assembly Oil Cooler Mount-S/N 20103450 & Higher Oil Cooler Mount-S/N Prior to 20103450 Pump Drive, Drive Belt & Clutch Steering Steering Assembly Steering Box Assembly
Section 3: Wheels & Tires Wheels & Tires Front Wheel Assembly Breakdown Drive Wheel Breakdown (66" & 72" Mower)	Section 4: Engine, Muffler & Fuel System Engine & Muffler Engine Service Parts-KOH ECV 880 Fuel & Vapor Systems Fuel Tank Service Parts
Section 5: Battery, Instrument Panel & Wire Harness Instrument Panel & Wire Harness Battery
Section 6: Deck, Deck Belt, Blades & Deck Lift Service Deck Deck Pulleys & Spindles-S/N 20094963 & Higher Deck Pulleys & Spindles-S/N Prior to 20094963 Spindle Assembly Service Parts-607407 Deck Belt, Discharge Chute, Pulley Covers & Blades Deck Lift & Deck Height
Section 7: Seat & ROPS Seat Seat Service Parts-Suspension ROPS

 

Section 1: Frame, Muffler Guard & Engine Guard

Item	Part Number	Description	Qty Needed
1	554262	SVC FRAME 72"	1
2	781880	BUMPER, .500x 1.00x .31	4
3	N/A	SERIAL NUMBER / SPEC DECAL	3
4	600961	RIVET NUT, 1/2-13 THREAD	4
5	808493	RIVET NUT, 3/8-16 THREA	2
6	602041	DECAL, HOT	2
7	602407	DECAL, HUSTLER ID	1
8	601993	DECAL, SAFE OPERATION	1
9	015495	GREASE FITTING STRAIGHT	4

1. Serial number decal. In the event the serial number decal becomes damaged or illegible, please contact your dealer to order a replacement.

2. EPA compliance decal.

3. Patent numbers decal.

4. The frame includes decals, rivet nuts, and bumpers.

Item	Part Number	Description	Qty Needed
1	602263	WHEEL, ANTI-SCALP	2
2	602345	SPACER, ANTI-SCALP 3.22	2
3	068239	CS .500-13X4.500HXG5	2
4	767962	FW .531 x 1.063 x .175	8
5	377994	HEAT SHIELD, MMZ ROLLER	2
6	008193	NT .500-13HXG5	2
7	086660	NT .375-16NLG8	4
8	705137	FW 0.391X1.25X.06 ZN	8
9	554293	SVC, ENGINE GUARD	1
10	606807	DECAL, H LOGO	1
11	705954	CS .500-13X1.25 HX G5 ZN	4
12	016899	NT .375-16 FLKG5	4
13	025395	CB .375-16X 1.00 G5 ZN	4
14	124218-3	MUFFLER GUARD	1
15	606658	PLASTIC BUMPER, LH	1
16	036244	CS .375-16X1.00 HX G5 ZN	2
17	606657	PLASTIC BUMPER, CENTER	1
18	606659	PLASTIC BUMPER, RH	1
19	705178	CS .375-16X1.750HXG5	2

1. The engine guard includes the decal.

Section 2: Hydraulic System, Drive Belt, Clutch, Steering & Brake

Item	Part Number	Description	Qty Needed
1	N/A	REFER TO THE "HYDRAULIC RESERVOIR BREAKDOWN"	1
2	056069	CS .375-16X0.63 HX G5 ZN	1
3	767954	FW 0.379X.82X.06 HD ZN	6
4	036244	CS .375-16X1.00 HX G5 ZN	2
5	606890	VIBRATION MOUNT	1
6	008193	NT .500-13HXG5	4
7	767962	FW .531 x 1.063 x .175	12
8	N/A	REFER TO THE "RS PUMP ASSEMBLY BREAKDOWN"	1
9	N/A	REFER TO THE "LS PUMP ASSEMBLY BREAKDOWN"	1
10	054502	NT .375-16HXG5	3
11	N/A	REFER TO THE "WHEEL MOTOR ASSEMBLY BREAKDOWN"	2
12	023317	NT .500-13UNTG8	8
13	602256	CS .500-13X2.500 SQ G5	8
14	028274	CB .500-13X 1.500 FULL	4

1. Part of the Oil Cooler Mount assembly.

 

Item	Part Number	Description	Qty Needed
1	032763	CAP, BREATHER	1
2	032771	STRAINER	1
3	606088	RESERVOIR, HYDRAULIC	1
4	700484	CLAMP, HOSE (FS)	4
5	603045	HOSE, PUMP SUCTION	2
6	601523	FTG, -8MORB/-8BT STR	1
7	601001	SPRING CLAMP, .75" DIA	2
8	603819	HOSE ASSY, COOLER-TANK	1
9	781658	FTG, -8MORB/HEX PLUG	1
10	602768X	HYDRAULIC OIL FILTER	1

 

Item	Part Number	Description	Qty Needed
1	606089	MOTOR, TG0310 HOS - HH	1
2	781526	FTG, 90°-10MORB/-8MORFS	2
3	065516	ROSS NUT	1
4	064337	ROSS WOODRUFF KEY	1
5	748806	ROSS VITON SEAL KIT	1

 

Item	Part Number	Description	Qty Needed
1	605759	PUMP, H-G PY W/HOS-LS HH	1
2	601001	SPRING CLAMP, .75" DIA	4
3	606102	HOSE, PUMP DRAIN	1
4	606101	HOSE, PUMP DRAIN	1
5	606100	FTG, T -8 MORB/BT/BT	1
6	744854	O-RING TUBE ADAPTER 45	1
7	008581	CS .250-20X1.500HXG5	1
8	768515	FW 0.281SAE	1
9	604831	PUMP ARM, SZ	1
10	068551	NT .250-20 HXZY NL	1
11	781542	FTG, 90°-8MORB/-8MORFS	2
12	604334	TUBE, LP-TM LT LOOP	1
13	604335	TUBE, RP-BM LT LOOP	1
14	784983	SEAL KIT, PW PUMPS	1

1. Torque to 8.2 ft-lbs.

Item	Part Number	Description	Qty Needed
1	605760	PUMP, H-G PY W/HOS-RS-HH	1
2	744854	O-RING TUBE ADAPTER 45	1
3	601523	FTG, -8MORB/-8BT STR	1
4	781542	FTG, 90°-8MORB/-8MORFS	2
5	604333	TUBE, LP-TM RT LOOP	1
6	604332	TUBE, RP-BM RT LOOP	1
7	008581	CS .250-20X1.500HXG5	1
8	768515	FW 0.281SAE	1
9	604831	PUMP ARM, SZ	1
10	068551	NT .250-20 HXZY NL	1
11	784983	SEAL KIT, PW PUMPS	1

1. Torque to 8.2 ft-lbs

Item	Part Number	Description	Qty Needed
1	124296-1	W/A, OIL COOLER MOUNT	1
2	056077	CS .250-20X1.000HXG5	8
3	768515	FW 0.281SAE	16
4	016253	CB .312-18X .750 FUL ZN	2
5	767954	FW 0.379X.82X.06 HD ZN	8
6	054502	NT .375-16HXG5	4
7	109401	SCREEN, OIL COOLER	1
8	608007	OIL COOLER	1
9	601357	FAN, ELECTRIC 8" 12VDC	1
10	601538	FOOT, ELECTRIC FAN	4
11	068551	NT .250-20 HXZY NL	8
12	123687-3	AIR DEFLECTOR	1
13	016832	NT .312-18FLKG5	2
14	036244	CS .375-16X1.00 HX G5 ZN	4
15	706531	GM 1.12X1.75X1.37X.12	2
16	000430	WIRE TIE, SMALL/LONG	5

1. Torque to 5 ft-lbs.

Item	Part Number	Description	Qty Needed
1	124296-1	W/A, OIL COOLER MOUNT	1
2	704163	CS .250-20X2.000HXG5	4
3	768515	FW 0.281SAE	16
4	016253	CB .312-18X .750 FUL ZN	2
5	767954	FW 0.379X.82X.06 HD ZN	8
6	054502	NT .375-16HXG5	4
7	109401	SCREEN, OIL COOLER	1
8	601356	S/C TO 608007	1
--	608007	OIL COOLER	1
9	601357	FAN, ELECTRIC 8" 12VDC	1
10	056077	CS .250-20X1.000HXG5	4
11	601538	FOOT, ELECTRIC FAN	4
12	068551	NT .250-20 HXZY NL	8
13	123687-3	AIR DEFLECTOR	1
14	016832	NT .312-18FLKG5	2
15	036244	CS .375-16X1.00 HX G5 ZN	4
16	706531	GM 1.12X1.75X1.37X.12	2
17	000430	WIRE TIE, SMALL/LONG	5

1. Torque to 5 ft-lbs.

 

Item	Part Number	Description	Qty Needed
1	051151	CS .500-13X5.000HXG5	1
2	344267	FW .510X2.15X.19 ZN	1
3	212076	KEY 1/4 SQ X 1.50 LG(FS)	1
4	791251	HARNESS, CLUTCH PIGTAIL	1
5	603734	PULLEY 6.67 OPX1.125SHFT	1
6	606936K	CLUTCH KIT, CMS250	1
7	602680	FW .453X1.12X.12 HRD ZN	1
8	785048	CS .437-20X3.00 HXG5 P85	1
9	034272	NT .312-18HXG5	2
10	768523	FW 0.343SAE	4
11	113347	CLUTCH ANCHOR	1
12	036236	CS .312-18X1.000HXG5	2
13	083196	SS .312-18X0.750SQ	4
14	602754	PULLEY 7.35 OPx0.875SHFT	2
15	210146	KEY 1/4 SQ X 1.12 LONG	2
16	767954	FW 0.379X.82X.06 HD ZN	2
17	054502	NT .375-16HXG5	2
18	025007	CS .62511X1.750HXG5	1
19	603783	PULLEY, 6" FLAT IDLER	1
20	602880	BUSHING, IDLER PIVOT	1
21	115536	S/C TO 608005	1
Not Shown	608005	TENSIONER CAST	1
22	602879	BUSHING, IDLER PIVOT	1
23	767962	FW .531 x 1.063 x .175	1
24	781567	NT .500-13NLG5	1
25	015495	GREASE FITTING STRAIGHT	1
26	601016	IDLER SPRING	1
27	601486	EB, .375-16X3.00 FULTHD	1
28	604208	DRIVE BELT	1

1. Torque to 45–48 ft-lbs. Replace (do not reuse) the cap screw if it is removed or loosened. Use only hand tools to install this fastener.

2. Torque to 12–15 ft-lbs.

3. Torque to 71–75 ft-lbs. The tensioner should pivot freely.

Item	Part Number	Description	Qty Needed
1	N/A	REFER TO "STEERING SUB-ASSEMBLY"	1
2	605670	DECAL, SUPER Z ID	1
3	605924	STEERING BAR W/A	2
Not Shown	781260	GRIP, STEERING BAR	2
4	036244	CS .375-16X1.00 HX G5 ZN	4
5	767954	FW 0.379X.82X.06 HD ZN	8
6	055822	CS .375-16X0.75 HX G5 ZN	4
7	601087	SWITCH, PLUNGER N.O.	2
8	016899	NT .375-16 FLKG5	4
9	795351	DAMPER, CENTERING	2
10	781922	BALL STUD	2
11	768523	FW 0.343SAE	6
12	029876	LW .312 INTEXT ZN	2
13	016832	NT .312-18FLKG5	2
14	023655	NT 0.312-24 NL G8	2
15	781153	BUSHING, UHMW	4

1. The handle includes the grip.

Item	Part Number	Description	Qty Needed
1	604297	STEERING BOX SUB, RH	1
2	604298	STEERING BOX SUB, LH	1
3	023655	NT 0.312-24 NL G8	2
4	768523	FW 0.343SAE	6
5	034272	NT .312-18HXG5	2
6	781922	BALL STUD	2
7	712927	FW 0.344X1.00X.12 HD ZN	2
8	781286	PUMP ROD ADJUSTER ASSY	2
9	550818	STEERING COVER, SERVICE	1
10	608000	BUSHING	2
11	603078	FW .750X1.50X.16 ZN	2
12	784439	LOCK COLLAR,0.757 ID(FS)	2
13	113007	STEER PIVOT TUBE, SZ	1
14	080358	GM .50X1.00X.75X.12	1
15	053199	NT .500-13JAMG5	2
16	603055	SS .500-13X 2.50 SH ZN	2
17	722199P	POLYURETHANE 2" FS - 1 FT	1

WEAR TAPE LENGTH A: 5.5" +/- 0.3"

1. The steering cover includes the decal.

Item	Part Number	Description	Qty Needed
1	607151	STEERING ARM W/A	1
2	086660	NT .375-16NLG8	3
3	767954	FW 0.379X.82X.06 HD ZN	6
4	705178	CS .375-16X1.750HXG5	3
5	112899	STEERING BOX W/A LH	1
--	112898	STEERING BOX W/A, RH	1
6	608000	BUSHING	2
7	348862	STEERLEVER BUSHING (PLA	2
8	047456	GM .750X.188X1.00X.12	1
9	797738	SS .500-13X2.000SH	1

1. Torque all hardware to 33 ft-lbs ± 10%.

 

Section 3: Wheels & Tires

Item	Part Number	Description	Qty Needed
1	606969	TIR/WHL 24X12.00-12 SLV	2
2	061077	WHEEL NUT	10
3	606711	DUST CAP	2
4	061101	NT .750-10 HX ZN NL GR B	2
5	606715	CW 0.766 X 1.50 X .093	6
6	606712	BEARING, TAPERED ROLLER	4
7	606713	RACE, TAPERE ROLLER	4
8	606817	GREASE PLUG	2
9	606714	SEAL, 1.25 X 1.98	2
10	N/A	REFER TO THE "FRONT WHEEL ASSEMBLY BREAKDOWN"	2
11	068239	CS .500-13X4.500HXG5	2
12	767962	FW .531 x 1.063 x .175	4
13	602263	WHEEL, ANTI-SCALP	2
14	602345	SPACER, ANTI-SCALP 3.22	2
15	008193	NT .500-13HXG5	2

1. Torque to 65–75 ft-lbs.

2. Torque to 40 ft-lbs, then back off ¼ turn. Reference the General Service Manual for bearing maintenance procedures.

3. 606969 is used on mowers S/N 17116358 & higher. 784058 is used on mowers prior to S/N 17116358.

Item	Part Number	Description	Qty Needed
1	123644-1	W/A, CASTER FORK	1
2	061101	NT .750-10 HX ZN NL GR B	1
3	025296	FW .760X1.63X0.08 ZN	2
4	041475	CS .750-10X9.50 HX G5 ZN	1
5	606744	TIR/WHL 13X6.50-6 SLV	1
6	604843	TIR 13X6.50-6 B4R SMTH	1
7	606751	WHL 6X4.50 SLV	1
8	606815	DUST CAP, 0.752 ID	2
9	606778	SPACER, 0.531	2
10	606780	SEAL	2
11	606753	BEARING, TAPERED ROLLER	2
12	606126	GREASE FITTING, M8X1.0	1
13	019521	TIRE VALVE TR-412 GOODY	1

1. Tighten, then back off the nut until the wheel spins freely.

2. Refer to the General Service Manual for wheel bearing service procedures.

 

Item	Part Number	Description	Qty Needed
1	781245	S/C TO 606967	1
2	606819	WHL 12X8.50 5X4.5 SLV	1
3	019521	TIRE VALVE TR-412 GOODY	1

 

Section 4: Engine, Muffler & Fuel System

Item	Part Number	Description	Qty Needed
1	--	ENGINE, KOH ECV 880	1
2	720516	CS M8-1.25X16HX FL10.9	3
3	605828	MUFFLER, KOH 824 ECV	1
4	034272	NT .312-18HXG5	2
5	768523	FW 0.343SAE	5
6	045088	HOSE CLAMP 1" (FS)	1
7	602827	CB .312-18X 1.250 ZN	1
8	767954	FW 0.379X.82X.06 HD ZN	4
9	602580	CS .375-16X1.25HXG8ZYP85	4
10	000331	WIRE TIE, SMALL/SHORT	4
11	793885	LW .375 INTEXT ZN	1
12	606440	BATTERY CABLE, NEGATIVE	1
13	606439	BATTERY CABLE, POSITIVE	1
14	000323	CLIP, HOSE CLAMP	2
15	015818P	FUEL LINE, 1/4" - 6 FT	1
16	036236	CS .312-18X1.000HXG5	3
17	124221-3	BRACKET, FUEL LINE	1
18	016832	NT .312-18FLKG5	3
19	043570	CLIP - HOSE - SINGLE(FS)	1
20	605215P	THERMAL SHIELD - 6 FT	1
21	603326P	VAPOR LINE, 3/16" - 7 FT	1

1. Part of the wire harness.

2. Supplied with the engine.

3. Torque to 12 ft-lbs plus 60° rotation of the cap screw head. Use only hand tools to install this fastener.

4. Torque to 17 ft-lbs.

5. Torque to 14 ft-lbs.

FUEL & VAPOR LINE LENGTHS

A: 17" VALVE TO ENGINE (FUEL)

B: 17" TEE TO ENGINE (VAPOR)

C: 15" FUEL LINE THERMAL SHIELD

Item	Part Number	Description	Qty Needed
1	602587	AIR FILTER - MAIN	1
2	602586	AIR FILTER - SAFETY	1
3	068478	FUEL FILTER - IN LINE	1
4	606095	ENGINE OIL FILTER	1

 

Item	Part Number	Description	Qty Needed
1	603807	CAP, 3.5" RATCHETING GAS	2
2	607676	S/C TO 607877	1
Not Shown	607877	FUEL TANK ASM, RH FENDER	1
3	607675	S/C TO 607876	1
Not Shown	607876	FUEL TANK ASM, LH FENDER	1
4	000323	CLIP, HOSE CLAMP	4
5	015818P	FUEL LINE, 1/4" - 6 FT	67"
6	605215P	THERMAL SHIELD - 6 FT	65"
7	000331	WIRE TIE, SMALL/SHORT	1
8	745059	FUEL VALVE 3-WAY	1
9	767954	FW 0.379X.82X.06 HD ZN	10
10	055822	CS .375-16X0.75 HX G5 ZN	10
11	055947	CS .250-20X0.50 HX G5 ZN	4
12	768515	FW 0.281SAE	4
13	123182	COVER, FUEL LINES	1
14	123181	COVER, FUEL SENDER	1
15	603326P	VAPOR LINE, 3/16" - 7 FT	80"
16	604281	TEE, 3/16" PLASTIC	1
17	604314	CARBON CANISTER, 9 GAL	2
18	036236	CS .312-18X1.000HXG5	7
19	768523	FW 0.343SAE	7
20	602980	CLAMP, CUSHIONED 3.0"	4
21	601069	CN .312-18x.200 MAX THK	4
22	079210	FW 0.344X1.0X0.06 ZN	3
23	043570	CLIP - HOSE - SINGLE(FS)	3
24	016832	NT .312-18FLKG5	3
25	603161	VACUUM BREAKER FILTER	1

FUEL LINE LENGTHS

A: 44" RIGHT TANK TO VALVE (FUEL)

B: 43" RIGHT TANK TO VALVE (THERMAL SHIELD)

C: 23" LEFT TANK TO VALVE (FUEL)

D: 22" LEFT TANK TO VALVE (THERMAL SHIELD)VAPOR LINE LENGTHS

E: 26" RIGHT TANK TO RIGHT CARBON CANISTER (VAPOR)

F: 9" RIGHT CARBON CANISTER TO TEE (VAPOR)

G: 15" LEFT CARBON CANISTER TO TEE (VAPOR)

H: 30" LEFT TANK TO LEFT CARBON CANISTER (VAPOR)

1. Torque to 16 ft-lbs.

2. Part of the wire harness.

Item	Part Number	Description	Qty Needed
1	607676	S/C TO 607877	1
--	607877	FUEL TANK ASM, RH FENDER	1
2	603888K	SVC KIT, FUEL SENDER	1
--	608041	FUEL GAUGE & SENDER KIT	1
3	605648K	TANK GROMMET SVC KIT	2
4	604287K	VENT FITTING SVC KIT	2
5	604200K	GROMMET SVC KIT	4
6	605159K	SUCTION HOSE SVC KIT	2
7	607675	S/C TO 607876	1
--	607876	FUEL TANK ASM, LH FENDER	1

 

Section 5: Battery, Instrument Panel & Wire Harness

Item	Part Number	Description	Qty Needed
1	606068	GAUGE, FUEL/HOURMETER	1
2	776476	SWITCH, PTO 6201-321	1
3	603523	KNOB	1
4	785808	KEY ASSEMBLY	1
5	045898	IGNITION SWITCH	1
6	712257	INDICATOR LIGHT, RED(FS)	2
7	604373	RELAY CONTROL MODULE	1
8	059832	NT #10-24 HX NL ZN	4
9	601098	CB 10-24 X .500 ZYNC	2
10	063198	CS #10-24X0.750FLKG5	2
11	603847	CABLE, THROTTLE 50.0"	1
12	704932	FW 0.219X.50X.05 ZN	2
13	055947	CS .250-20X0.50 HX G5 ZN	4
14	768515	FW 0.281SAE	4
15	606467	DECAL, INSTR PANEL	1
16	553846	SVC, INSTR PANEL	1
17	000430	WIRE TIE, SMALL/LONG	1
18	034280	CS .312-18X0.750HXG5	1
19	768523	FW 0.343SAE	2
20	043570	CLIP - HOSE - SINGLE(FS)	1
21	034272	NT .312-18HXG5	1
22	606165	WIRE HARNESS	1
23	000331	WIRE TIE, SMALL/SHORT	3
24	114052	KIT, CLUTCH CONN. REP	1
25	601047	HOLDER, FUSE	1

1. Part of the wire harness.

2. The instrument panel includes the decal.

Item	Part Number	Description	Qty Needed
1	000331	WIRE TIE, SMALL/SHORT	3
2	124387-1	BATTERY STRAP, SZ GRP 45	1
3	050823	CS .312-18X5.000HXG5	2
4	768523	FW 0.343SAE	2
5	601069	CN .312-18x.200 MAX THK	2

1. When performing service on the mower, disconnect the negative battery cable and do not reconnect it to the battery until ready to start the engine.

Section 6: Deck, Deck Belt, Blades & Deck Lift

Item	Part Number	Description	Qty Needed
1	554034	72" SERVICE DECK	1
2	601069	CN .312-18x.200 MAX THK	4
3	604221	DECAL, DANGER / CHUTE	1
4	781419	DECAL, BELT ROUTING	1
5	603092	DECAL, VX4 TECHNOLOGY	1
6	786285	DECAL, 72 DECK ID	1
7	604222	DECAL, DANGER / OBJECTS	1

1. The deck includes decals and hardware.

Item	Part Number	Description	Qty Needed
1	025007	CS .62511X1.750HXG5	1
2	606460	GUIDE, BELT	1
3	608144	SHIELD, DUST	2
4	602821	IDLER, 6.0" COMMERCIAL	2
5	028118	FW 0.625X1.00X.13 ZN	2
6	350884	SLIDE, DECK IDLER	1
7	781302	IDLER SPRING	1
8	373191	CHAIN, 21 LINK	1
9	603023	WN .312-18 ZN	4
10	602936	IDLER SLIDE, UHMW	2
11	016972	NT .625-11 HX G5 ZN	2
12	602963	DUST SHIELD, IDLER LG	1
13	602743	IDLER, 10.0" COMMERCIAL	1
14	705954	CS .500-13X1.25 HX G5 ZN	15
15	752386	CW .505 X 1.625 X .140	3
16	602746	PULLEY, DRIVE 8.41 EFF	3
17	045765	FW 1.030X1.50X.13 HD ZN	3
18	607409-4	DUST SHIELD	3
19	015495	GREASE FITTING STRAIGHT	2
20	113340	PUSHER W/A, HZ/SZ	1
21	767954	FW 0.379X.82X.06 HD ZN	6
22	086660	NT .375-16NLG8	6
23	767962	FW .531 x 1.063 x .175	15
24	025395	CB .375-16X 1.00 G5 ZN	6
25	607288	CB .50-13X4.75 STD ZN	2
26	602345	SPACER, ANTI-SCALP 3.22	2
27	602263	WHEEL, ANTI-SCALP	2
28	781567	NT .500-13NLG5	3
29	602344	SPACER, ANTI- SCALP 5.73	1
30	602341	WHEEL, ANTI-SCALP	1
31	602338	CB .50-13 X 7.50 STD ZN	1
32	782474	CW .678 X 2.250 X .187	2
33	783738	CS .625-11X3.000HXG5	2
34	603022	CS .312-18X.625 BH ZN	4
35	212472	KEY 1/4 SQ X 1.00 LG(FS)	3
36	607407	SPINDLE ASSY, DUCTILE	3

1. Torque to 67–75 ft-lbs.

Item	Part Number	Description	Qty Needed
1	025007	CS .62511X1.750HXG5	1
2	606460	GUIDE, BELT	1
3	608144	SHIELD, DUST	2
4	602821	IDLER, 6.0" COMMERCIAL	2
5	028118	FW 0.625X1.00X.13 ZN	2
6	350884	SLIDE, DECK IDLER	1
7	781302	IDLER SPRING	1
8	373191	CHAIN, 21 LINK	1
9	603023	WN .312-18 ZN	4
10	602936	IDLER SLIDE, UHMW	2
11	016972	NT .625-11 HX G5 ZN	2
12	602963	DUST SHIELD, IDLER LG	1
13	602743	IDLER, 10.0" COMMERCIAL	1
14	705954	CS .500-13X1.25 HX G5 ZN	15
15	752386	CW .505 X 1.625 X .140	3
16	602746	PULLEY, DRIVE 8.41 EFF	3
17	045765	FW 1.030X1.50X.13 HD ZN	3
18	607409-4	DUST SHIELD	3
19	015495	GREASE FITTING STRAIGHT	2
20	113340	PUSHER W/A, HZ/SZ	1
21	767954	FW 0.379X.82X.06 HD ZN	6
22	086660	NT .375-16NLG8	6
23	767962	FW .531 x 1.063 x .175	15
24	025395	CB .375-16X 1.00 G5 ZN	6
25	607288	CB .50-13X4.75 STD ZN	2
26	602345	SPACER, ANTI-SCALP 3.22	2
27	602263	WHEEL, ANTI-SCALP	2
28	781567	NT .500-13NLG5	3
29	602344	SPACER, ANTI- SCALP 5.73	1
30	602341	WHEEL, ANTI-SCALP	1
31	602338	CB .50-13 X 7.50 STD ZN	1
32	782474	CW .678 X 2.250 X .187	2
33	783738	CS .625-11X3.000HXG5	2
34	603022	CS .312-18X.625 BH ZN	4
35	212472	KEY 1/4 SQ X 1.00 LG(FS)	3
36	607407	SPINDLE ASSY, DUCTILE	3

1. Torque to 67–75 ft-lbs.

Item	Part Number	Description	Qty Needed
--	607407	Spindle	3
1	607477	GREASE ZERK	1
2	607478	RELIEF FITTING	1
3	607955	BEARING	2

 

Item	Part Number	Description	Qty Needed
1	123772-1	PULLEY COVER, RS 72"	1
2	123773-1	PULLEY COVER, LS 72"	1
3	792002	KNOB,5/16-18 X 3/4"MALE	4
4	606875	DECK BELT	1
5	602891	CHUTE, DISCHARGE LG	1
6	602435	SPRING, TORSION	1
7	086660	NT .375-16NLG8	7
8	602432	PIN, CHUTE	1
9	113563	BACKING PLATE W/A	1
10	602817	RUBBER BUMPER	1
11	079210	FW 0.344X1.0X0.06 ZN	2
12	064014	CS .312-18X0.875HXG5	2
13	767954	FW 0.379X.82X.06 HD ZN	6
14	025395	CB .375-16X 1.00 G5 ZN	6
15	123964-1	ADJ BAFFLE RS 72" VX4	1
16	123965-1	ADJ BAFFLE LS 72" VX4	1
17	602857	BLADE, F24.50" EHN-F-CW	3
Not Shown	602857x	6PK BLADE, F24.50" EHNF	1
Not Shown	798702	BLADE, F24.50"-H-F-CW	3
Not Shown	798702x	10PK BLADE, F24.50"-H-F	1
Not Shown	798710	BLADE, 24.50"-MUL-F-CW	3
Not Shown	798710x	10PK BLADE, 24.50"-MUL-F	1
Not Shown	798728	BLADE, 24.50"-GAT-F-CW	3
Not Shown	798728x	10PK BLADE, 24.50"-GAT-F	1
18	114988	SHIELD, BLADE BOLT	1
19	782474	CW .678 X 2.250 X .187	3
20	781872	CS .625-11X1.250HXG5	3

1. Do not torque; the discharge chute must pivot freely.

2. Torque to 118 ft-lbs.

3. Torque to 10 ft-lbs.

Item	Part Number	Description	Qty Needed
1	086660	NT .375-16NLG8	1
2	767954	FW 0.379X.82X.06 HD ZN	7
3	124361-4	LATCH HANDLE	2
4	606918	MAGNETIC PIN, 1/2 x 3.13	1
5	117489	SPACER, LATCH	1
6	124357-1	DECK HEIGHT W/A	1
7	604075	SPACER, CYLINDER	1
8	041848	CB .375-16X 3.500 FUL Z	1
9	718288	FW .516X.88X.09 ZN	7
10	017251	CP .156DX1.000 LG HML Z	3
11	025965	CE .500X3.50 .156X3.34	2
12	606895	SLIDER, DECK LIFT	1
13	068056	CE .500X1.50 .150X1.32	1
14	122994	DECK HEIGHT LINK, W/A	1
15	124147-1	PEDAL WA, DECK LIFT	1
16	080655	CS .375-16X1.500HXG5	2
17	781567	NT .500-13NLG5	2
18	124145-4	W/A, DECK LINK	1
19	122996	LINK SPACER	1
20	025395	CB .375-16X 1.00 G5 ZN	4
21	004168	FW .531x1.00x.090 ZN	5
22	074252	CS .500-13X1.50 HX G5 ZN	1
23	054502	NT .375-16HXG5	4
24	761544	CS .500-13X2.250HXG8	1
25	604254	CB .50-13 X 2.50 STD ZN	1
26	008193	NT .500-13HXG5	4
27	606478	EB, .500-13X3.00 FULTHD	2
28	606454	SPRING, EXT 7.0 300LB/IN	2
29	604232	NT .625-18NLKG5	4
30	603903	DECK LEVEL SPACER	4
31	061101	NT .750-10 HX ZN NL GR B	2
32	025296	FW .760X1.63X0.08 ZN	4
33	789115	CS .750-10X3.500HXG5	2
34	603902	DECK LEVEL PIVOT	4
35	058768	NT .625-11 HXZN NY	4
36	028118	FW 0.625X1.00X.13 ZN	4
37	116732	W/A, DECK LEVEL ROD END	4
38	604043	CS .625-11x2.500FLGG5	4

1. The Top Pin Deck Height Kit includes items 3, 4, 6, & 12.

Section 7: Seat & ROPS